Product Similar To:
KenCut™ AQ • ALSR • Radiused • 2-3 Flutes • 1.25 x D • Internal Coolant • Plain Shank • Inch
PCD End Mill for Roughing and Finishing of Aluminum
Material Number6752768
ISO Catalog IDALSR2RA1000N125HAR015IANSI Catalog IDALSR2RA1000N125HAR015I
- N Non-Ferrous
Trochoidal Milling
Slotting: Square End
Face Milling
Slotting: Square End
Side Milling/Shoulder Milling: Square End
Side Milling/Shoulder Milling: Roughing
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
Material Number | 6752768 |
ISO Catalog ID | ALSR2RA1000N125HAR015I |
ANSI Catalog ID | ALSR2RA1000N125HAR015I |
Grade | KD1410 |
Adapter Style Machine Side | Straight-Cylindrical |
[D1] Effective Cutting Diameter | 25.4 mm |
[D1] Effective Cutting Diameter | 1 in |
[D] Adapter / Shank / Bore Diameter | 25.4 mm |
[D] Adapter / Shank / Bore Diameter | 1 in |
[D3] Neck Diameter | 24.6 mm |
[D3] Neck Diameter | 0.9685 in |
[AP1MAX] 1st Maximum Cutting Depth | 31.75 mm |
[AP1MAX] 1st Maximum Cutting Depth | 1.25 in |
[L3] Usable Length | 55 mm |
[L3] Usable Length | 2.1654 in |
[L] Overall Length | 107.95 mm |
[L] Overall Length | 4.25 in |
[Re] Corner Radius | 0.375 mm |
[Re] Corner Radius | 0.015 in |
[Z] Number of Flutes | 2 |
Workpiece Materials
- Non-Ferrous
Uses and application
Trochoidal Milling
Slotting: Square End
Face Milling
Slotting: Square End
Side Milling/Shoulder Milling: Square End
Side Milling/Shoulder Milling: Roughing
Grades
KD1410
A PCD-tip brazed to carbide for machining aluminum with a very high silicon content, abrasive non-ferrous materials, and fiber-reinforced plastics. KD1410 can be used at very high cutting speeds, even where good surface finishes are required. This grade can be used both wet or dry but is suggested to use coolant where good surface finishes are required.
Features and benefits
- End mills with polycrystalline diamond (PCD) for high-speed aluminum machining, reducing maching time drastically.
- PCD end mills provide up to ten times higher productivity compared to solid carbide end mills.
- Minimum quantity lubrication ready (MQL Ready).
- Sharp cutting edges and low friction rake surfaces guarantee high quality surface finishes.
Create Solution to calculate Feeds and Speeds
After creating a solution just choose the Feeds & Speeds icon and our system will provide recommendations. You can customize the information by adding your machine and specifications or make adjustments using the sliders.
I have read and accepted the Terms & Conditions of use