Back to Solution
Editing Solution
Adding Solution
Solution Name: {{SolutionName}}
DUO-LOCK™ • KenCut™ RR • Radiused • 3 Flutes • Inch
Modular End Milling • RFDD Style • For MillTurn Machines and Lathes
Features and benefits
- RFDD Tips — High-performance roughing solution with excellent chip evacuation, especially in stainless steel.
- The short design and corner radii provide stability and reduce deflection forces.
- Ideally suited to perform long-reach applications on mill-turn machines, and driven tooling on lathes.
- The unique cutting geometry results in low cutting forces, requiring low power consumption.
Uses and application
Ramping: Blank
Slotting: Square End
Side Milling/Shoulder Milling: Square End
Corner Style: Corner Radius
Helix Angle: 35°
Tool Dimensions: Flute Configuration: 3
Workpiece Materials
P
Steel
M
Stainless Steel
K
Cast Iron
H
Hardened Materials
Filters and Columns
Filters
Filters
Filters
View filters in
Metric
Inch
Workpiece Material
Workpiece Material
-
P Steel (4)
-
P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(4)
-
P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(4)
-
P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(4)
-
P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(4)
-
P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(4)
-
P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(4)
-
P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(4)
-
-
M Stainless Steel (4)
-
M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(4)
-
M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(4)
-
M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(4)
-
-
K Cast Iron (4)
-
K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(4)
-
K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(4)
-
K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(4)
-
-
H Hardened Materials (4)
-
H1Hardened Materials 44-48 HRC(4)
-
Cutting Diameter
Cutting Diameter
-
0.375 in (1)
-
0.5 in (1)
-
0.625 in (1)
-
0.75 in (1)
to
Cutting Diameter
Cutting Diameter
-
9.525 mm (1)
-
12.701 mm (1)
-
15.875 mm (1)
-
19.05 mm (1)
to
Cutting Length
Cutting Length
-
7.15 mm (1)
-
9.525 mm (1)
-
11.9 mm (1)
-
14.3 mm (1)
to
Cutting Length
Cutting Length
-
0.281 in (1)
-
0.375 in (1)
-
0.47 in (1)
-
0.564 in (1)
to
Reach
Reach
-
0.656 in (1)
-
0.876 in (1)
-
1.093 in (1)
-
1.314 in (1)
to
Reach
Reach
-
16.651 mm (1)
-
22.25 mm (1)
-
27.75 mm (1)
-
33.375 mm (1)
to
Back-End
Back-End Diameter
Back-End Diameter
-
9.125 mm (1)
-
12.201 mm (1)
-
15.375 mm (1)
-
18.55 mm (1)
to
Back-End Diameter
Back-End Diameter
-
0.359 in (1)
-
0.48 in (1)
-
0.605 in (1)
-
0.73 in (1)
to
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying
1- 4
of 4 results
Metric
Inch
Show
Metric
Inch
| SAP Material Number | ISO Catalog Number | ANSI Catalog Number | Grade | Adapter Style Machine Side | [D] Adapter / Shank / Bore Diameter | [D] Adapter / Shank / Bore Diameter | [L1] Gage Length | [L1] Gage Length | [CSMS] System Size Machine Side | [WF] Width of Flat | [WF] Width of Flat | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 6441025 | RFDD0375Y3AQA | RFDD0375Y3AQA | KCPM15 | DUO-LOCK | 9.125 | .3593 | 16.6400 | .6551 | DL10 | 8.0000 | .3150 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$127.40
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6441026 | RFDD0500Y3AQA | RFDD0500Y3AQA | KCPM15 | DUO-LOCK | 12.2 | .4803 | 22.2500 | .8760 | DL12 | 9.5000 | .3740 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$179.13
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6441027 | RFDD0625Y3AQA | RFDD0625Y3AQA | KCPM15 | DUO-LOCK | 15.375 | .6053 | 27.7600 | 1.092 | DL16 | 13.0000 | .5118 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$398.14
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6441028 | RFDD0750Y3AQA | RFDD0750Y3AQA | KCPM15 | DUO-LOCK | 18.55 | .7303 | 33.3700 | 1.313 | DL20 | 16.0000 | .6299 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$618.66
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
Discount: %
Replacement
This item is no longer available
Replacement Product Please contact customer service for assistance
Replacement Product Please contact customer service for assistance
Qty
Sold in pkg. of
Grades
-
KCPM15
Coated carbide grade with thick PVD coating and optimized chemistry and process for increased wear resistance. Outstanding protection in milling stainless steel to mitigate crater, DOCN (depth-of-cut notching), and flank wear. Excellent performance up to 52 HRC.
