Product Similar To:
Mill 1-14™ • Carbide Insert • EDPT-GD • Medium Machining
Shoulder milling insert with two cutting edges per insert
Material Number2982091
ISO Catalog IDEDPT140416PDSRGDANSI Catalog IDEP1416SGD
- P Steel
- M Stainless Steel
- K Cast Iron
- S High-Temp Alloys
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
Material Number | 2982091 |
ISO Catalog ID | EDPT140416PDSRGD |
ANSI Catalog ID | EP1416SGD |
Grade | KCPK30 |
[LI] Insert Length | 17.485 mm |
[LI] Insert Length | .6884 in |
[L10] Insert Cutting Edge Length | 15.289 mm |
[L10] Insert Cutting Edge Length | .6019 in |
[S] Insert Thickness | 4.5 mm |
[S] Insert Thickness | .1772 in |
[W] Insert Width | 8.35 mm |
[W] Insert Width | .3287 in |
[BS] Corner Facet Length | 1.77 mm |
[BS] Corner Facet Length | .07 in |
[Rε] Corner Radius | 1.6 mm |
[Rε] Corner Radius | .0625 in |
Average Chip Thickness [HM] | 0.108 mm |
Average Chip Thickness [HM] | .0043 in |
Cutting Edges per Insert | 2 |
Workpiece Materials
- Steel
- Stainless Steel
- Cast Iron
- High-Temp Alloys
Grades
KCPK30
Coated carbide grade with CVD multilayer (TiN/TiCN/Al2O3) and advanced Beyond™ post-coat treatment. Substrate is very tough. KCPK30 has a wide application area in general and roughing milling of steels and cast irons. Performs best dry, but can also be used wet.
Features and benefits
- Pressed-to-size, for lowest cost per cutting edge
Create Solution to calculate Feeds and Speeds
After creating a solution just choose the Feeds & Speeds icon and our system will provide recommendations. You can customize the information by adding your machine and specifications or make adjustments using the sliders.
Insert Selection
Insert Selection Guide
Material | Light | Medium | Heavy | |||
P1–P2 | .E..GD | KCPM40 | .S..GD2 | KCPM40 | .E..HD2 | KCPM40 |
P3–P4 | .E..GD | KCPM40 | .S..GD2 | KCPK30 | .E..HD2 | KCPK30 |
P5–P6 | .E..GD | KC725M | .S..GD2 | KC725M | .E..HD2 | KC725M |
M1–M2 | .E..LD | KC522M | .E..GD | KCSM40 | .E..HD2 | KC522M |
M3 | .E..GD | KCSM40 | .S..GD2 | KCPM40 | .E..HD2 | KCPM40 |
K1–K2 | .S..GD2 | KCK20B | .E..HD2 | KCK20B | .E..HD2 | KCK15 |
K3 | .S..GD2 | KCK20B | .E..HD2 | KCK20B | .E..HD2 | KCK15 |
N1–N2 | .F..LDJ | KC410M | .F..LDJ | KC410M | .E..LDJ | KC422M |
N3 | .F..LDJ | KC410M | .F..LDJ | KC410M | .E..LDJ | KC422M |
S1–S2 | .E..GD | KC725M | .S..GD2 | KC725M | .E..HD2 | KC725M |
S3 | .E..GD | KCSM40 | .S..GD2 | KC725M | .E..HD2 | KC725M |
S4 | .E..GD | KCSM40 | .S..GD2 | KC725M | .E..HD2 | KC522M |
H1 | – | – | – | – | – | – |
I have read and accepted the Terms & Conditions of use