List price:

Discount: %

List price:

$22.60 /each

Your price:

Qty

Inserts for Mill 1-14™ • EDPT-S.GE

Name: Inserts for Mill 1-14™ • EDPT-S.GE
SKU: 3855180

Indexable Inserts

Metric

Inch

SAP Material Number	3855180
ISO Catalog Number	EDPT140431PDSRGE
ANSI Catalog Number	EP1431SGE
Grade	KC725M
[LI] Insert Length	17.4600 mm
[LI] Insert Length	.6870 in
[S] Insert Thickness	4.4480 mm
[S] Insert Thickness	.1751 in
[W] Insert Width	8.0700 mm
[W] Insert Width	.3180 in
[BS] Corner Facet Length	0.1300 mm
[BS] Corner Facet Length	.0050 in
[Rε] Corner Radius	3.1000 mm
[Rε] Corner Radius	.1220 in
Average Chip Thickness [HM]	0.1370 mm
Average Chip Thickness [HM]	.0054 in
Cutting Edges per Insert	2

See all Product Variants

Workpiece Materials

P Steel

M Stainless Steel

S High-Temp Alloys

Features and benefits

Medium roughing and semi-finishing.

Solution for austenitic stainless steel and super alloys.

Medium feed rates.

PSTS — Precision Pressed and Sintered to Size.

Ap1 max = 14mm.

Machine Side

Workpiece Side

Grades

KC725M

Coated carbide grade with an advanced PVD TiAlN coating. KC725M is a high-performance grade for milling steel, stainless steel, and ductile cast iron. The good thermal shock resistance of the substrate makes this grade ideal for both wet and dry machining. Primarily for use in general and heavy machining.

P Steel

S High-Temp Alloys

M Stainless Steel

Insert Selection Guide

Werkstoffgruppe	Leichte Bearbeitung		Allgemeine Anwendung		Schruppbearbeitung
–	(Leicht schneidende Geometrie)		–		(Stabile Geometrie)
–	Verschleiß- festigkeit		<="" td="">		Zähigkeit
–	Geometrie	Sorte	Geometrie	Sorte	Geometrie	Sorte
P1–P2	.E..GD	KCPM40	.S..GD2	KCPM40	.E..HD2	KCPM40
P3–P4	.E..GD	KCPM40	.S..GD2	KCPK30	.E..HD2	KCPK30
P5–P6	.E..GD	KC725M	.S..GD2	KC725M	.E..HD2	KC725M
M1–M2	.E..LD	KC522M	.E..GD	KCSM40	.E..HD2	KC522M
M3	.E..GD	KCSM40	.S..GD2	KCPM40	.E..HD2	KCPM40
K1–K2	.S..GD2	KC520M	.E..HD2	KC520M	.E..HD2	KCK15
K3	.S..GD2	KC520M	.E..HD2	KC520M	.E..HD2	KCK15
N1–N2	.F..LDJ	KC410M	.F..LDJ	KC410M	.E..LDJ	KC422M
N3	.F..LDJ	KC410M	.F..LDJ	KC410M	.F..LDJ	KC410M
S1–S2	.E..GD	KC725M	.S..GD2	KC725M	.E..HD2	KC725M
S3	.E..GD	KCSM40	.S..GD2	KC725M	.E..HD2	KC725M
S4	.E..GD	KCSM40	.S..GD2	KC725M	.E..HD2	KC522M
H1	–	–	–	–	–	–

