Drilling
Drilling: Stacked Plates
Counter Sinking/ Stroke Chamfering
Tool Dimensions: 2flute/2margin/coolantDownloaded file will be available after import in the {{cadTool}} tool library.
| Material Number | 6773231 |
| ISO Catalog ID | KTFST06350DALM |
| ANSI Catalog ID | KTFST02500DAL |
| Grade | KN15 |
| [D1] Drill Diameter | 6.35 mm |
| [D1] Drill Diameter | 0.25 in |
| [L5] Drill Point Length | 1.12 mm |
| [L5] Drill Point Length | 0.0441 in |
| [SSC] Insert Seat Size | B |
DrillingDrilling: Stacked PlatesCounter Sinking/ Stroke ChamferingTool Dimensions: 2flute/2margin/coolantGrades
KN15
Composition: Uncoated, highly wear-resistant fine-grain carbide.
Application: Highly polished chip flute surfaces ensure superior chip evacuation and reduce tendency for built-up edges. First choice for non-ferrous materials.
Create Solution to calculate Feeds and Speeds
After creating a solution just choose the Feeds & Speeds icon and our system will provide recommendations. You can customize the information by adding your machine and specifications or make adjustments using the sliders.
| Material | Cutting Speed | Metric | |||||||||
| Range | Recommended Feed Rate per Rev | ||||||||||
| Min | Starting Value | Max | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| S | 4 | 10 | 13 | 20 | mm/r | 0,02–0,08 | 0,03–0,10 | 0,04–0,12 | 0,05–0,16 | 0,05–0,18 | 0,06–0,20 |
| N | 1 | 100 | 230 | 270 | mm/r | 0,13–0,22 | 0,16–0,24 | 0,20–0,28 | 0,24–0,32 | 0,28–0,40 | 0,32–0,48 |
| 2 | 100 | 220 | 270 | mm/r | 0,14–0,23 | 0,16–0,28 | 0,20–0,32 | 0,24–0,36 | 0,28–0,40 | 0,32–0,52 | |
| 3 | 90 | 180 | 230 | mm/r | 0,13–0,22 | 0,16–0,24 | 0,20–0,28 | 0,24–0,32 | 0,28–0,40 | 0,32–0,48 | |
| 4 | 90 | 130 | 200 | mm/r | 0,10–0,18 | 0,16–0,28 | 0,20–0,32 | 0,24–0,36 | 0,28–0,40 | 0,32–0,52 | |
| C | 2 | 70 | 110 | 140 | mm/r | 0,03-0,10 | 0,04-0,12 | 0,05-0,15 | 0,05-0,18 | 0,06-0,21 | 0,07-0,23 |
| 3 | 10 | 13 | 20 | mm/r | 0,02-0,08 | 0,03-0,10 | 0,04-0,12 | 0,05-0,16 | 0,05-0,18 | 0,06-0,20 | |
| 4 | 10 | 20 | 40 | mm/r | 0,02-0,08 | 0,03-0,10 | 0,04-0,12 | 0,05-0,16 | 0,05-0,18 | 0,06-0,20 | |
| Material | Cutting Speed | Metric | |||||||||
| Range | Recommended Feed Rate per Rev | ||||||||||
| Min | Starting Value | Max | 6.0 | 8.0 | 10.0 | 12.0 | 16.0 | 20.0 | |||
| S | 4 | 10 | 13 | 20 | mm/r | 0.03～0.10 | 0.04～0.12 | 0.05～0.15 | 0.05～0.18 | 0.06～0.21 | 0.07～0.23 |
| N | 1 | 100 | 230 | 270 | mm/r | 0.13～0.22 | 0.16～0.24 | 0.20～0.28 | 0.24～0.32 | 0.28～0.40 | 0.32～0.48 |
| 2 | 100 | 220 | 270 | mm/r | 0.14～0.23 | 0.16～0.28 | 0.20～0.32 | 0.24～0.36 | 0.28～0.40 | 0.32～0.52 | |
| 3 | 90 | 180 | 230 | mm/r | 0.13～0.22 | 0.16～0.24 | 0.20～0.28 | 0.24～0.32 | 0.28～0.40 | 0.32～0.44 | |
| 4 | 90 | 130 | 200 | mm/r | 0.10～0.18 | 0.16～0.28 | 0.20～0.32 | 0.24～0.36 | 0.28～0.40 | 0.32～0.48 | |
