successfully added to cart
View Cart

Notifications

Mark all as read

Heads and Cartridges

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (8)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (8)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (8)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (8)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (8)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (8)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (8)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (8)
  • M Stainless Steel (8)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (8)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (8)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (8)
  • K Cast Iron (8)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (8)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (8)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (8)
  • N Non-Ferrous Materials (8)
    • N1
      Wrought Aluminum
      (8)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (8)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (8)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (8)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (8)
    • N6
      Carbon, Graphite Composites, CFRP
      (8)
    • N7
      MMC's
      (8)
  • S High-Temp Alloys (8)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (8)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (8)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (8)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (8)
  • H Hardened Materials (8)
    • H1
      Hardened Materials 44-48 HRC
      (8)
    • H2
      Hardened Materials 48-55 HRC
      (7)
    • H3
      Hardened Materials 56-60 HRC
      (5)
    • H4
      Hardened Materials >60 HRC
      (5)
Applications
Applications
  • Face Grooving Face Grooving (8)
  • Grooving Grooving (2)
  • ID Grooving ID Grooving (6)
  • ID Thread Turning ID Thread Turning (6)
  • Threading Threading (2)
Type of Thread
Type of Thread
  • 60 (7)
  • ACME (6)
  • API (5)
  • API RD (3)
  • BSW (2)
  • BUTTRESS (7)
  • M (3)
  • NPT (2)
  • STUB ACME (2)
  • UN (7)
  • UNJ (2)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (8)
  • Lightly Interrupted Cut (8)
  • Smooth Cut (8)
  • Varying Depth of Cut (8)
Connection Style
Connection Style
  • Bolt-On Head (6)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (5)
  • 2.0 (6)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.002 in (2)
  • 0.003 in (7)
  • 0.004 in (4)
  • 0.005 in (2)
  • 0.006 in (5)
  • 0.007 in (6)
  • 0.008 in (7)
  • 0.01 in (6)
  • 0.011 in (2)
  • 0.012 in (2)
  • 0.014 in (5)
  • 0.016 in (3)
  • 0.017 in (2)
  • 0.019 in (5)
  • 0.02 in (4)
  • 0.023 in (5)
  • 0.03 in (2)
  • 0.031 in (4)
  • 0.033 in (1)
  • 0.035 in (5)
  • 0.039 in (4)
  • 0.047 in (4)
  • 0.049 in (4)
  • 0.06 in (4)
  • 0.062 in (2)
  • 0.063 in (7)
  • 0.069 in (4)
  • 0.078 in (2)
  • 0.079 in (5)
  • 0.089 in (5)
  • 0.095 in (5)
  • 0.098 in (3)
  • 0.125 in (3)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (2)
  • 0.076 mm (7)
  • 0.1 mm (4)
  • 0.125 mm (2)
  • 0.151 mm (5)
  • 0.176 mm (6)
  • 0.2 mm (7)
  • 0.225 mm (2)
  • 0.25 mm (6)
  • 0.275 mm (2)
  • 0.301 mm (2)
  • 0.325 mm (5)
  • 0.351 mm (5)
  • 0.4 mm (3)
  • 0.426 mm (2)
  • 0.45 mm (5)
  • 0.476 mm (1)
  • 0.5 mm (4)
  • 0.576 mm (5)
  • 0.75 mm (2)
  • 0.775 mm (4)
  • 0.826 mm (1)
  • 0.9 mm (5)
  • 1.0 mm (4)
  • 1.201 mm (4)
  • 1.25 mm (4)
  • 1.5 mm (4)
  • 1.576 mm (2)
  • 1.6 mm (7)
  • 1.75 mm (4)
  • 1.975 mm (2)
  • 2.0 mm (5)
  • 2.25 mm (5)
  • 2.401 mm (5)
  • 2.5 mm (3)
  • 3.176 mm (3)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (2)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (2)
Corner Chamfer Min to Corner Chamfer Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K2885 (4)
  • K313 (7)
  • K420 (8)
  • K4H (3)
  • K68 (8)
