successfully added to cart
View Cart

Tieflochbohren (bis zu 10xD) • HTS-Systeme

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Select First Choice
  • CN (69)
  • DE (69)
  • GB (52)
  • IN (28)
  • US (69)
Applications
  • Convex Drilling Convex Drilling (2)
  • Drilling Drilling (75)
  • ID Thread Turning ID Thread Turning (1)
Workpiece Material
  • P Steel (309)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (303)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (309)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (309)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (309)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (309)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (309)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (309)
  • M Stainless Steel (285)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (285)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (285)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (285)
  • K Cast Iron (326)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (326)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (326)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (326)
  • N Non-Ferrous Materials (238)
    • N1
      Wrought Aluminum
      (238)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (238)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (238)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (238)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (238)
    • N6
      Carbon, Graphite Composites, CFRP
      (238)
    • N7
      MMC's
      (231)
  • S High-Temp Alloys (266)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (266)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (266)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (266)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (266)
  • H Hardened Materials (109)
    • H1
      Hardened Materials 44-48 HRC
      (109)
    • H2
      Hardened Materials 48-55 HRC
      (109)
    • H3
      Hardened Materials 56-60 HRC
      (109)
    • H4
      Hardened Materials >60 HRC
      (109)
Cutting Diameter
  • 4.0 (3)
  • 5.0 (4)
  • 6.0 (3)
  • 8.0 (10)
  • 10.0 (11)
  • 15.0 (3)
  • 20.0 (3)
  • 25.0 (3)
  • 30.0 (3)
  • 40.0 (1)
  • 43.0 (1)
  • 45.0 (1)
  • 46.0 (1)
  • 49.0 (1)
  • 50.0 (1)
  • 52.0 (1)
  • 55.0 (1)
  • 58.0 (1)
  • 63.0 (2)
  • 68.0 (1)
  • 73.0 (1)
  • 78.0 (2)
  • 84.0 (1)
  • 90.0 (1)
  • 96.0 (2)
  • 102.0 (1)
  • 108.0 (1)
  • 115.0 (1)
  • 122.0 (1)
  • 130.0 (1)
  • 140.0 (1)
  • 150.0 (1)
  • 158.0 (1)
  • 162.0 (1)
