| SAP Material Number | 1199058 |
| ISO Catalog Number | B105A15000 |
| ANSI Catalog Number | B105A15000 |
| Grade | KC7210 |
| [D1] Drill Diameter M | 15.0000 mm |
| [D1] Drill Diameter M | .5906 in |
| [L] Overall Length | 133.0000 mm |
| [L] Overall Length | 5.236 in |
| [L3] Flute Length | 83.0000 mm |
| [L3] Flute Length | 3.267 in |
| [L4] Maximum Drilling Depth | 63.0000 mm |
| [L4] Maximum Drilling Depth | 2.480 in |
| [L5] Drill Point Length | 3.7470 mm |
| [L5] Drill Point Length | .1475 in |
| [LS] Shank Length | 48.0 mm |
| [LS] Shank Length | 1.889 in |
| [D] Adapter / Shank / Bore Diameter | 16.0 mm |
| [D] Adapter / Shank / Bore Diameter | .6299 in |
Drilling
Drilling: Inclined Exit
Drilling Depth: 5x
Shank - Cylindrical Plain ≤h6
Helix Angle: 30°
Flood Coolant: Drilling
DIN number 6535
DIN number 6537
Tool Dimensions: 3flute/3margin/no cool
Drilling: Cross-Hole Drilling
Composition: PVD TiAlN coated fine-grain carbide with enhanced hot hardness properties.
Application: Best suited for dry machining of cast iron. The enhanced hot hardness properties of the substrate combined with a wear-resistant TiAlN coating offer highest material removal rates using the triple fluted drill design.
| Toleranz • Zoll | ||
| Nenndurchmesserbereich | D1 Toleranz m7 | D Toleranz h6 |
| .1181–.2362 | .0002/.0006 | .0000/-.0003 |
| .2362–.3937 | .0002/.0008 | .0000/-.0004 |
| .3937–.7087 | .0003/.0010 | .0000/-.0004 |
| .7087–1.0000 | .0003/.0011 | .0000/-.0005 |
| Toleranz • Metrisch | ||
| Nenndurchmesserbereich | D1 Toleranz m7 | D Toleranz h6 |
| 3–6 | 0,004/0,016 | 0,000/-0,008 |
| 6–10 | 0,006/0,021 | 0,000/-0,009 |
| 10–18 | 0,007/0,025 | 0,000/-0,011 |
| 18–25,4 | 0,008/0,029 | 0,000/-0,013 |
| Werkstoffgruppe |  <="" td=""> |  <="" td="" /> |
|||||||||||
| Schnittgeschwindigkeit vc | Metrisch | ||||||||||||
| Bereich m/min | Empfohlene Vorschubrate (f) pro Umdrehung | ||||||||||||
| min. | Startwert | max. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| K | 1 | 60 | 85 | 110 | mm/U | 0,11–0,20 | 0,12–0,20 | 0,16–0,28 | 0,20–0,35 | 0,22–0,42 | 0,24–0,50 | 0,28–0,61 | 0,30–0,68 |
| 2 | 70 | 70 | 90 | mm/U | 0,11–0,20 | 0,12–0,20 | 0,16–0,28 | 0,20–0,35 | 0,22–0,42 | 0,24–0,50 | 0,28–0,61 | 0,30–0,68 | |
| 3 | 50 | 50 | 70 | mm/U | 0,09–0,18 | 0,10–0,18 | 0,14–0,26 | 0,18–0,33 | 0,02–0,40 | 0,22–0,48 | 0,26–0,59 | 0,28–0,66 | |
| N | 1 | 100 | 210 | 410 | mm/U | 0,09–0,15 | 0,10–0,20 | 0,18–0,33 | 0,20–0,38 | 0,25–0,43 | 0,03–0,51 | 0,43–0,58 | 0,64–0,79 |
| 2 | 100 | 250 | 250 | mm/U | 0,10–0,19 | 0,12–0,21 | 0,18–0,33 | 0,25–0,42 | 0,30–0,50 | 0,35–0,58 | 0,44–0,74 | 0,52–0,88 | |
