HTS-C System
The HTS-C indexable inserts make are great for holemaking operations. The wide range of geometries can be used for easy cutting and of several materials. Inserts are securely positioned in fixed pockets for effortless cutting. Premium carbide grades and geometries ensure superior chip control and optimal performance. Solid carbide pilot drills are also available.
- P Steel (165)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(165)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(165)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(165)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(165)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(165)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(165)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(165)
- M Stainless Steel (164)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(164)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(164)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(164)
- K Cast Iron (178)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(178)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(178)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(178)
- N Non-Ferrous Materials (123)
- N1Wrought Aluminum (123)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(123)
- N3High-Silicon Aluminum Alloys Si >12.2%(119)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (123)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (123)
- N6Carbon, Graphite Composites, CFRP (123)
- N7MMC's (118)
- S High-Temp Alloys (154)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(154)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(154)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(154)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(154)
- H Hardened Materials (31)
- H1Hardened Materials 44-48 HRC(31)
- H2Hardened Materials 48-55 HRC(31)
- H3Hardened Materials 56-60 HRC(31)
- H4Hardened Materials >60 HRC(31)
- BR (21)
- CN (69)
- DE (69)
- GB (53)
- IN (29)
- SG (52)
- US (69)
Drilling (4)
- 0.1969 in(1)
- 0.2362 in(1)
- 0.315 in(1)
- 0.3937 in(1)
- 5.0 mm(1)
- 6.0 mm(1)
- 8.0 mm(1)
- 10.0 mm(1)
- Interrupted (53)
- Stable (130)
- Unstable (75)
- HTS-C Pilot Drill Shank (4)
- 2 (4)
- 2.0 (76)
- 4.0 (113)
- 1.2001 in(1)
- 1.4567 in(1)
- 1.752 in(1)
- 2.1457 in(1)
- 30.5 mm(1)
- 37.0 mm(1)
- 44.5 mm(1)
- 54.5 mm(1)
- 0.008 in(3)
- 0.012 in(1)
- 0.016 in(67)
- 0.024 in(4)
- 0.031 in(61)
- 0.039 in(17)
- 0.047 in(28)
- 0.063 in(5)
- 0.079 in(3)
- 0.2 mm(3)
- 0.3 mm(1)
- 0.4 mm(67)
- 0.6 mm(4)
- 0.8 mm(61)
- 1.0 mm(17)
- 1.2 mm(28)
- 1.6 mm(5)
- 2.0 mm(3)
- 0.0 mm(189)
- 0.0 in(189)
- Uncoated (4)
- AS3 (4)
- CS5 (1)
- KC7140 (20)
- KC720 (4)
- KC7215 (32)
- KCMS35 (8)
- KCPK10 (25)
- KCU25 (46)
- KCU40 (47)
- KM1 (6)
- R (4)
- N (189)
- 81-06 (4)
- S-SQUARE 90 (189)
- 118.0 (4)
- S-SQUARE 90 (189)
- 5.56 mm(6)
- 6.35 mm(27)
- 7.742 mm(1)
- 7.937 mm(16)
- 7.94 mm(24)
- 9.525 mm(44)
- 12.7 mm(42)
- 15.732 mm(20)
- 15.875 mm(9)
- 0.2188 in(6)
- 0.25 in(27)
- 0.3048 in(1)
- 0.3125 in(40)
- 0.375 in(44)
- 0.5 in(42)
- 0.625 in(29)
- 5.417 mm(6)
- 6.207 mm(10)
- 6.35 mm(17)
- 7.742 mm(1)
- 7.797 mm(15)
- 7.937 mm(25)
- 9.382 mm(20)
- 9.525 mm(24)
- 12.557 mm(14)
- 12.7 mm(37)
- 15.732 mm(20)
- 0.213 in(6)
- 0.244 in(10)
- 0.25 in(17)
- 0.3048 in(1)
- 0.307 in(15)
- 0.3125 in(25)
- 0.3694 in(20)
- 0.375 in(24)
- 0.4944 in(14)
- 0.5 in(37)
- 0.619 in(20)
- 20 (33)
- 21 (30)
- 22 (4)
- 31 (12)
- FP (27)
- HP (34)
- MD (37)
- MDT (3)
- H W (189)
- G (51)
- H (12)
- P (60)
- CYLINDRICAL (4)
- 5.0 mm(1)
- 6.0 mm(1)
- 8.0 mm(1)
- 10.0 mm(1)
- 0.1969 in(1)
- 0.2362 in(1)
- 0.315 in(1)
- 0.3937 in(1)