P SteelH Hardened MaterialsK Cast IronM Stainless Steel
| End Mill Tolerances | |
| D1 | tolerance d11 |
| 13/32 11/16" | -0.002/-0.0063" |
| 23/32 1-3/16" | -0.026/ -0.0077" |
RFDD • Inch
| Material Group |  <="" td=""> |  <="" td=""> | straight short | conical medium | conical long | Recommended feed per tooth (IPT = inch/th) for side milling (A). For slotting (B), reduce IPT by 20%. | ||||||||||||
| A | B | KCPM15 | KCPM15 | KCPM15 | D1 Diameter | |||||||||||||
| Cutting Speed vc SFM | Cutting Speed vc SFM | Cutting Speed vc SFM | frac. | 3/8 | 1/2 | 5/8 | 3/4 | |||||||||||
| ap | ae | ap | Min | Max | Min | Max | Min | Max | dec. | 0.3750 | 0.5000 | 0.6250 | 0.7500 | |||||
| P | 0 | 0.75 x D | 0.5 x D | 0.5 x D | 490 | – | 660 | 441 | – | 594 | 441 | – | 594 | IPT | 0.0023 | 0.0029 | 0.0034 | 0.0037 |
| 1 | 0.75 x D | 0.5 x D | 0.5 x D | 490 | – | 660 | 441 | – | 594 | 441 | – | 594 | IPT | 0.0023 | 0.0029 | 0.0034 | 0.0037 | |
| 2 | 0.75 x D | 0.5 x D | 0.5 x D | 460 | – | 620 | 414 | – | 558 | 414 | – | 558 | IPT | 0.0023 | 0.0029 | 0.0034 | 0.0037 | |
| 3 | 0.75 x D | 0.5 x D | 0.5 x D | 390 | – | 520 | 351 | – | 468 | 351 | – | 468 | IPT | 0.0019 | 0.0025 | 0.0029 | 0.0033 | |
| 4 | 0.75 x D | 0.4 x D | 0.5 x D | 300 | – | 490 | 270 | – | 441 | 270 | – | 441 | IPT | 0.0017 | 0.0022 | 0.0026 | 0.0029 | |
| 5 | 0.75 x D | 0.5 x D | 0.5 x D | 200 | – | 330 | 170 | – | 281 | 160 | – | 264 | IPT | 0.0016 | 0.0020 | 0.0023 | 0.0026 | |
| 6 | 0.75 x D | 0.4 x D | 0.5 x D | 160 | – | 250 | 136 | – | 213 | 128 | – | 200 | IPT | 0.0013 | 0.0016 | 0.0019 | 0.0021 | |
| M | 1 | 0.75 x D | 0.4 x D | 0.5 x D | 300 | – | 380 | 240 | – | 304 | 210 | – | 266 | IPT | 0.0019 | 0.0025 | 0.0029 | 0.0033 |
| 2 | 0.75 x D | 0.4 x D | 0.5 x D | 200 | – | 260 | 160 | – | 208 | 140 | – | 182 | IPT | 0.0016 | 0.0020 | 0.0023 | 0.0026 | |
| 3 | 0.75 x D | 0.4 x D | 0.5 x D | 200 | – | 230 | 160 | – | 184 | 140 | – | 161 | IPT | 0.0013 | 0.0016 | 0.0019 | 0.0021 | |
| K | 1 | 0.75 x D | 0.5 x D | 0.5 x D | 390 | – | 490 | 351 | – | 441 | 351 | – | 441 | IPT | 0.0023 | 0.0029 | 0.0034 | 0.0037 |
| 2 | 0.75 x D | 0.5 x D | 0.5 x D | 360 | – | 460 | 324 | – | 414 | 324 | – | 414 | IPT | 0.0019 | 0.0025 | 0.0029 | 0.0033 | |
| 3 | 0.75 x D | 0.4 x D | 0.5 x D | 360 | – | 430 | 324 | – | 387 | 324 | – | 387 | IPT | 0.0016 | 0.0020 | 0.0023 | 0.0026 | |
| H | 1 | 0.75 x D | 0.2 x D | 0.3 x D | 260 | – | 460 | 208 | – | 368 | 156 | – | 276 | IPT | 0.0017 | 0.0022 | 0.0026 | 0.0029 |