Taper Flange Mount Adapter • HSK125A • Inch

Name: Taper Flange Mount Adapter • HSK125A • Inch
SKU: 100131963

Taper Flange Mount Adapter • HSK125A

Filters and Columns

Select Filters

Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.

ISO Catalog Number ANSI Catalog Number
[D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side
Bolt Circle Thread Size [G1]
[L1] Gage Length [L1] Gage Length
[CSMS] System Size Machine Side
[CSWS] System Size Workpiece Side
Weight Kilograms

Displaying 1- 1 of 1 results

Select Columns

Metric

Inch

Show

Metric

Inch

SAP Material Number	ISO Catalog Number	ANSI Catalog Number	[D2] Body Diameter 1 Workpiece Side	[D2] Body Diameter 1 Workpiece Side	Bolt Circle Thread Size [G1]	[L1] Gage Length	[L1] Gage Length	[CSMS] System Size Machine Side	[CSWS] System Size Workpiece Side	Weight Kilograms
6113478	HSK125ABTF46262	HSK125ABTF46262	117.4800	4.625	1/2-20 UNF	66.4250	2.615	HSK125A	BTF46	6.65
List price: $1,820.70 /each. Your price:: Qty Oops! we don't have that many in stock. Adjusted to meet the minimum package size.

Insert Selection Guide

Material Group	LightMachining		GeneralPurpose		HeavyMachining
	(Light geometry)				(Strong geometry)
	wear resistance				toughness
	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	–	–	–	–	–	–
P3–P4	–	–	–	–	–	–
P5–P6	.S..GDH	KCSM40	.S..GDH	KCSM40	.S..GDH	KCSM40
M1–M2	.S..GDH	KCSM40	.S..GDH	KCSM40	.S..GDH	KCSM40
M3	.S..GDH	KCSM40	.S..GDH	KCSM40	.S..GDH	KCSM40
K1–K2	–	–	–	–	–	–
K3	–	–	–	–	–	–
N1–N2	–	–	–	–	–	–
N3	–	–	–	–	–	–
S1–S2	.S..GDH	KCSM40	.S..GDH	KCSM40	.S..GDH	KCSM40
S3	.S..GDH	KCSM40	.S..GDH	KCSM40	.S..GDH	KCSM40
S4	.S..GDH	KCSM40	.S..GDH	KCSM40	.S..GDH	KCSM40
H1	–	–	–	–	–	–

Recommended Starting Feeds [IPT]

		Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)
Material	Insert Geometry	5%			10%			20%			30%			40–100%			Insert Geometry
P5	.S..GDH	–	–	–	.007	.010	.016	.006	.009	.014	.005	.007	.012	.003	.004	.006	.S..GDH
P6	.S..GDH	–	–	–	.007	.008	.013	.006	.007	.011	.005	.006	.009	.003	.003	.005	.S..GDH
M1	.S..GDH	–	–	–	.007	.010	.015	.006	.009	.013	.005	.007	.011	.003	.004	.006	.S..GDH
M2	.S..GDH	–	–	–	.007	.010	.015	.006	.009	.013	.005	.007	.011	.003	.004	.006	.S..GDH
M3	.S..GDH	–	–	–	.007	.008	.013	.006	.007	.011	.005	.006	.009	.003	.003	.005	.S..GDH
S1	.S..GDH	–	–	–	.007	.006	.010	.006	.006	.009	.005	.005	.007	.003	.003	.004	.S..GDH
S2	.S..GDH	–	–	–	.007	.006	.010	.006	.006	.009	.005	.005	.007	.003	.003	.004	.S..GDH
S3	.S..GDH	–	–	–	.007	.008	.013	.006	.007	.011	.005	.006	.009	.003	.003	.005	.S..GDH
S4	.S..GDH	–	–	–	.007	.010	.015	.006	.009	.013	.005	.007	.011	.003	.004	.006	.S..GDH

LightMachining

GeneralPurpose

HeavyMachining

Recommended Starting Feeds [IPT]

		Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)
Material	Insert Geometry	5%			10%			20%			30%			40–100%			Insert Geometry
P5	.S..GDH	–	–	–	.007	.012	.018	.006	.010	.016	.005	.008	.013	.003	.005	.007	.S..GDH
P6	.S..GDH	–	–	–	.007	.010	.015	.006	.009	.013	.005	.007	.011	.003	.004	.006	.S..GDH
M1	.S..GDH	–	–	–	.007	.011	.017	.006	.010	.015	.005	.008	.012	.003	.004	.007	.S..GDH
M2	.S..GDH	–	–	–	.007	.011	.017	.006	.010	.015	.005	.008	.012	.003	.004	.007	.S..GDH
M3	.S..GDH	–	–	–	.007	.010	.015	.006	.009	.013	.005	.007	.011	.003	.004	.006	.S..GDH
S1	.S..GDH	–	–	–	.007	.008	.012	.006	.007	.011	.005	.006	.009	.003	.003	.005	.S..GDH
S2	.S..GDH	–	–	–	.007	.008	.012	.006	.007	.011	.005	.006	.009	.003	.003	.005	.S..GDH
S3	.S..GDH	–	–	–	.007	.009	.014	.006	.008	.012	.005	.007	.010	.003	.004	.006	.S..GDH
S4	.S..GDH	–	–	–	.007	.011	.017	.006	.010	.015	.005	.008	.012	.003	.004	.007	.S..GDH

LightMachining

GeneralPurpose

HeavyMachining

Empfohlene Anfangsvorschübe [mm]

		Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)
Material	Insert Geometry	5%			10%			20%			30%			40–100%			Insert Geometry
P5	.S..GDH	–	–	–	0,18	0,26	0,40	0,16	0,23	0,36	0,13	0,19	0,29	0,07	0,10	0,16	.S..GDH
P6	.S..GDH	–	–	–	0,18	0,21	0,33	0,16	0,19	0,29	0,13	0,15	0,24	0,07	0,08	0,13	.S..GDH
M1	.S..GDH	–	–	–	0,18	0,24	0,38	0,16	0,22	0,34	0,13	0,18	0,27	0,07	0,10	0,15	.S..GDH
M2	.S..GDH	–	–	–	0,18	0,24	0,38	0,16	0,22	0,34	0,13	0,18	0,27	0,07	0,10	0,15	.S..GDH
M3	.S..GDH	–	–	–	0,18	0,21	0,33	0,16	0,19	0,29	0,13	0,15	0,24	0,07	0,08	0,13	.S..GDH
S1	.S..GDH	–	–	–	0,18	0,16	0,25	0,16	0,15	0,22	0,13	0,12	0,18	0,07	0,07	0,10	.S..GDH
S2	.S..GDH	–	–	–	0,18	0,16	0,25	0,16	0,15	0,22	0,13	0,12	0,18	0,07	0,07	0,10	.S..GDH
S3	.S..GDH	–	–	–	0,18	0,21	0,33	0,16	0,19	0,29	0,13	0,15	0,24	0,07	0,08	0,13	.S..GDH
S4	.S..GDH	–	–	–	0,18	0,24	0,38	0,16	0,22	0,34	0,13	0,18	0,27	0,07	0,10	0,15	.S..GDH

LightMachining

GeneralPurpose

HeavyMachining

Empfohlene Anfangsvorschübe [mm]

		Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)
Material	Insert Geometry	5%			10%			20%			30%			40–100%			Insert Geometry
P5	.S..GDH	–	–	–	0,18	0,29	0,45	0,16	0,26	0,40	0,13	0,21	0,33	0,07	0,12	0,18	.S..GDH
P6	.S..GDH	–	–	–	0,18	0,24	0,38	0,16	0,22	0,34	0,13	0,18	0,27	0,07	0,10	0,15	.S..GDH
M1	.S..GDH	–	–	–	0,18	0,28	0,43	0,16	0,25	0,38	0,13	0,20	0,31	0,07	0,11	0,17	.S..GDH
M2	.S..GDH	–	–	–	0,18	0,28	0,43	0,16	0,25	0,38	0,13	0,20	0,31	0,07	0,11	0,17	.S..GDH
M3	.S..GDH	–	–	–	0,18	0,24	0,38	0,16	0,22	0,34	0,13	0,18	0,27	0,07	0,10	0,15	.S..GDH
S1	.S..GDH	–	–	–	0,18	0,20	0,30	0,16	0,17	0,27	0,13	0,14	0,22	0,07	0,08	0,12	.S..GDH
S2	.S..GDH	–	–	–	0,18	0,20	0,30	0,16	0,17	0,27	0,13	0,14	0,22	0,07	0,08	0,12	.S..GDH
S3	.S..GDH	–	–	–	0,18	0,23	0,35	0,16	0,20	0,31	0,13	0,17	0,26	0,07	0,09	0,14	.S..GDH
S4	.S..GDH	–	–	–	0,18	0,28	0,43	0,16	0,25	0,38	0,13	0,20	0,31	0,07	0,11	0,17	.S..GDH

