Back to Solution
Editing Solution
Adding Solution
Solution Name: {{SolutionName}}
DUO-LOCK™ • KenCut™ FF • Radiused • 6 Flutes • Metric
Modular End Milling • FMDF Style
Features and benefits
- Modular end mill for high performance finishing in steels and stainless steels.
- Centre cutting.
Uses and application
Side Milling/Shoulder Milling: Square End
Helix Angle: 45°
Tool Dimensions: Flute Configuration: 6
Corner Style: Corner Radius
Workpiece Materials
P
Steel
M
Stainless Steel
K
Cast Iron
S
High-Temp Alloys
H
Hardened Materials
Filters and Columns
Filters
Filters
Filters
View filters in
Metric
Inch
Workpiece Material
Workpiece Material
-
P Steel (5)
-
P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(5)
-
P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(5)
-
P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(5)
-
P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(5)
-
P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(5)
-
P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(5)
-
P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(5)
-
-
M Stainless Steel (5)
-
M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(5)
-
M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(5)
-
M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(5)
-
-
K Cast Iron (5)
-
K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(5)
-
K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(5)
-
K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(5)
-
-
S High-Temp Alloys (5)
-
S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(5)
-
S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(5)
-
S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(5)
-
S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(5)
-
-
H Hardened Materials (5)
-
H1Hardened Materials 44-48 HRC(5)
-
H2Hardened Materials 48-55 HRC(5)
-
Applications
Applications
-
Face Milling (5)
-
Pocket (5)
-
Pocket Helical (5)
-
Pocket Milling (5)
-
Ramping (5)
-
Shoulder Milling (5)
-
-
Cutting Diameter
Cutting Diameter
-
0.394 in (1)
-
0.473 in (1)
-
0.63 in (1)
-
0.787 in (1)
-
0.984 in (1)
to
Cutting Diameter
Cutting Diameter
-
10.0 mm (1)
-
12.0 mm (1)
-
16.0 mm (1)
-
20.0 mm (1)
-
25.0 mm (1)
to
Cutting Length
Cutting Length
-
15.0 mm (1)
-
18.0 mm (1)
-
24.0 mm (1)
-
30.0 mm (1)
-
37.5 mm (1)
to
Cutting Length
Cutting Length
-
0.591 in (1)
-
0.709 in (1)
-
0.946 in (1)
-
1.181 in (1)
-
1.476 in (1)
to
Reach
Reach
-
0.886 in (1)
-
1.063 in (1)
-
1.417 in (1)
-
1.772 in (1)
-
2.224 in (1)
to
Reach
Reach
-
22.5 mm (1)
-
27.0 mm (1)
-
36.0 mm (1)
-
45.0 mm (1)
-
56.5 mm (1)
to
Corner Radius
Corner Radius
-
0.02 in (1)
-
0.03 in (4)
to
Corner Radius
Corner Radius
-
0.5 mm (1)
-
0.75 mm (4)
to
Back-End
Back-End Diameter
Back-End Diameter
-
9.601 mm (1)
-
11.5 mm (1)
-
15.5 mm (1)
-
19.3 mm (1)
-
24.0 mm (1)
to
Back-End Diameter
Back-End Diameter
-
0.378 in (1)
-
0.453 in (1)
-
0.61 in (1)
-
0.76 in (1)
-
0.946 in (1)
to
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying
1- 5
of 5 results
Metric
Inch
Show
Metric
Inch
| SAP Material Number | ISO Catalog Number | ANSI Catalog Number | Grade | Adapter Style Machine Side | [D1] Effective Cutting Diameter | [D1] Effective Cutting Diameter | [D] Adapter / Shank / Bore Diameter | [D] Adapter / Shank / Bore Diameter | [AP1MAX] 1st Maximum Cutting Depth | [AP1MAX] 1st Maximum Cutting Depth | [L1] Gage Length | [L1] Gage Length | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 6127198 | FMDF1000X6CQE | FMDF1000X6CQE | KCPM15 | DUO-LOCK | 10.0000 | .3937 | 9.6 | .378 | 15.0000 | .5906 | 22.5000 | .8858 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$113.45
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6127199 | FMDF1200X6CQF | FMDF1200X6CQF | KCPM15 | DUO-LOCK | 12.0000 | .4724 | 11.5 | .4528 | 18.0000 | .7087 | 27.0000 | 1.063 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$146.43
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6127200 | FMDF1600X6CQF | FMDF1600X6CQF | KCPM15 | DUO-LOCK | 16.0000 | .6299 | 15.5 | .6102 | 24.0000 | .9449 | 36.0000 | 1.417 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$312.20
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6127311 | FMDF2000X6CQF | FMDF2000X6CQF | KCPM15 | DUO-LOCK | 20.0000 | .7874 | 19.3 | .7598 | 30.0000 | 1.181 | 45.0000 | 1.771 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$386.90
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6127312 | FMDF2500X6CQF | FMDF2500X6CQF | KCPM15 | DUO-LOCK | 25.0000 | .9843 | 24.0 | .9449 | 37.5000 | 1.476 | 56.5000 | 2.224 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$498.83
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
Discount: %
Replacement
This item is no longer available
Replacement Product Please contact customer service for assistance
Replacement Product Please contact customer service for assistance
Qty
Sold in pkg. of
Grades
-
KCPM15
Coated carbide grade with thick PVD coating and optimized chemistry and process for increased wear resistance. Outstanding protection in milling stainless steel to mitigate crater, DOCN (depth-of-cut notching), and flank wear. Excellent performance up to 52 HRC.