| C | 2 | 70 | 110 | 140 | mm/r | 0.03～0.10 | 0.04～0.12 | 0.05～0.15 | 0.05～0.18 | 0.06～0.21 | 0.07～0.23 |
| 3 | 10 | 13 | 20 | mm/r | 0.03～0.10 | 0.04～0.12 | 0.05～0.15 | 0.05～0.18 | 0.06～0.21 | 0.07～0.23 | |
| 4 | 10 | 20 | 40 | mm/r | 0.03～0.10 | 0.04～0.12 | 0.05～0.15 | 0.05～0.18 | 0.06～0.21 | 0.07～0.23 | |
| Material | Cutting Speed | Inch | |||||||||
| Range | Recommended Feed Rate per Rev | ||||||||||
| Min | Starting Value | Max | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | |||
| S | 4 | 30 | 40 | 70 | IPR | .001–.003 | .001–.004 | .002–.005 | .002–.006 | .002–.007 | .002–.008 |
| N | 1 | 330 | 750 | 890 | IPR | .005–.009 | .006–.009 | .008–.011 | .009–.013 | .011–.016 | .013–.019 |
| 2 | 330 | 720 | 890 | IPR | .006–.009 | .006–.011 | .008–.013 | .009–.014 | .011–.017 | .013–.021 | |
| 3 | 300 | 590 | 750 | IPR | .005–.009 | .006–.009 | .008–.011 | .009–.013 | .011–.016 | .013–.019 | |
| 4 | 300 | 430 | 660 | IPR | .004–.007 | .006–.011 | .008–.013 | .009–.014 | .011–.016 | .013–.019 | |
| C | 4 | 230 | 360 | 460 | IPR | .001-.004 | .002-.005 | .002-.006 | .002-.007 | .002-.008 | .003-.009 |
| 4 | 30 | 40 | 70 | IPR | .001-.003 | .001-.004 | .002-.005 | .002-.006 | .002-.007 | .002-.008 | |
| 4 | 30 | 70 | 130 | IPR | .001-.003 | .001-.004 | .002-.005 | .002-.006 | .002-.007 | .002-.008 | |
| Material | Cutting Speed | Inch | |||||||||
| Range | Recommended Feed Rate per Rev | ||||||||||
| Min | Starting Value | Max | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | |||
| S | 4 | 30 | 40 | 70 | IPR | .001–.004 | .002–.005 | .002–.006 | .002–.007 | .002–.008 | .003–.009 |
| N | 1 | 330 | 750 | 890 | IPR | .005–.009 | .006–.009 | .008–.011 | .009–.013 | .011–.016 | .013–.019 |
| 2 | 330 | 720 | 890 | IPR | .006–.009 | .006–.011 | .008–.013 | .009–.014 | .011–.017 | .013–.021 | |
| 3 | 300 | 590 | 750 | IPR | .005–.009 | .006–.009 | .008–.011 | .009–.013 | .011–.016 | .013–.017 | |
| 4 | 300 | 430 | 660 | IPR | .004–.007 | .006–.011 | .008–.013 | .009–.014 | .011–.016 | .013–.019 | |
| C | 4 | 230 | 360 | 460 | IPR | .001-.004 | .002-.005 | .002-.006 | .002-.007 | .002-.008 | .003-.009 |
| 4 | 30 | 40 | 70 | IPR | .001-.004 | .002-.005 | .002-.006 | .002-.007 | .002-.008 | .003-.009 | |
| 4 | 30 | 70 | 130 | IPR | .001-.004 | .002-.005 | .002-.006 | .002-.007 | .002-.008 | .003-.009 | |
| Tolerance • Metric | |
| D1 metric | tolerance n8 |
| 6 | +0,008/ +0,026 |
| +0,010/ +0,032 | |
| +0,012/ +0,039 | |
| +0,015/ +0,048 | |
| Tolerance • Inch | |
| D1 inch | tolerance n8 |
| 0.2362 | +0.00031/ +0.00102 |
| +0.00039/ +0.00126 | |
| +0.00047/ +0.00154 | |
| +0.00059/ +0.00189 | |
I have read and accepted the Terms & Conditions of use
ISO Catalog Number
ANSI Catalog Number
to find similar products.Please select a file to download
Models
Product data
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?