Screw-On Inserts
Screw-On Inserts
Screw-On Inserts
Screw-On Inserts

CDHB

Screw-On Inserts

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (11)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (11)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (11)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (11)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (11)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (11)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (11)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (11)
  • M Stainless Steel (17)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (17)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (17)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (17)
  • K Cast Iron (2)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (2)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (2)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (2)
  • N Non-Ferrous Materials (1)
    • N1
      Wrought Aluminum
      (1)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (1)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (1)
    • N7
      MMC's
      (1)
  • S High-Temp Alloys (16)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (16)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (16)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (16)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (16)
Applications
  • ID Thread Turning ID Thread Turning (32)
Cutting Condition
  • Lightly Interrupted Cut (8)
  • Smooth Cut (8)
  • Varying Depth of Cut (8)
Cutting Edges Per Insert
  • 2.0 (32)
to
Corner configuration
Corner Radius
  • 0.05 (8)
  • 0.051 (1)
  • 0.18 (11)
  • 0.381 (12)
to
Corner Radius
  • 0.002 (9)
  • 0.007 (11)
  • 0.015 (12)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
  • Lightly Interrupted Cut (8)
  • Smooth Cut (8)
  • Varying Depth of Cut (8)
Grade Of Cutting Tool
  • K00379 (1)
  • K313 (1)
  • K420 (1)
  • KC5010 (3)
  • KC5025 (3)
  • KC710 (3)
  • KC730 (3)
  • KC935 (2)
  • KCU10 (3)
  • KCU25 (3)
  • KD081 (3)
  • KD100 (3)
  • KT315 (2)
  • SPM5F2 (1)
Wiper Insert
  • N (32)
Front-End
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (32)
Insert Geometry
Shape
  • C-DIAMOND/RHOMBIC 80 (32)
Insert IC Size
  • 0.1563 (32)
to
Insert IC Size
  • 3.969 (32)
to
Cutting Edge Length
  • 0.1587 (21)
  • 0.159 (11)
to
Cutting Edge Length
  • 4.03 (32)
to
Cutting Tool Material
  • B L (5)
  • D P (3)
  • H T (2)
  • H W (22)
Tolerance Class
  • H (32)
other
Grade
  • K313 (1)
  • K420 (1)
  • KC5010 (3)
  • KC5025 (3)
  • KC710 (3)
  • KC730 (3)
  • KC935 (2)
  • KCU10 (3)
  • KCU25 (3)
  • KD081 (3)
  • KD100 (3)
  • KT315 (2)
  • SPM5F2 (2)
Platform
  • Screw-On (15)
Tool Unit
  • I (32)
  • M (32)
Insert Hand
  • N (32)
obsoleteFacet
  • true (32)
  • false (19)
Drilling Condition Material
  • K-All (2)
  • M-All (8)
  • P-All (8)
  • S-All (6)
Cutting Condition Material
  • K-All (2)
  • M-All (8)
  • P-All (8)
  • S-All (6)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 10 of 32 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [D1] Insert Hole Size [D1] Insert Hole Size
1174923 CDHBS4T000 CDHB120601 KC710 3.9690 .1563 4.0300 .1587 1.0200 .0400 0.0500 .0020 2.1300 .0840
    1175015 CDHBS4T000 CDHB120601 KC730 3.9690 .1563 4.0300 .1587 1.0200 .0400 0.0500 .0020 2.1300 .0840
      1260160 CDHBS4T000 CDHB120601 KD081 3.9690 .1563 4.0300 .1587 1.0200 .0400 0.0500 .0020 2.1300 .0840
        1937503 CDHBS4T0S0 CDHB120601 KC5010 3.9690 .1563 4.0300 .1587 1.0200 .0400 0.0500 .0020 2.1300 .0840
          1937504 CDHBS4T0S0 CDHB120601 KC5025 3.9690 .1563 4.0300 .1587 1.0200 .0400 0.0500 .0020 2.1300 .0840
            4050607 CDHBS4T0S0 CDHB120601 KCU25 3.9690 .1563 4.0300 .1587 1.0200 .0400 0.0500 .0020 2.1300 .0840
              1260161 CDHBS4T0S0 CDHB120601 KD100 3.9690 .1563 4.0300 .1587 1.0200 .0400 0.0500 .0020 2.1300 .0840
                1937468 CDHBS4T0S0 CDHB120601 SPM5F2 3.9690 .1563 4.0300 .1587 1.0200 .0400 0.0500 .0020 2.1300 .0840