P SteelS High-Temp AlloysH Hardened MaterialsK Cast IronM Stainless Steel
| End Mill Tolerances | |
| D1 | tolerance e8 |
| 10–18 | -0,032/-0,059 |
| 18–30 | -0,040/-0,073 |
| 30 | -0,050/-0,089 |
FMDF • Metric
| Material Group |  <="" td=""> | short | medium | long | Recommended feed per tooth (fz = mm/th) for side milling (A). | |||||||||||||
| A | adapter reach | D1 Diameter | ||||||||||||||||
| KCPM15 | KCPM15 | KCPM15 | ||||||||||||||||
| Cutting Speed vc m/min | Cutting Speed vc m/min | Cutting Speed vc m/min | ||||||||||||||||
| ap | ae | Min | Max | Min | Max | Min | Max | mm | 10,0 | 12,0 | 16,0 | 20,0 | 25,0 | |||||
| P | 0 | 1,5 x D | 0,1 x D | 150 | – | 200 | 135 | – | 180 | 135 | – | 180 | fz | 0,072 | 0,083 | 0,101 | 0,114 | 0,124 |
| 1 | 1,5 x D | 0,1 x D | 150 | – | 200 | 135 | – | 180 | 135 | – | 180 | fz | 0,072 | 0,083 | 0,101 | 0,114 | 0,124 | |
| 2 | 1,5 x D | 0,1 x D | 140 | – | 190 | 126 | – | 171 | 126 | – | 171 | fz | 0,072 | 0,083 | 0,101 | 0,114 | 0,124 | |
| 3 | 1,5 x D | 0,1 x D | 120 | – | 160 | 108 | – | 144 | 108 | – | 144 | fz | 0,061 | 0,070 | 0,087 | 0,101 | 0,114 | |
| 4 | 1,5 x D | 0,1 x D | 90 | – | 150 | 81 | – | 135 | 81 | – | 135 | fz | 0,054 | 0,062 | 0,077 | 0,088 | 0,098 | |
| 5 | 1,5 x D | 0,1 x D | 60 | – | 100 | 51 | – | 85 | 48 | – | 80 | fz | 0,048 | 0,056 | 0,070 | 0,081 | 0,091 | |
| 6 | 1,5 x D | 0,1 x D | 50 | – | 75 | 42,5 | – | 63,75 | 40 | – | 60 | fz | 0,040 | 0,047 | 0,057 | 0,065 | 0,071 | |
| M | 1 | 1,5 x D | 0,1 x D | 90 | – | 115 | 72 | – | 92 | 63 | – | 80,5 | fz | 0,061 | 0,070 | 0,087 | 0,101 | 0,114 |
| 2 | 1,5 x D | 0,1 x D | 60 | – | 80 | 48 | – | 64 | 42 | – | 56 | fz | 0,048 | 0,056 | 0,070 | 0,081 | 0,091 | |
| 3 | 1,5 x D | 0,1 x D | 60 | – | 70 | 48 | – | 56 | 42 | – | 49 | fz | 0,040 | 0,047 | 0,057 | 0,065 | 0,071 | |
| K | 1 | 1,5 x D | 0,1 x D | 120 | – | 150 | 108 | – | 135 | 108 | – | 135 | fz | 0,072 | 0,083 | 0,101 | 0,114 | 0,124 |
| 2 | 1,5 x D | 0,1 x D | 110 | – | 140 | 99 | – | 126 | 99 | – | 126 | fz | 0,061 | 0,070 | 0,087 | 0,101 | 0,114 | |
| 3 | 1,5 x D | 0,1 x D | 110 | – | 130 | 99 | – | 117 | 99 | – | 117 | fz | 0,048 | 0,056 | 0,070 | 0,081 | 0,091 | |
| S | 1 | 1,5 x D | 0,1 x D | 50 | – | 90 | 40 | – | 72 | 30 | – | 54 | fz | 0,061 | 0,070 | 0,087 | 0,101 | 0,114 |
| 2 | 1,5 x D | 0,1 x D | 25 | – | 40 | 20 | – | 32 | 15 | – | 24 | fz | 0,032 | 0,037 | 0,046 | 0,054 | 0,061 | |
| 3 | 1,5 x D | 0,1 x D | 25 | – | 40 | 20 | – | 32 | 15 | – | 24 | fz | 0,032 | 0,037 | 0,046 | 0,054 | 0,061 | |
| 4 | 1,5 x D | 0,15 x D | 50 | – | 60 | 40 | – | 48 | 30 | – | 36 | fz | 0,045 | 0,052 | 0,064 | 0,074 | 0,084 | |
| H | 1 | 1,5 x D | 0,1 x D | 80 | – | 140 | 64 | – | 112 | 48 | – | 84 | fz | 0,054 | 0,062 | 0,077 | 0,088 | 0,098 |
| 2 | 1,5 x D | 0,1 x D | 70 | – | 120 | 56 | – | 96 | 42 | – | 72 | fz | 0,040 | 0,047 | 0,057 | 0,065 | 0,071 | |