Insert Selection Guide

Werkstoffgruppe	Leichte Bearbeitung		Allgemeine Anwendung		Schruppbearbeitung
–	(Leicht schneidende Geometrie)				(Stabile Geometrie)
–	Verschleiß- festigkeit		<="" td="">		Zähigkeit
–	Geometrie	Sorte	Geometrie	Sorte	Geometrie	Sorte
P1–P2	.E..GD	KCPM40	.S..GD2	KCPM40	.E..HD2	KCPM40
P3–P4	.E..GD	KCPM40	.S..GD2	KCPK30	.E..HD2	KCPK30
P5–P6	.E..GD	KC725M	.S..GD2	KC725M	.E..HD2	KC725M
M1–M2	.E..LD	KC522M	.E..GD	KCSM40	.E..HD2	KC522M
M3	.E..GD	KCSM40	.S..GD2	KCPM40	.E..HD2	KCPM40
K1–K2	.S..GD2	KC520M	.E..HD2	KC520M	.E..HD2	KCK15
K3	.S..GD2	KC520M	.E..HD2	KC520M	.E..HD2	KCK15
N1–N2	.F..LDJ	KC410M	.F..LDJ	KC410M	.E..LDJ	KC422M
N3	.F..LDJ	KC410M	.F..LDJ	KC410M	.F..LDJ	KC410M
S1–S2	.E..GD	KC725M	.S..GD2	KC725M	.E..HD2	KC725M
S3	.E..GD	KCSM40	.S..GD2	KC725M	.E..HD2	KC725M
S4	.E..GD	KCSM40	.S..GD2	KC725M	.E..HD2	KC522M
H1	–	–	–	–	–	–

Recommended Starting Feeds [mm]

Schneidkörper- Geometrie	Empfohlener Start-Vorschub pro Zahn (fz) im Verhältnis zur radialen Schnitttiefe (ae) in %															Schneidkörper- Geometrie
	5%			10%			20%			30%			40–100%
.F..LDJ	0,12	0,46	0,82	0,08	0,33	0,59	0,06	0,25	0,44	0,06	0,22	0,38	0,05	0,20	0,35	.F..LDJ
.E..LDJ	0,12	0,47	0,82	0,08	0,34	0,59	0,06	0,26	0,44	0,06	0,22	0,39	0,05	0,20	0,35	.E..LDJ
.E..LD	0,12	0,46	0,81	0,09	0,33	0,58	0,07	0,25	0,43	0,06	0,22	0,38	0,05	0,20	0,35	.E..LD
.E..GD	0,17	0,52	0,89	0,12	0,38	0,64	0,09	0,28	0,48	0,08	0,24	0,42	0,07	0,22	0,38	.E..GD
.S..GE	0,23	0,51	0,89	0,17	0,37	0,64	0,13	0,27	0,48	0,11	0,24	0,42	0,10	0,22	0,38	.S..GE
.S..GD	0,23	0,50	0,88	0,17	0,36	0,63	0,13	0,27	0,47	0,11	0,24	0,41	0,10	0,22	0,38	.S..GD
.S..GD2	0,23	0,50	0,88	0,17	0,36	0,63	0,13	0,27	0,47	0,11	0,24	0,41	0,10	0,22	0,38	.S..GD2
.E..HD	0,23	0,59	0,95	0,17	0,43	0,68	0,13	0,32	0,51	0,11	0,28	0,44	0,10	0,25	0,41	.E..HD
.E..HD2	0,21	0,59	0,95	0,15	0,43	0,68	0,11	0,32	0,51	0,10	0,28	0,44	0,09	0,25	0,41	.E..HD2

Leichte Bearbeitung

Allgemeine Anwendung

Schruppbearbeitung

Recommended Starting Feeds [mm]

Schneidkörper- Geometrie	Empfohlener Start-Vorschub pro Zahn (fz) im Verhältnis zur radialen Schnitttiefe (ae) in %															Schneidkörper- Geometrie
	5%			10%			20%			30%			40–100%
.F..LDJ	0,12	0,46	0,82	0,08	0,33	0,59	0,06	0,25	0,44	0,06	0,22	0,38	0,05	0,20	0,35	.F..LDJ
.E..LDJ	0,12	0,47	0,82	0,08	0,34	0,59	0,06	0,26	0,44	0,06	0,22	0,39	0,05	0,20	0,35	.E..LDJ
.E..LD	0,12	0,46	0,81	0,09	0,33	0,58	0,07	0,25	0,43	0,06	0,22	0,38	0,05	0,20	0,35	.E..LD
.E..GD	0,17	0,52	0,89	0,12	0,38	0,64	0,09	0,28	0,48	0,08	0,24	0,42	0,07	0,22	0,38	.E..GD
.S..GE	0,23	0,51	0,89	0,17	0,37	0,64	0,13	0,27	0,48	0,11	0,24	0,42	0,10	0,22	0,38	.S..GE
.S..GD	0,23	0,50	0,88	0,17	0,36	0,63	0,13	0,27	0,47	0,11	0,24	0,41	0,10	0,22	0,38	.S..GD
.S..GD2	0,23	0,50	0,88	0,17	0,36	0,63	0,13	0,27	0,47	0,11	0,24	0,41	0,10	0,22	0,38	.S..GD2
.E..HD	0,23	0,59	0,95	0,17	0,43	0,68	0,13	0,32	0,51	0,11	0,28	0,44	0,10	0,25	0,41	.E..HD
.E..HD2	0,21	0,59	0,95	0,15	0,43	0,68	0,11	0,32	0,51	0,10	0,28	0,44	0,09	0,25	0,41	.E..HD2