LightMachining

GeneralPurpose

HeavyMachining

Recommended Starting Speeds [SFM]

Material Group		KC725M			KCSM40
P	1
	2
	3
	4
	5	390	355	315	820	450	410
	6	340	265	210	740	415	375
M	1	450	390	355	885	415	375
	2	410	340	290	885	415	375
	3	300	265	210	655	290	260
K	1
	2
	3
N	1
	2
	3
S	1	90	80	65	195	90	75
	2	90	80	65	165	90	70
	3	120	90	65	180	105	80
	4	145	120	80	260	150	115
H	1
	2
	3

Recommended Starting Speeds [SFM]

Material Group		KC725M			KCSM40
P	1
	2
	3
	4
	5	390	355	315	820	450	410
	6	340	265	210	740	415	375
M	1	450	390	355	885	415	375
	2	410	340	290	885	415	375
	3	300	265	210	655	290	260
K	1
	2
	3
N	1
	2
	3
S	1	90	80	65	195	90	75
	2	90	80	65	165	90	70
	3	120	90	65	180	105	80
	4	145	120	80	260	150	115
H	1
	2
	3

Empfohlene Startwerte für Schnittgeschwindigkeiten [m/min]

Material Group		KC725M			KCSM40
P	1
	2
	3
	4
	5	120	110	95	250	138	125
	6	105	80	65	225	127	115
M	1	135	120	110	270	127	115
	2	125	105	90	270	127	115
	3	90	80	65	200	88	80
K	1
	2
	3
N	1
	2
	3
S	1	30	25	20	60	25	23
	2	30	25	20	50	23	21
	3	35	30	20	55	26	24
	4	45	35	25	80	39	35
H	1
	2
	3

Empfohlene Startwerte für Schnittgeschwindigkeiten [m/min]

Material Group		KC725M			KCSM40
P	1
	2
	3
	4
	5	120	110	95	250	138	125
	6	105	80	65	225	127	115
M	1	135	120	110	270	127	115
	2	125	105	90	270	127	115
	3	90	80	65	200	88	80
K	1
	2
	3
N	1
	2
	3
S	1	30	25	20	60	25	23
	2	30	25	20	50	23	21
	3	35	30	20	55	26	24
	4	45	35	25	80	39	35
H	1
	2
	3

Suggestions

Product Suggestions

Product Categories

Resources

Taper Flange Mount Adapter • HSK125A • Inch

Taper Flange Mount Adapter • HSK125A

Insert Selection Guide

Recommended Starting Feeds [IPT]

Recommended Starting Feeds [IPT]

Empfohlene Anfangsvorschübe [mm]

Empfohlene Anfangsvorschübe [mm]

Recommended Starting Speeds [SFM]

Recommended Starting Speeds [SFM]

Empfohlene Startwerte für Schnittgeschwindigkeiten [m/min]

Empfohlene Startwerte für Schnittgeschwindigkeiten [m/min]

Hilfe

Support

SHOP

Karrieren

BLEIBEN SIE IN KONTAKT

⤓ NOVO App

Search our Drawing Database

Suggestions

Product Suggestions

Product Categories

Resources

Taper Flange Mount Adapter • HSK125A • Inch

Taper Flange Mount Adapter • HSK125A

Insert Selection Guide

Recommended Starting Feeds [IPT]

Recommended Starting Feeds [IPT]

Empfohlene Anfangsvorschübe [mm]

Empfohlene Anfangsvorschübe [mm]

Recommended Starting Speeds [SFM]

Recommended Starting Speeds [SFM]

Empfohlene Startwerte für Schnittgeschwindigkeiten [m/min]

Empfohlene Startwerte für Schnittgeschwindigkeiten [m/min]

Hilfe

Support

SHOP

Karrieren

BLEIBEN SIE IN KONTAKT

⤓ NOVO App

Search our Drawing Database

We have found the following CAD Drawings