                  1175016 CDHBS4T002 CDHB120605 KC710 3.9690 .1563 4.0300 .1590 1.0200 .0400 0.1800 .0070 2.1300 .0840
                    1937509 CDHBS4T002 CDHB120605 KC5010 3.9690 .1563 4.0300 .1590 1.0200 .0400 0.1800 .0070 2.1300 .0840
                      1937510 CDHBS4T002 CDHB120605 KC5025 3.9690 .1563 4.0300 .1590 1.0200 .0400 0.1800 .0070 2.1300 .0840
                        1937511 CDHBS4T002 CDHB120605 KT315 3.9690 .1563 4.0300 .1590 1.0200 .0400 0.1800 .0070 2.1300 .0840
                          1161903 CDHBS4T002 CDHB120605 KC730 3.9690 .1563 4.0300 .1590 1.0200 .0400 0.1800 .0070 2.1300 .0840
                            1162192 CDHBS4T002 CDHB120605 K313 3.9690 .1563 4.0300 .1590 1.0200 .0400 0.1800 .0070 2.1300 .0840
                              4050608 CDHBS4T002 CDHB120605 KCU25 3.9690 .1563 4.0300 .1590 1.0200 .0400 0.1800 .0070 2.1300 .0840
                                4053323 CDHBS4T002 CDHB120605 KCU10 3.9690 .1563 4.0300 .1590 1.0200 .0400 0.1800 .0070 2.1300 .0840
                                  1161491 CDHBS4T002 CDHB120605 KC935 3.9690 .1563 4.0300 .1590 1.0200 .0400 0.1800 .0070 2.1300 .0840
                                    1260162 CDHBS4T002 CDHB120605 KD081 3.9690 .1563 4.0300 .1590 1.0200 .0400 0.1800 .0070 2.1300 .0840
                                      1260163 CDHBS4T002 CDHB120605 KD100 3.9690 .1563 4.0300 .1590 1.0200 .0400 0.1800 .0070 2.1300 .0840
                                        1260165 CDHBS4T004 CDHB12061 KD100 3.9690 .1563 4.0300 .1587 1.0200 .0400 0.3810 .0150 2.1300 .0840
                                          1937506 CDHBS4T004 CDHB12061 KC5010 3.9690 .1563 4.0300 .1587 1.0200 .0400 0.3810 .0150 2.1300 .0840
                                            1937507 CDHBS4T004 CDHB12061 KC5025 3.9690 .1563 4.0300 .1587 1.0200 .0400 0.3810 .0150 2.1300 .0840
                                              1937508 CDHBS4T004 CDHB12061 KT315 3.9690 .1563 4.0300 .1587 1.0200 .0400 0.3810 .0150 2.1300 .0840
                                                1161904 CDHBS4T004 CDHB12061 KC730 3.9690 .1563 4.0300 .1587 1.0200 .0400 0.3810 .0150 2.1300 .0840
                                                  1777131 CDHBS4T004 CDHB12061 SPM5F2 3.9690 .1563 4.0300 .1587 1.0200 .0400 0.3810 .0150 2.1300 .0840
                                                    4050609 CDHBS4T004 CDHB12061 KCU25 3.9690 .1563 4.0300 .1587 1.0200 .0400 0.3810 .0150 2.1300 .0840
                                                      4053324 CDHBS4T004 CDHB12061 KCU10 3.9690 .1563 4.0300 .1587 1.0200 .0400 0.3810 .0150 2.1300 .0840
                                                        1161492 CDHBS4T004 CDHB12061 KC935 3.9690 .1563 4.0300 .1587 1.0200 .0400 0.3810 .0150 2.1300 .0840
                                                          1162261 CDHBS4T004 CDHB12061 K420 3.9690 .1563 4.0300 .1587 1.0200 .0400 0.3810 .0150 2.1300 .0840
                                                            1178168 CDHBS4T004 CDHB12061 KC710 3.9690 .1563 4.0300 .1587 1.0200 .0400 0.3810 .0150 2.1300 .0840
                                                              1260164 CDHBS4T004 CDHB12061 KD081 3.9690 .1563 4.0300 .1587 1.0200 .0400 0.3810 .0150 2.1300 .0840
                                                                4053312 CDHBS4T0X0 CDHB1206X0 KCU10 3.9690 .1563 4.0300 .1587 1.0200 .0400 0.0510 .0020 2.1340 .0840
                                                                  List price:
                                                                  Discount: %
                                                                  Your price::
                                                                  Replacement This item is not available
                                                                  Replacement Product This item may be available through a distributor
                                                                  Qty

