Back to Solution
Editing Solution
Adding Solution
Solution Name: {{SolutionName}}
DUO-LOCK™ • KenCut™ RR • Chamfered • 4–5 Flutes • Inch
Modular End Milling • RQDB Style
Features and benefits
- Center cutting.
- Cord profile reduces machine power consumption.
- Standard items listed. Additional styles and coatings made-to-order.
Uses and application
Ramping: Blank
Slotting: Square End
Side Milling/Shoulder Milling: Square End
Corner Style: Corner Chamfer
Helix Angle: 20°
Tool Dimensions: Flute Configuration: X (variable)
Workpiece Materials
P
Steel
M
Stainless Steel
K
Cast Iron
S
High-Temp Alloys
H
Hardened Materials
Filters and Columns
Filters
Filters
Filters
View filters in
Metric
Inch
Workpiece Material
Workpiece Material
-
P Steel (5)
-
P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(5)
-
P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(5)
-
P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(5)
-
P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(5)
-
P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(5)
-
P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(5)
-
-
M Stainless Steel (5)
-
M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(5)
-
M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(5)
-
M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(5)
-
-
K Cast Iron (5)
-
K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(5)
-
K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(5)
-
K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(5)
-
-
S High-Temp Alloys (5)
-
S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(5)
-
S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(5)
-
-
H Hardened Materials (5)
-
H1Hardened Materials 44-48 HRC(5)
-
Applications
Applications
-
Pocket (5)
-
Pocket Helical (5)
-
Pocket Milling (5)
-
Pocket Plunge Milling (5)
-
Ramping (5)
-
Shoulder Milling (5)
-
-
-
Slot Milling (5)
-
Slot Square End (5)
Cutting Diameter
Cutting Diameter
-
0.375 in (1)
-
0.5 in (1)
-
0.625 in (1)
-
0.75 in (1)
-
1.0 in (1)
to
Cutting Diameter
Cutting Diameter
-
9.525 mm (1)
-
12.701 mm (1)
-
15.875 mm (1)
-
19.05 mm (1)
-
25.401 mm (1)
to
Cutting Length
Cutting Length
-
14.3 mm (1)
-
19.05 mm (1)
-
23.8 mm (1)
-
28.576 mm (1)
-
38.1 mm (1)
to
Cutting Length
Cutting Length
-
0.564 in (1)
-
0.75 in (1)
-
0.937 in (1)
-
1.125 in (1)
-
1.5 in (1)
to
Reach
Reach
-
0.843 in (1)
-
1.127 in (1)
-
1.407 in (1)
-
1.689 in (1)
-
2.253 in (1)
to
Reach
Reach
-
21.401 mm (1)
-
28.6 mm (1)
-
35.7 mm (1)
-
42.901 mm (1)
-
57.2 mm (1)
to
Number of Flutes
Number of Flutes
-
4 (4)
-
5 (1)
Back-End
Back-End Diameter
Back-End Diameter
-
9.125 mm (1)
-
12.201 mm (1)
-
15.375 mm (1)
-
18.55 mm (1)
-
24.401 mm (1)
to
Back-End Diameter
Back-End Diameter
-
0.359 in (1)
-
0.48 in (1)
-
0.605 in (1)
-
0.73 in (1)
-
0.961 in (1)
to
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying
1- 5
of 5 results
Metric
Inch
Show
Metric
Inch
| SAP Material Number | ISO Catalog Number | ANSI Catalog Number | Grade | Adapter Style Machine Side | [D] Adapter / Shank / Bore Diameter | [D] Adapter / Shank / Bore Diameter | [L1] Gage Length | [L1] Gage Length | [CSMS] System Size Machine Side | [WF] Width of Flat | [WF] Width of Flat | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 6127415 | RQDB0375Y4CV | RQDB0375Y4CV | KCPM15 | DUO-LOCK | 9.125 | .3593 | 21.4000 | .8425 | DL10 | 8.0000 | .3150 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$90.94
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6127416 | RQDB0500Y4CV | RQDB0500Y4CV | KCPM15 | DUO-LOCK | 12.2 | .4803 | 28.6000 | 1.126 | DL12 | 9.5000 | .3740 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$123.32
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6127417 | RQDB0625Y4CV | RQDB0625Y4CV | KCPM15 | DUO-LOCK | 15.375 | .6053 | 35.7000 | 1.405 | DL16 | 13.0000 | .5118 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$252.74
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6127418 | RQDB0750Y4CV | RQDB0750Y4CV | KCPM15 | DUO-LOCK | 18.55 | .7303 | 42.9000 | 1.689 | DL20 | 16.0000 | .6299 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$296.76
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6127419 | RQDB1000Y5CV | RQDB1000Y5CV | KCPM15 | DUO-LOCK | 24.4 | .9606 | 57.2000 | 2.252 | DL25 | 21.0000 | .8268 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$417.91
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
Discount: %
Replacement
This item is no longer available
Replacement Product Please contact customer service for assistance
Replacement Product Please contact customer service for assistance
Qty
Sold in pkg. of
Grades
-
KCPM15
Coated carbide grade with thick PVD coating and optimized chemistry and process for increased wear resistance. Outstanding protection in milling stainless steel to mitigate crater, DOCN (depth-of-cut notching), and flank wear. Excellent performance up to 52 HRC.
