successfully added to cart
View Cart

Notifications

Mark all as read
Modular Drilling • Carbide Insert  for KSEM PLUS™ B1 Heads
Modular Drilling • Carbide Insert  for KSEM PLUS™ B1 Heads
Modular Drilling • Carbide Insert  for KSEM PLUS™ B1 Heads
Modular Drilling • Carbide Insert  for KSEM PLUS™ B1 Heads

KSEM PLUS™ • Outboard Insert • DFC-MD Geometry

Modular Drilling • Carbide Insert for KSEM PLUS™ B1 Heads

Features and benefits

  • Drilling insert for primary application in stainless steels.

  • DFC inserts provide lateral guidance and good hole quality

  • Two cutting edges.

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (5)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (5)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (5)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (5)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (5)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (5)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (5)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (5)
  • M Stainless Steel (5)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (5)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (5)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (5)
  • K Cast Iron (5)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (5)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (5)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (5)
  • N Non-Ferrous Materials (5)
    • N1
      Wrought Aluminum
      (5)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (5)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (5)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (5)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (5)
    • N6
      Carbon, Graphite Composites, CFRP
      (5)
    • N7
      MMC's
      (5)
  • S High-Temp Alloys (5)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (5)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (5)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (5)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (5)
Select First Choice
  • CN (5)
  • DE (5)
  • GB (2)
  • IN (2)
  • SG (5)
  • US (5)
Cutting Condition
Cutting Condition
  • Interrupted (5)
  • Stable (5)
  • Unstable (5)
Corner configuration
Corner Radius
Corner Radius
  • 0.0397 in (1)
  • 0.047 in (1)
  • 0.0476 in (1)
  • 0.063 in (1)
  • 0.079 in (1)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 1.0 mm (1)
  • 1.2 mm (2)
  • 1.6 mm (1)
  • 2.0 mm (1)
Corner Radius Min to Corner Radius Max
Application
Drilling Condition
Drilling Condition
  • Interrupted (5)
  • Stable (5)
  • Unstable (5)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 5 of 5 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [LI] Insert Length [LI] Insert Length [W] Insert Width [W] Insert Width [D1] Insert Hole Size [D1] Insert Hole Size [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius
5118457 DFC040310D28MD DFC040310D28MD KC7140 10.0000 .3937 7.6000 .2990 2.8500 .1122 3.1800 .1250 1.0000 .0397  
    List price:
    $20.40 /each.
    Your price::
    Qty
    5118458 DFC05T312D32MD DFC05T312D32MD KC7140 12.0000 .4724 9.4000 .3700 3.4000 .1339 3.7500 .1476 1.2000 .0476  
      List price:
      $20.40 /each.
      Your price::
      Qty
      5118459 DFC06T312D36MD DFC06T312D36MD KC7140 16.0000 .6300 12.4000 .4880 4.4000 .1730 3.7500 .1480 1.2000 .0470  
        List price:
        $23.05 /each.
        Your price::
        Qty
        5118460 DFC070416D45MD DFC070416D45MD KC7140 18.0000 .7087 14.5000 .5710 4.4000 .1732 4.7500 .1870 1.6000 .0630  
          List price:
          $27.64 /each.
          Your price::
          Qty
          5118461 DFC090520D56MD DFC090520D56MD KC7140   24.0000 .9449 19.0000 .7480 5.5000 .2165 5.2500 .2070 2.0000 .0790
            List price:
            $32.44 /each.
            Your price::
            Qty
            List price:
            Discount: %
            Your price::
            Replacement This item is not available
            Replacement Product This item may be available through a distributor
            Qty

            Sold in pkg. of

            Grades

            • KC7140

              Composition: PVD TiCN/TiN coated medium-grain carbide with high toughness.
              Application: Best suited for machining of steel and stainless steel. This exceptionally tough grade is perfectly suited for metastable machining conditions offering excellent tool life.

              P Steel
              S High-Temp Alloys
              K Cast Iron
              M Stainless Steel
              N Non-Ferrous
            product-image
            Please adjust the following properties from

            ISO Catalog Number

            ANSI Catalog Number

            to find similar products.
            You are about to create a duplicate . Do you want to proceed?
            You are about to delete Do you want to proceed?
            What would you like to rename your to?
            Please enter a valid name
            Please enter a name for the duplicate
            Please enter a valid name
            You are about to add to your My Solutions page. Do you want to proceed?
            Please enter a valid name
            Send a copy of

            Please enter a valid Email
            Please enter a valid name

            The following CAD files are available

            Please select a file to download

            You should be logged to see your dashboard information
            Session expired due to inactivity, please login again
            The product/s () you were trying to add to the cart is/are not available, please contact customer service.
            item(s) successfully added to the cart
            View Cart