  • KB1345 (5)
  • KB1630 (5)
  • KB5625 (2)
  • KBH20 (1)
  • KC250 (4)
  • KC5010 (8)
  • KC5025 (8)
  • KC5410 (7)
  • KC710 (7)
  • KC720 (7)
  • KC722 (7)
  • KC730 (8)
  • KC732 (2)
  • KC810 (8)
  • KC850 (8)
  • KC910 (3)
  • KC9110 (7)
  • KC9120 (2)
  • KC9320 (7)
  • KC935 (7)
  • KC950 (7)
  • KCK20 (6)
  • KCK20B (7)
  • KCP10B (7)
  • KCP25B (7)
  • KCU10 (8)
  • KCU25 (8)
  • KD050 (1)
  • KD081 (2)
  • KD100 (4)
  • KD120 (5)
  • KD1425 (2)
  • KT175 (4)
  • KT315 (7)
  • KU10T (7)
  • KU25T (7)
  • KU30T (7)
  • KY3000 (5)
Hand Of Tool
Hand Of Tool
  • L (2)
  • R (4)
Wiper Insert
Wiper Insert
  • N (6)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 50.0 mm (2)
  • 76.2 mm (3)
  • 82.551 mm (3)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 1.969 in (2)
  • 3.0 in (3)
  • 3.25 in (3)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (7)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (7)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • S (6)
Rake Angle Style
Rake Angle Style
  • NEUTRAL (ZERO) (6)
Maximum Bore Depth
Maximum Bore Depth
  • 9.0 in (1)
  • 10.0 in (5)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 228.601 mm (1)
  • 254.0 mm (5)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (6)
Front-End
Cutting Width
Cutting Width
  • 0.02 in (2)
  • 0.031 in (2)
  • 0.035 in (2)
  • 0.039 in (4)
  • 0.041 in (2)
  • 0.047 in (4)
  • 0.055 in (2)
  • 0.058 in (2)
  • 0.06 in (4)
  • 0.061 in (1)
  • 0.062 in (4)
  • 0.067 in (2)
  • 0.069 in (4)
  • 0.073 in (2)
  • 0.077 in (2)
  • 0.078 in (2)
  • 0.079 in (4)
  • 0.088 in (4)
  • 0.089 in (4)
  • 0.095 in (4)
  • 0.097 in (2)
  • 0.098 in (4)
  • 0.105 in (2)
  • 0.108 in (4)
  • 0.11 in (2)
  • 0.119 in (7)
  • 0.122 in (2)
  • 0.125 in (7)
  • 0.126 in (7)
  • 0.128 in (4)
  • 0.129 in (2)
  • 0.131 in (1)
  • 0.138 in (7)
  • 0.143 in (2)
  • 0.147 in (1)
  • 0.15 in (2)
  • 0.152 in (2)
  • 0.156 in (2)
  • 0.157 in (5)
  • 0.167 in (5)
  • 0.169 in (2)
  • 0.177 in (5)
  • 0.178 in (2)
  • 0.181 in (1)
  • 0.185 in (3)
  • 0.188 in (5)
  • 0.189 in (5)
  • 0.192 in (1)
  • 0.193 in (1)
  • 0.195 in (2)
  • 0.197 in (3)
  • 0.202 in (3)
  • 0.213 in (3)
  • 0.217 in (3)
  • 0.218 in (1)
  • 0.219 in (3)
  • 0.237 in (3)
  • 0.25 in (4)
  • 0.255 in (3)
  • 0.281 in (1)
  • 0.312 in (1)
  • 0.375 in (1)
  • 0.383 in (1)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 0.5 mm (2)
  • 0.775 mm (2)
  • 0.8 mm (2)
  • 0.9 mm (2)
  • 1.0 mm (4)
  • 1.05 mm (2)
  • 1.201 mm (4)
  • 1.401 mm (2)
  • 1.475 mm (2)
  • 1.5 mm (4)
  • 1.55 mm (1)
  • 1.576 mm (4)
  • 1.701 mm (2)
  • 1.75 mm (4)
  • 1.826 mm (2)
  • 1.951 mm (2)
  • 1.975 mm (2)
  • 2.0 mm (4)
  • 2.2 mm (4)
  • 2.225 mm (4)
  • 2.25 mm (4)
  • 2.401 mm (4)
  • 2.475 mm (2)
  • 2.5 mm (4)
  • 2.676 mm (2)
  • 2.75 mm (4)
  • 2.801 mm (2)
  • 3.0 mm (7)
  • 3.1 mm (2)
  • 3.176 mm (7)
  • 3.2 mm (7)
  • 3.25 mm (4)
  • 3.276 mm (2)
  • 3.325 mm (1)
  • 3.5 mm (7)
  • 3.6 mm (2)
  • 3.725 mm (1)
  • 3.801 mm (2)
  • 3.85 mm (2)
  • 3.95 mm (2)
  • 3.975 mm (1)
  • 4.0 mm (5)
  • 4.25 mm (5)
  • 4.3 mm (2)
  • 4.5 mm (5)
  • 4.525 mm (2)
  • 4.601 mm (1)
  • 4.7 mm (3)
  • 4.775 mm (5)
  • 4.801 mm (5)
  • 4.875 mm (1)
  • 4.9 mm (1)
  • 4.95 mm (2)
  • 5.0 mm (3)
  • 5.125 mm (3)
  • 5.4 mm (3)
  • 5.5 mm (3)
  • 5.525 mm (1)
  • 5.575 mm (3)
  • 6.0 mm (3)
  • 6.351 mm (4)
  • 6.476 mm (3)
  • 7.125 mm (1)
  • 7.926 mm (1)
  • 9.525 mm (1)
  • 9.726 mm (1)
Cutting Width Min to Cutting Width Max
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • B H (5)
  • B L (2)
  • C N (5)
  • D P (4)
  • H T (7)
  • H W (8)
Back-End
Connection Type
Connection Type
  • BORING BAR HEAD (6)
Back-End Diameter
Back-End Diameter
  • 57.151 mm (1)
  • 63.5 mm (5)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 2.25 in (1)
  • 2.5 in (5)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Threading