Leichte Bearbeitung

Allgemeine Anwendung

Schruppbearbeitung

Recommended Starting Feeds [IPT]

Schneidkörper- Geometrie	Empfohlener Start-Vorschub pro Zahn (fz) im Verhältnis zur radialen Schnitttiefe (ae) in %															Schneidkörper- Geometrie
	5%			10%			20%			30%			40–100%
.F..LDJ	.005	.019	.033	.003	.013	.023	.003	.010	.018	.002	.009	.015	.002	.008	.014	.F..LDJ
.E..LDJ	.005	.019	.033	.003	.014	.024	.003	.010	.018	.002	.009	.015	.002	.008	.014	.E..LDJ
.E..LD	.005	.018	.032	.004	.013	.023	.003	.010	.017	.002	.009	.015	.002	.008	.014	.E..LD
.E..GD	.007	.020	.035	.005	.015	.025	.004	.011	.019	.003	.010	.016	.003	.009	.015	.E..GD
.S..GE	.009	.020	.035	.007	.014	.025	.005	.011	.019	.004	.009	.017	.004	.009	.015	.S..GE
.S..GD	.009	.020	.035	.007	.014	.025	.005	.011	.019	.004	.009	.016	.004	.009	.015	.S..GD
.S..GD2	.009	.020	.035	.007	.014	.025	.005	.011	.019	.004	.009	.016	.004	.009	.015	.S..GD2
.E..HD	.009	.023	.037	.007	.017	.027	.005	.013	.020	.004	.011	.017	.004	.010	.016	.E..HD
.E..HD2	.008	.023	.037	.006	.017	.027	.004	.013	.020	.004	.011	.017	.004	.010	.016	.E..HD2

Leichte Bearbeitung

Allgemeine Anwendung

Schruppbearbeitung

Recommended Starting Speeds [m/min]

Werkstoffgruppe		KC410M			KC422M			KC520M			KC522M			KC725M			KCK15			KCPM20			KCPK30
P	1	–	–	–	–	–	–	–	–	–	330	285	270	260	230	215	–	–	–	550	485	450	455	395	370
	2	–	–	–	–	–	–	–	–	–	275	240	200	220	190	160	–	–	–	340	310	275	280	255	230
	3	–	–	–	–	–	–	–	–	–	255	215	175	200	170	140	–	–	–	310	275	255	255	230	205
	4	–	–	–	–	–	–	–	–	–	225	185	150	180	150	120	–	–	–	230	215	190	190	175	160
	5	–	–	–	–	–	–	–	–	–	185	170	150	150	135	120	–	–	–	275	250	230	260	230	210
	6	–	–	–	–	–	–	–	–	–	165	125	100	130	100	80	–	–	–	190	170	145	160	135	–
M	1	–	–	–	–	–	–	–	–	–	205	180	165	170	150	135	–	–	–	225	200	175	205	185	155
	2	–	–	–	–	–	–	–	–	–	185	160	130	155	130	110	–	–	–	205	175	160	185	160	140
	3	–	–	–	–	–	–	–	–	–	140	120	95	115	100	80	–	–	–	160	145	125	145	130	115
K	1	–	–	–	–	–	–	270	245	215	230	205	185	–	–	–	420	385	340	360	325	295	295	265	240
	2	–	–	–	–	–	–	210	190	175	180	160	150	–	–	–	335	295	275	285	255	235	235	210	190
	3	–	–	–	–	–	–	175	160	145	150	135	120	–	–	–	280	250	230	240	215	200	195	175	160
N	1–2	1215	1080	995	1075	945	875	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	1080	995	915	945	875	760	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	–	–	–	40	35	25	35	30	25	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	40	35	25	35	30	25	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	50	40	25	45	35	25	–	–	–	–	–	–	–	–	–
	4	–	–	–	–	–	–	–	–	–	70	50	35	60	45	30	–	–	–	–	–	–	–	–	–
H	1	–	–	–	–	–	–	–	–	–	120	90	70	–	–	–	–	–	–	140	115	95	–	–	–