  • 180.0 (1)
  • 195.0 (1)
  • 213.0 (1)
  • 230.0 (1)
  • 260.0 (1)
to
Cutting Diameter
  • 0.1575 (3)
  • 0.1969 (4)
  • 0.2362 (3)
  • 0.315 (10)
  • 0.3937 (11)
  • 0.5906 (3)
  • 0.7874 (3)
  • 0.9843 (3)
  • 1.1811 (3)
  • 1.5748 (1)
  • 1.6929 (1)
  • 1.77 (1)
  • 1.811 (1)
  • 1.9291 (1)
  • 1.97 (1)
  • 2.0472 (1)
  • 2.17 (1)
  • 2.28 (1)
  • 2.48 (2)
  • 2.68 (1)
  • 2.87 (1)
  • 3.07 (2)
  • 3.31 (1)
  • 3.54 (1)
  • 3.78 (2)
  • 4.02 (1)
  • 4.25 (1)
  • 4.53 (1)
  • 4.8 (1)
  • 5.12 (1)
  • 5.51 (1)
  • 5.91 (1)
  • 6.22 (1)
  • 6.38 (1)
  • 7.09 (1)
  • 7.68 (1)
  • 8.39 (1)
  • 9.06 (1)
  • 10.24 (1)
to
Cutting Condition
  • Interrupted (76)
  • Stable (148)
  • Unstable (127)
Maximum Hole Depth [L4]
  • 0.315 (2)
  • 0.378 (2)
  • 0.3937 (2)
  • 0.4449 (1)
  • 16.9291 (1)
  • 18.1102 (1)
  • 19.2913 (1)
  • 19.685 (1)
  • 20.4724 (1)
  • 21.6535 (2)
  • 22.8346 (1)
  • 24.8031 (1)
  • 26.7717 (2)
  • 29.5276 (7)
  • 30.7087 (3)
  • 39.3701 (5)
  • 41.7323 (3)
  • 53.5433 (4)
to
Maximum Hole Depth [L4]
  • 8.0 (2)
  • 9.6 (2)
  • 10.0 (2)
  • 11.3 (1)
  • 430.0 (1)
  • 460.0 (1)
  • 490.0 (1)
  • 500.0 (1)
  • 520.0 (1)
  • 550.0 (2)
  • 580.0 (1)
  • 630.0 (1)
  • 680.0 (2)
  • 750.0 (7)
  • 780.0 (3)
  • 1000.0 (5)
  • 1060.0 (3)
  • 1360.0 (4)
to
Cutting Condition Material
  • K1 (92)
  • K2 (98)
  • K3 (93)
  • M1 (72)
  • M2 (78)
  • M3 (76)
  • N1 (73)
  • N2 (73)
  • N3 (73)
  • N4 (71)
  • N5 (74)
  • N6 (64)
  • N7 (64)
  • P0 (63)
  • P1 (106)
  • P2 (106)
  • P3 (106)
  • P4 (109)
  • P5 (106)
  • P6 (106)
  • S1 (65)
  • S2 (65)
  • S3 (64)
  • S4 (64)
Reach
  • 9.4 (1)
  • 9.6 (2)
  • 10.15 (2)
  • 11.3 (2)
  • 12.0 (2)
  • 17.3 (1)
  • 23.0 (1)
  • 29.0 (1)
  • 36.0 (1)
to
Reach
  • 0.3701 (1)
  • 0.378 (2)
  • 0.3996 (2)
  • 0.4449 (2)
  • 0.4724 (2)
  • 0.6811 (1)
  • 0.9055 (1)
  • 1.1417 (1)
  • 1.4173 (1)
to
Connection Style
  • HTS (33)
  • HTS Pilot Drill Shank (18)
  • HTS-C Pilot Drill Shank (18)
  • HTS-R Pilot Drill Shank (7)
Number of Flutes
  • 2 (76)
Cutting Edges Per Insert
  • 2.0 (101)
  • 4.0 (136)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.2 (7)
  • 0.3 (5)
  • 0.4 (163)
  • 0.6 (8)
  • 0.79 (37)
  • 0.8 (144)
  • 1.0 (50)
  • 1.2 (68)
  • 1.6 (45)
  • 2.0 (22)
to
Corner Radius
  • 0.008 (7)
  • 0.012 (5)
  • 0.015 (9)
  • 0.0156 (118)
  • 0.016 (55)
  • 0.0236 (8)
  • 0.031 (62)
  • 0.0313 (146)
  • 0.0315 (25)
  • 0.039 (9)
  • 0.0394 (41)
  • 0.0469 (28)
  • 0.0472 (50)
  • 0.0625 (45)
  • 0.0787 (22)
to
application
Coating
  • TiN (18)
  • Uncoated (17)