                                                                  Grades

                                                                  • K313

                                                                    Composition: A hard, low binder content, unalloyed WC/Co fine-grain grade.
                                                                    Application: Exceptional edge wear resistance combined with very high strength for machining titanium, cast irons, austenitic stainless steels, non-ferrous metals, non-metals, and most high-temp alloys. Superior thermal deformation and depth-of-cut notch resistance. The grain structure is well controlled for minimal pits and flaws, which contributes to long, reliable service.

                                                                    N Non-Ferrous
                                                                    S High-Temp Alloys
                                                                  • K420

                                                                    K420

                                                                  • KC5010

                                                                    Composition: An advanced PVD AlTiN coating over a very deformation-resistant unalloyed carbide substrate. The new and improved coating enables speeds to be increased by 50–100%.
                                                                    Application: The KC5010 grade is ideal for finishing to general machining of most workpiece materials at higher speeds. Excellent for machining most steels, stainless steels, cast irons, non-ferrous materials, and super alloys under stable conditions. It also performs well machining hardened and short chipping materials.

                                                                    P Steel
                                                                    M Stainless Steel
                                                                    S High-Temp Alloys
                                                                  • KC5025

                                                                    Composition: An advanced PVD-AlTiN-coated grade with a tough, ultra-fine-grain unalloyed substrate.
                                                                    Application: For general-purpose machining of most steels, stainless steels, high-temp alloys, titanium, irons, and non-ferrous materials. Speeds may vary from low to medium and will handle interruptions and high feed rates.

                                                                    M Stainless Steel
                                                                    S High-Temp Alloys
                                                                  • KCU10

                                                                    Composition: An advanced multilayer PVD coating over a very deformation-resistant unalloyed carbide substrate. The new and improved coating improves edge stability with wide range speed and feed capabilities.
                                                                    Application: The KCU10 grade is ideal for finishing to general machining of most workpiece materials at a wide range of speed and feed capabilities. Excellent for machining most steels, stainless steels, cast irons, non-ferrous materials, and super alloys with improved edge toughness and higher cutting speed/feed capability.

                                                                    P Steel
                                                                    M Stainless Steel
                                                                    S High-Temp Alloys
                                                                  • KCU25

                                                                    Turning Composition: An advanced PVD grade with hard AlTiN coating and fine-grain unalloyed substrate. The new and improved coating improves edge stability with wide range speed and feed capabilities.

                                                                    Turning Application: The KCU25 grade is ideal for general machining of most steels, stainless steels, high-temp alloys, titanium, irons, and non-ferrous materials in a wide range of speeds and feeds with improved edge toughness for interrupted cut and high feed rates.

                                                                    Holemaking Composition: Advanced CVD TiCN-Al2O3 coating combined with a tough carbide substrate.

                                                                    Holemaking Application: First choice for steel, stainless steel, and cast iron. This grade offers adequate deformation resistance, excellent edge strength, and superior wear resistance over a wide range of machining conditions for high productivity with very good reliability.

                                                                    M Stainless Steel
                                                                    S High-Temp Alloys
                                                                  • KD100

                                                                    composition: A polycrystalline diamond tip (PCD) brazed onto a
                                                                    carbide substrate.
                                                                    application: The KD100 grade is for general purpose turning. The
                                                                    cutting tool material contains a binder in addition to diamond
                                                                    particles. This makes the KD100 grade suitable for roughing to
                                                                    finishing all types of highly abrasive workpieces, including non-ferrous
                                                                    metals and non-metallics. Use as your first choice on high content
                                                                    silicon aluminum alloys (hypereutectic). Will generally produce good
                                                                    surface finishes. Provides the best mechanical shock resistance of the
                                                                    diamond tool materials. The cutting edge is sharp. This grade operates
                                                                    at very high speeds.

                                                                  • KT315

                                                                    Composition: A multilayer PVD-TiN/TiCN/TiN-coated cermet turning grade.
                                                                    Application: Ideal for high-speed finishing to medium machining of most carbon and alloy steels and stainless steels. Performs very well in cast and ductile iron applications, too. Provides long and consistent tool life and will produce excellent workpiece finishes.

                                                                    P Steel
                                                                    M Stainless Steel
                                                                    K Cast Iron
                                                                  If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                                                  You are about to create a duplicate . Do you want to proceed?
                                                                  You are about to delete Do you want to proceed?
                                                                  What would you like to rename your to?
                                                                  Please enter a valid name
                                                                  Please enter a name for the duplicate
                                                                  Please enter a valid name
                                                                  You are about to add to your My Solutions page. Do you want to proceed?
                                                                  Please enter a valid name
                                                                  Send a copy of

                                                                  Please enter a valid Email
                                                                  Please enter a valid name

                                                                  We have found the following CAD Drawings

                                                                  Select the files you are looking for and download them all at once

                                                                  You should be logged to see your dashboard information
                                                                  The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                                                  item(s) successfully added to the cart
                                                                  View Cart