| 3 | 100 | 180 | 400 | mm/U | 0,09–0,16 | 0,10–0,20 | 0,12–0,26 | 0,16–0,36 | 0,20–0,40 | 0,24–0,45 | 0,30–0,50 | 0,34–0,60 | |
| 4 | 60 | 170 | 250 | mm/U | 0,08–0,15 | 0,13–0,18 | 0,18–0,33 | 0,20–0,36 | 0,23–0,38 | 0,33–0,46 | 0,38–0,48 | 0,58–0,76 | |
| S | 4 | 20 | 20 | 50 | mm/U | 0,03–0,05 | 0,04–0,07 | 0,07–0,09 | 0,09–0,12 | 0,11–0,15 | 0,13–0,18 | 0,17–0,24 | 0,22–0,30 |
| Werkstoffgruppe | <="" td=""> | <="" td="" /> |
|||||||||||
| Werkstoffgruppe | Schnittgeschwindigkeit vc | Zoll | |||||||||||
| Bereich SFM | Empfohlene Vorschubrate (f) pro Umdrehung | ||||||||||||
| min. | Startwert | max. | 1/8 .125 | 3/16 .188 | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | |||
| K | 1 | 200 | 280 | 360 | IPR | .004–.008 | .005–.008 | .006–.011 | .008–.014 | .009–.017 | .009–.020 | .011–.024 | .012–.027 |
| 2 | 230 | 230 | 300 | IPR | .004–.008 | .005–.008 | .006–.011 | .008–.014 | .009–.017 | .009–.020 | .011–.024 | .012–.027 | |
| 3 | 160 | 160 | 230 | IPR | .004–.007 | .004–.007 | .006–.010 | .007–.013 | .001–.016 | .009–.019 | .010–.023 | .011–.026 | |
| N | 1 | 330 | 690 | 1340 | IPR | .004–.006 | .004–.008 | .007–.013 | .008–.015 | .010–.017 | .001–.020 | .017–.023 | .025–.031 |
| 2 | 330 | 820 | 820 | IPR | .004–.008 | .005–.008 | .007–.013 | .010–.017 | .012–.020 | .014–.023 | .017–.029 | .021–.035 | |
| 3 | 330 | 590 | 1310 | IPR | .004–.006 | .004–.008 | .005–.010 | .006–.014 | .008–.016 | .009–.018 | .012–.020 | .013–.024 | |
| 4 | 200 | 560 | 820 | IPR | .003–.006 | .005–.007 | .007–.013 | .008–.014 | .009–.015 | .013–.018 | .015–.019 | .023–.030 | |
| S | 4 | 70 | 70 | 160 | IPR | .001–.002 | .002–.003 | .003–.004 | .004–.005 | .004–.006 | .005–.007 | .007–.009 | .009–.012 |
| Werkstoffgruppe |  <="" td=""> |  <="" td="" /> |
|||||||||||
| Werkstoffgruppe | Schnittgeschwindigkeit vc | Zoll | |||||||||||
| Bereich SFM | Empfohlene Vorschubrate (f) pro Umdrehung | ||||||||||||
| min. | Startwert | max. | 1/8 .125 | 3/16 .188 | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | |||
| S | 4 | 70 | 100 | 160 | IPR | – | – | .001–.003 | .001–.003 | .001–.003 | .003–.006 | .003–.006 | – |
| Werkstoffgruppe | <="" td=""> | <="" td="" /> |
|||||||||||
| Schnittgeschwindigkeit vc | Metrisch | ||||||||||||
| Bereich m/min | Empfohlene Vorschubrate (f) pro Umdrehung | ||||||||||||
| min. | Startwert | max. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| S | 4 | 20 | 30 | 50 | mm/U | – | – | 0,03–0,08 | 0,03–0,08 | 0,03–0,08 | 0,08–0,15 | 0,08–0,15 | – |
ISO Catalog Number
ANSI Catalog Number
to find similar products.Please select a file to download
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