Top Notch™ Threading Cartridges
(2 Products)
  • I.D. Internal ThreadingI.D. Internal Threading
  • I.D. TurningI.D. Turning
  • I.D. Chamfering & ProfilingI.D. Chamfering & Profiling
  • I.D. GroovingI.D. Grooving
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length Gage Insert
1098624 NEL12CA2 NEL12CA2 50.0000 1.968 20.0000 .7874 55.0000 2.165 N.2R
    List price:
    $129.87 /each.
    Your price::
    Qty
    1098380 NER12CA2 NER12CA2 50.0000 1.968 20.0000 .7874 55.6700 2.191 N.2L
      List price:
      $129.87 /each.
      Your price::
      Qty
      List price:
      Discount: %
      Your price::
      Replacement This item is no longer available
      Replacement Product Please contact customer service for assistance
      Qty

      Sold in pkg. of

      ORIGINAL PRODUCT

      Threading

      Top Notch™ Threading Boring Heads
      (6 Products)
      • I.D. Internal ThreadingI.D. Internal Threading
      • I.D. TurningI.D. Turning
      • I.D. Chamfering & ProfilingI.D. Chamfering & Profiling
      • I.D. GroovingI.D. Grooving
      View Products
      SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length Gage Insert Clamp Screw ID Drive Size
      1095516 H36NER4W H36NER4W 76.2000 3.000 57.15 2.25 38.1000 1.500 41.2750 1.625 N.4L 25 IP
        List price:
        $374.89 /each.
        Your price::
        Qty
        1095534 H40NEL3W H40NEL3W 76.2000 3.000 63.5 2.5 38.1000 1.500 41.2750 1.625 N.3R 25 IP
          List price:
          $386.12 /each.
          Your price::
          Qty
          1095536 H40NEL4W H40NEL4W 82.5500 3.250 63.5 2.5 41.2750 1.625 41.2750 1.625 N.4R 25 IP
            List price:
            $386.12 /each.
            Your price::
            Qty
            1095533 H40NER3W H40NER3W 76.2000 3.000 63.5 2.5 38.1000 1.500 41.2750 1.625 N.3L 25 IP
              List price:
              $386.12 /each.
              Your price::
              Qty
              1095535 H40NER4W H40NER4W 82.5500 3.250 63.5 2.5 41.2750 1.625 41.2750 1.625 N.4L 25 IP
                List price:
                $386.12 /each.
                Your price::
                Qty
                1095571 H40NER6W H40NER6W 82.5500 3.250 63.5 2.5 41.2750 1.625 41.2750 1.625 N.6L 5/32
                  List price:
                  $386.12 /each.
                  Your price::
                  Qty
                  List price:
                  Discount: %
                  Your price::
                  Replacement This item is no longer available
                  Replacement Product Please contact customer service for assistance
                  Qty

                  Sold in pkg. of

                  product-image
                  Please adjust the following properties from

                  ISO Catalog Number

                  ANSI Catalog Number

                  to find similar products.
                  You are about to create a duplicate . Do you want to proceed?
                  You are about to delete Do you want to proceed?
                  What would you like to rename your to?
                  Please enter a valid name
                  Please enter a name for the duplicate
                  Please enter a valid name
                  You are about to add to your My Solutions page. Do you want to proceed?
                  Please enter a valid name
                  Send a copy of

                  Please enter a valid Email
                  Please enter a valid name

                  The following CAD files are available

                  Please select a file to download

                  You should be logged to see your dashboard information
                  Session expired due to inactivity, please login again
                  The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                  item(s) successfully added to the cart
                  View Cart