P SteelS High-Temp AlloysH Hardened MaterialsK Cast IronM Stainless Steel
| End Mill Tolerances | |
| D1 | tolerance d11 |
| 13/32 11/16" | -0.002/-0.0063" |
| 23/32 1-3/16" | -0.026/ -0.0077" |
RQDB • Inch
| Material Group |  <="" td=""> |  <="" td=""> | short | medium | long | Recommended feed per tooth (IPT = inch/th) for side milling (A). For slotting (B), reduce IPT by 20%. | |||||||||||||
| A | B | adapter reach | D1 Diameter | ||||||||||||||||
| KCPM15 | KCPM15 | KCPM15 | |||||||||||||||||
| Cutting Speed vc SFM | Cutting Speed vc SFM | Cutting Speed vc SFM | frac. | 3/8 | 1/2 | 5/8 | 3/4 | 1 | |||||||||||
| ap | ae | ap | Min | Max | Min | Max | Min | Max | dec. | .3750 | .5000 | .6250 | .7500 | 1.2500 | |||||
| P | 0 | 1.5 x D | 0.5 x D | 1 x D | 390 | – | 520 | 351 | – | 468 | 351 | – | 468 | IPT | .0020 | .0025 | .0029 | .0032 | .0036 |
| 1 | 1.5 x D | 0.5 x D | 1 x D | 390 | – | 520 | 351 | – | 468 | 351 | – | 468 | IPT | .0020 | .0025 | .0029 | .0032 | .0036 | |
| 2 | 1.5 x D | 0.5 x D | 1 x D | 370 | – | 500 | 333 | – | 450 | 333 | – | 450 | IPT | .0020 | .0025 | .0029 | .0032 | .0036 | |
| 3 | 1.5 x D | 0.4 x D | 0.75 x D | 310 | – | 420 | 279 | – | 378 | 279 | – | 378 | IPT | .0017 | .0021 | .0025 | .0028 | .0035 | |
| 4 | 1.5 x D | 0.3 x D | 0.3 x D | 240 | – | 390 | 216 | – | 351 | 216 | – | 351 | IPT | .0015 | .0019 | .0022 | .0024 | .0029 | |
| 5 | 1.5 x D | 0.4 x D | 0.75 x D | 160 | – | 260 | 136 | – | 221 | 128 | – | 208 | IPT | .0013 | .0017 | .0020 | .0022 | .0028 | |
| M | 1 | 1.5 x D | 0.4 x D | 0.75 x D | 240 | – | 300 | 192 | – | 240 | 168 | – | 210 | IPT | .0017 | .0021 | .0025 | .0028 | .0035 |
| 2 | 1.5 x D | 0.4 x D | 0.75 x D | 160 | – | 210 | 128 | – | 168 | 112 | – | 147 | IPT | .0013 | .0017 | .0020 | .0022 | .0028 | |
| 3 | 1.5 x D | 0.4 x D | 0.75 x D | 160 | – | 180 | 128 | – | 144 | 112 | – | 126 | IPT | .0011 | .0014 | .0016 | .0018 | .0021 | |
| K | 1 | 1.5 x D | 0.5 x D | 1 x D | 310 | – | 390 | 279 | – | 351 | 279 | – | 351 | IPT | .0020 | .0025 | .0029 | .0032 | .0036 |
| 2 | 1.5 x D | 0.4 x D | 1 x D | 290 | – | 370 | 261 | – | 333 | 261 | – | 333 | IPT | .0017 | .0021 | .0025 | .0028 | .0035 | |
| 3 | 1.5 x D | 0.4 x D | 1 x D | 290 | – | 340 | 261 | – | 306 | 261 | – | 306 | IPT | .0013 | .0017 | .0020 | .0022 | .0028 | |
| S | 1 | 1.5 x D | 0.4 x D | 0.75 x D | 130 | – | 240 | 104 | – | 192 | 78 | – | 144 | IPT | .0017 | .0021 | .0025 | .0028 | .0035 |
| 3 | 1.5 x D | 0.4 x D | 0.75 x D | 70 | – | 100 | 56 | – | 80 | 42 | – | 60 | IPT | .0009 | .0011 | .0013 | .0015 | .0019 | |
| H | 1 | 1.5 x D | 0.3 x D | 0.3 x D | 210 | – | 370 | 168 | – | 296 | 126 | – | 222 | IPT | .0015 | .0019 | .0022 | .0024 | .0029 |