Recommended Starting Speeds [m/min]

Werkstoffgruppe		KC410M			KC422M			KC520M			KC522M			KC725M			KCK15			KCPM20			KCPK30
P	1	–	–	–	–	–	–	–	–	–	330	285	270	260	230	215	–	–	–	550	485	450	455	395	370
	2	–	–	–	–	–	–	–	–	–	275	240	200	220	190	160	–	–	–	340	310	275	280	255	230
	3	–	–	–	–	–	–	–	–	–	255	215	175	200	170	140	–	–	–	310	275	255	255	230	205
	4	–	–	–	–	–	–	–	–	–	225	185	150	180	150	120	–	–	–	230	215	190	190	175	160
	5	–	–	–	–	–	–	–	–	–	185	170	150	150	135	120	–	–	–	275	250	230	260	230	210
	6	–	–	–	–	–	–	–	–	–	165	125	100	130	100	80	–	–	–	190	170	145	160	135	–
M	1	–	–	–	–	–	–	–	–	–	205	180	165	170	150	135	–	–	–	225	200	175	205	185	155
	2	–	–	–	–	–	–	–	–	–	185	160	130	155	130	110	–	–	–	205	175	160	185	160	140
	3	–	–	–	–	–	–	–	–	–	140	120	95	115	100	80	–	–	–	160	145	125	145	130	115
K	1	–	–	–	–	–	–	270	245	215	230	205	185	–	–	–	420	385	340	360	325	295	295	265	240
	2	–	–	–	–	–	–	210	190	175	180	160	150	–	–	–	335	295	275	285	255	235	235	210	190
	3	–	–	–	–	–	–	175	160	145	150	135	120	–	–	–	280	250	230	240	215	200	195	175	160
N	1–2	1215	1080	995	1075	945	875	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	1080	995	915	945	875	760	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	–	–	–	40	35	25	35	30	25	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	40	35	25	35	30	25	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	50	40	25	45	35	25	–	–	–	–	–	–	–	–	–
	4	–	–	–	–	–	–	–	–	–	70	50	35	60	45	30	–	–	–	–	–	–	–	–	–
H	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–

Recommended Starting Speeds [SFM]

Werkstoffgruppe		KC410M			KC422M			KC520M			KC522M			KC725M			KCK15			KCPM20			KCPK30
P	1	–	–	–	–	–	–	–	–	–	1080	940	880	860	750	700	–	–	–	1810	1590	1470	1485	1300	1210
	2	–	–	–	–	–	–	–	–	–	900	790	660	720	630	530	–	–	–	1120	1010	910	920	830	750
	3	–	–	–	–	–	–	–	–	–	830	700	580	660	560	460	–	–	–	1010	910	830	830	750	680
	4	–	–	–	–	–	–	–	–	–	740	610	490	590	490	390	–	–	–	760	700	630	620	575	520
	5	–	–	–	–	–	–	–	–	–	610	550	490	490	440	390	–	–	–	910	820	750	850	760	690
	6	–	–	–	–	–	–	–	–	–	540	410	330	430	330	260	–	–	–	630	550	475	520	450	–
M	1	–	–	–	–	–	–	–	–	–	670	590	540	560	490	450	–	–	–	730	655	570	680	600	515
	2	–	–	–	–	–	–	–	–	–	610	520	430	510	430	360	–	–	–	670	580	520	610	530	460
	3	–	–	–	–	–	–	–	–	–	460	400	310	380	330	260	–	–	–	530	475	410	475	430	380
K	1	–	–	–	–	–	–	880	800	710	750	680	600	–	–	–	1380	1255	1115	1180	1070	960	965	875	780
	2	–	–	–	–	–	–	690	620	580	590	530	490	–	–	–	1095	975	910	940	840	770	770	690	630
	3	–	–	–	–	–	–	580	520	470	490	440	400	–	–	–	920	815	750	790	700	650	645	575	530
N	1–2	3990	3550	3270	3520	3100	2870	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	3580	3270	3000	3100	2870	2500	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	–	–	–	130	120	90	115	100	80	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	130	120	90	115	100	80	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	170	130	90	150	115	80	–	–	–	–	–	–	–	–	–
	4	–	–	–	–	–	–	–	–	–	230	170	120	200	150	100	–	–	–	–	–	–	–	–	–
H	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–