Drilling Condition
  • Interrupted (22)
  • Stable (94)
  • Unstable (73)
Drilling Condition Material
  • K1 (38)
  • K2 (44)
  • K3 (39)
  • M1 (18)
  • M2 (24)
  • M3 (22)
  • N1 (19)
  • N2 (19)
  • N3 (19)
  • N4 (17)
  • N5 (20)
  • N6 (10)
  • N7 (10)
  • P0 (9)
  • P1 (52)
  • P2 (52)
  • P3 (52)
  • P4 (55)
  • P5 (52)
  • P6 (52)
  • S1 (11)
  • S2 (11)
  • S3 (10)
  • S4 (10)
Grade Of Cutting Tool
  • A30 (13)
  • A30-C (1)
  • AS3 (13)
  • CD4 (51)
  • CM4 (38)
  • CS3 (2)
  • CS5 (75)
  • G13 (6)
  • K6 (10)
  • KC7020 (15)
  • KC7025 (15)
  • KC7140 (107)
  • KC720 (76)
  • KC7210 (44)
  • KC7215 (120)
  • KC7225 (87)
  • KC7315 (6)
  • KC7325 (2)
  • KC7815 (101)
  • KC7820 (77)
  • KC7845 (10)
  • KC7935 (72)
  • KC810 (72)
  • KC990 (73)
  • KCPK10 (112)
  • KCU25 (133)
  • KCU40 (134)
  • KD1425 (81)
  • KM1 (54)
  • KMF (72)
  • KU40D (72)
Hand Of Tool
  • R (76)
Drill Type
  • 81-06 (43)
  • 86-01 (33)
Wiper Insert
  • N (237)
frontEnd
Insert Shape
  • B-PARALLELOGRAM 82 (10)
  • S-SQUARE 90 (281)
  • W-TRIGON 80 (28)
  • X-TRIGON 84 (44)
Front End Type
  • HTS - Deep Hole Index Drill (1)
Front End Style
  • HTS01 Standard HTS Shank (1)
Point Angle
  • 118.0 (61)
  • 130.0 (10)
to
Gage Length
  • 60.8000 (3)
  • 75.5000 (2)
  • 77.5000 (1)
  • 85.0000 (2)
  • 87.0000 (3)
  • 90.0000 (2)
  • 90.2000 (1)
  • 92.0000 (2)
  • 93.9000 (1)
  • 94.0000 (4)
  • 96.0000 (2)
  • 99.0000 (1)
  • 100.0000 (2)
  • 104.9000 (1)
  • 106.0000 (1)
  • 110.0000 (4)
  • 112.0000 (4)
  • 113.9000 (1)
  • 114.0000 (1)
  • 114.3000 (3)
  • 119.0000 (2)
  • 121.0000 (1)
  • 125.0000 (2)
  • 135.0000 (1)
  • 139.6000 (1)
  • 139.7000 (2)
  • 160.0000 (3)
  • 163.9000 (1)
  • 165.0000 (1)
  • 168.7500 (2)
  • 175.0000 (1)
  • 177.7000 (1)
  • 181.4500 (1)
  • 200.0000 (2)
  • 204.5000 (1)
  • 210.0000 (4)
  • 212.0000 (2)
  • 220.0000 (1)
  • 234.2500 (1)
  • 268.0000 (1)
  • 283.0500 (2)
  • 285.0500 (1)
  • 308.4500 (1)
  • 310.0000 (2)
  • 312.0000 (2)
  • 314.0000 (3)
  • 316.0000 (1)
  • 331.5000 (1)
  • 333.5000 (1)
  • 360.0000 (1)
  • 395.0000 (1)
  • 399.3500 (1)
  • 448.1500 (2)
  • 458.5000 (1)
  • 460.0000 (2)
  • 462.0000 (2)
  • 464.0000 (1)
  • 488.2500 (1)
  • 498.9500 (1)
  • 510.0000 (1)
  • 514.0000 (1)
  • 516.0000 (1)
  • 536.7000 (1)
  • 612.0000 (2)
  • 614.0000 (1)
  • 649.0000 (1)
  • 653.3500 (1)
  • 790.7000 (1)
  • 793.0500 (1)
Gage Length
  • 2.3940 (3)
  • 2.9720 (2)
  • 3.0510 (1)
  • 3.3465 (2)
  • 3.4252 (3)
  • 3.5433 (2)
  • 3.5510 (1)
  • 3.6220 (2)
  • 3.6969 (1)
  • 3.7001 (4)
  • 3.7795 (2)