Application Examples

Wendeschneidplatten-Ausführung	Nenn- durch- messer	Max. Tauchwinkel	DH min (min Bohrungsdurchmesser)	DHI min (max. Flachbohrungs-Durchmesser)	max. Durchmesser
Mill 1-14	20	16˚	23,74	35,62	40
Mill 1-14	25	11˚	33,75	44,44	50
Mill 1-14	32	7˚	47,80	59,79	64
Mill 1-14	40	5˚	63,76	75,22	80
Mill 1-14	40	5˚	64,00	75,47	80
Mill 1-14	50	4˚	83,96	96,05	100
Mill 1-14	63	3˚	109,93	121,47	126
Mill 1-14	80	2˚	143,91	155,47	160
Mill 1-14	100	1˚	183,89	199,47	200
Mill 1-14	125	1˚	233,88	245,47	250
Mill 1-14	160	1˚	303,88	315,47	320

Application Examples


Wendeschneidplatten-Ausführung	Nenn- durch- messer	Max. Tauchwinkel	min. Bohrungs- durchmesser (DH min)	max. Flachbohrungs- durchmesser (DH1 max)	max. Durchmesser
Mill 1-14™	32	5,4˚	47,80	59,79	64
Mill 1-14™	40	3,8˚	64,00	75,47	80
Mill 1-14™	50	2,7˚	83,96	96,05	100
Mill 1-14™	63	1,9˚	109,93	121,47	126

Application Examples

Wendeschneidplatten-Ausführung	Nenn- durch- messer	Max. Tauchwinkel	DH min (min Bohrungsdurchmesser)	DHI min (max. Flachbohrungs-Durchmesser)	max. Bohrungsdurchmesser (keine Flachbohrung)
Mill 1-14	1.25	5.4˚	1.862	2.312	2.5
Mill 1-14	1.50	4.0˚	2.370	2.822	3
Mill 1-14	2.00	2.6˚	3.368	3.822	4
Mill 1-14	2.50	1.9˚	4.367	4.822	5

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	ISO Catalog Number	Grade

Product Suggestions

Product Family suggestions

Notifications

Inserts for Mill 1-14™ • EDPT-S.GE

Indexable Inserts

Workpiece Materials

Features and benefits

Machine Side

Workpiece Side

Grades

Insert Selection Guide

Insert Selection Guide

Recommended Starting Feeds [mm]

Recommended Starting Feeds [mm]

Recommended Starting Feeds [IPT]

Recommended Starting Speeds [m/min]

Recommended Starting Speeds [m/min]

Recommended Starting Speeds [SFM]

Application Examples

Application Examples

Application Examples

Product Suggestions

Product Family suggestions

New customer

Registered User

New customer

Registered User

Notifications

Inserts for Mill 1-14™ • EDPT-S.GE

Indexable Inserts

Workpiece Materials

Features and benefits

Machine Side

Workpiece Side

Grades

Insert Selection Guide

Insert Selection Guide

Recommended Starting Feeds [mm]

Recommended Starting Feeds [mm]

Recommended Starting Feeds [IPT]

Recommended Starting Speeds [m/min]

Recommended Starting Speeds [m/min]

Recommended Starting Speeds [SFM]

Application Examples

Application Examples

Application Examples

The following CAD files are available