  • 3.8976 (1)
  • 3.9370 (2)
  • 4.1300 (1)
  • 4.1732 (1)
  • 4.3307 (4)
  • 4.4094 (4)
  • 4.4843 (1)
  • 4.4882 (1)
  • 4.5000 (3)
  • 4.6850 (2)
  • 4.7638 (1)
  • 4.9213 (2)
  • 5.3150 (1)
  • 5.5000 (3)
  • 6.2992 (3)
  • 6.4528 (1)
  • 6.5000 (1)
  • 6.6440 (2)
  • 6.8898 (1)
  • 7.0000 (1)
  • 7.1440 (1)
  • 7.8740 (2)
  • 8.0510 (1)
  • 8.2677 (4)
  • 8.3465 (2)
  • 8.6614 (1)
  • 9.2220 (1)
  • 10.5510 (1)
  • 11.1440 (2)
  • 11.2220 (1)
  • 12.1440 (1)
  • 12.2047 (2)
  • 12.2835 (2)
  • 12.3622 (3)
  • 12.4409 (1)
  • 13.0510 (1)
  • 13.1300 (1)
  • 14.1732 (1)
  • 15.5510 (1)
  • 15.7220 (1)
  • 17.6440 (2)
  • 18.0510 (1)
  • 18.1102 (2)
  • 18.1890 (2)
  • 18.2677 (1)
  • 19.2220 (1)
  • 19.6440 (1)
  • 20.0787 (1)
  • 20.2362 (1)
  • 20.3150 (1)
  • 21.1300 (1)
  • 24.0945 (2)
  • 24.1732 (1)
  • 25.5510 (1)
  • 25.7220 (1)
  • 31.1300 (1)
  • 31.2220 (1)
Front End Size
  • 27.0 (1)
to
Front End Size
  • 1.063 (1)
to
insertGeometry
Shape
  • S-SQUARE 90 (237)
Insert IC Size
  • 0.2188 (6)
  • 0.25 (37)
  • 0.3048 (1)
  • 0.3125 (51)
  • 0.375 (56)
  • 0.5 (53)
  • 0.625 (33)
to
Insert IC Size
  • 5.56 (6)
  • 6.35 (37)
  • 7.742 (1)
  • 7.937 (23)
  • 7.94 (28)
  • 9.525 (56)
  • 12.7 (53)
  • 15.732 (23)
  • 15.875 (10)
to
Cutting Edge Length
  • 0.213 (6)
  • 0.244 (15)
  • 0.25 (22)
  • 0.3048 (1)
  • 0.307 (13)
  • 0.3125 (38)
  • 0.3694 (23)
  • 0.375 (33)
  • 0.4944 (13)
  • 0.5 (50)
  • 0.619 (23)
to
Cutting Edge Length
  • 5.417 (6)
  • 6.207 (15)
  • 6.35 (22)
  • 7.742 (1)
  • 7.797 (13)
  • 7.937 (38)
  • 9.382 (23)
  • 9.525 (33)
  • 12.557 (13)
  • 12.7 (50)
  • 15.732 (23)
to
Chip Breaker CBMD
  • 20 (43)
  • 21 (44)
  • 22 (4)
  • 31 (15)
  • FP (37)
  • HP (40)
  • MD (37)
  • MDT (7)
Cutting Tool Material
  • D P (50)
  • H W (291)
Tolerance Class
  • G (61)
  • H (15)
  • P (69)
backEnd
Connection Type
  • CYLINDRICAL (43)
  • HTS SHANK (33)
System Size
  • BT50 (4)
  • CV40 (2)
  • CV50 (13)
  • DV50 (2)
  • HSK100A (2)
Back-End Diameter
  • 0.1575 (3)
  • 0.1969 (4)
  • 0.2362 (3)
  • 0.315 (10)
  • 0.3937 (11)
  • 0.5118 (7)
  • 0.5906 (3)
  • 0.6299 (3)
  • 0.7874 (3)
  • 0.8661 (4)
  • 0.9843 (3)
  • 1.063 (4)
  • 1.1811 (3)
  • 1.2598 (3)
  • 1.5748 (3)
  • 1.9685 (4)
  • 2.3622 (3)
  • 3.1496 (2)
to
Back-End Diameter
  • 4.0 (3)
  • 5.0 (4)
  • 6.0 (3)
  • 8.0 (10)
  • 10.0 (11)
  • 13.0 (7)
  • 15.0 (3)
  • 16.0 (3)
  • 20.0 (3)
  • 22.0 (4)
  • 25.0 (3)
  • 27.0 (4)
  • 30.0 (3)
  • 32.0 (3)
  • 40.0 (3)
  • 50.0 (4)
  • 60.0 (3)
  • 80.0 (2)
to
other
Grade
  • A30 (13)
  • A30-C (1)
  • AS3 (13)
  • CD4 (7)
  • CM4 (3)
  • CS3 (2)
  • CS5 (3)
  • G13 (6)
  • KC7030 (2)
  • KC7140 (20)
  • KC720 (4)
  • KC7210 (9)
  • KC7215 (48)
  • KC7315 (6)
  • KC7815 (14)
  • KC990 (1)
  • KCPK10 (25)
  • KCU25 (46)
  • KCU40 (47)
  • KM1 (10)
Platform
  • Drill Fix (113)
  • HTS (256)
  • HTS-C (79)
Tool Unit
  • I (321)
  • M (489)
kmtConfigurable
  • false (489)
Over All Length [L]
  • 27.4 (1)
  • 27.5 (3)
  • 30.5 (4)
  • 37.0 (3)
  • 38.0 (1)
  • 44.5 (8)
  • 51.0 (1)
  • 54.5 (8)
  • 57.5 (1)
  • 69.0 (1)
  • 85.0 (2)
  • 95.0 (1)
  • 100.0 (3)
  • 105.0 (4)
  • 115.0 (4)
  • 120.0 (4)
  • 130.0 (3)
  • 145.0 (3)
  • 160.0 (4)
  • 185.0 (2)
  • 200.0 (1)
  • 230.0 (2)
to
Over All Length [L]
  • 1.0787 (1)
  • 1.0827 (3)
  • 1.2001 (4)
  • 1.4567 (3)
  • 1.4961 (1)
  • 1.752 (8)
  • 2.0079 (1)
  • 2.1457 (8)
  • 2.2638 (1)
  • 2.7165 (1)
  • 3.3465 (2)
  • 3.7401 (1)
  • 3.937 (3)
  • 4.1338 (4)
  • 4.5276 (4)
  • 4.7244 (4)
  • 5.1181 (3)
  • 5.7087 (3)
  • 6.2992 (4)
  • 7.2835 (2)
  • 7.874 (1)
  • 9.0551 (2)
to
Insert Hand
  • N (175)
  • R (132)
Solid Indexable Tool
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Wendeschneidplatten-Bohrer

Drill Fix™ DFSP™ • HP Wendeschneidplatten
(40 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [D] Insert IC Size [D] Insert IC Size [D1] Insert Hole Size [D1] Insert Hole Size [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [GAA] Insert Rake Angle [Clearance Angle Major Clearance Angle Major Second
1848593 SPGX060304RHP SPGX060304RHP   KC7140 6.3500 .2500 2.6500 .1040 3.1800 .1252 0.4000 .0156 10.000 7.000 11.000
    List price:
    $17.88 /each.
    Your price::
    Qty
    1848597 SPGX070304RHP SPGX070304RHP   KC7140 7.9400 .3125 2.8500 .1120 3.1800 .1252 0.4000 .0156 10.000 7.000 11.000
      List price:
      $18.10 /each.
      Your price::
      Qty
      1848601 SPPX09T308RHP SPPX09T308RHP   KC7140 9.5250 .3750 3.6000 .1417 3.9700 .1563 0.8000 .0312 10.000 7.000 11.000
        List price:
        $20.24 /each.
        Your price::
        Qty
        1848605 SPPX120408RHP SPPX120408RHP   KC7140 12.7000 .5000 4.6000 .1811 4.7630 .1875 0.8000 .0312 10.000 7.000 11.000
          List price:
          $21.38 /each.
          Your price::
          Qty
          3774906 SPPX15T508RHP SPPX15T508RHP   KC7140 15.7320 .6250 5.5000 .2170 5.9500 .2340 0.8000 .0312 10.000 7.000 11.000
            List price:
            $21.89 /each.
            Your price::
            Qty
            4040135 SPGX070308HP SPGX070308HP   KCU25 7.9400 .3125