successfully added to cart
View Cart

Notifications

Mark all as read

KM4X100™ Cutting Units - KM4X100™ Cutting Units, Clamping Units & Adapters For Sale - Kennametal®

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (46)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (46)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (46)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (46)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (46)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (46)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (46)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (46)
  • M Stainless Steel (46)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (46)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (46)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (46)
  • K Cast Iron (46)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (46)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (46)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (46)
  • N Non-Ferrous Materials (39)
    • N1
      Wrought Aluminum
      (35)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (35)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (14)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (37)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (33)
    • N6
      Carbon, Graphite Composites, CFRP
      (30)
    • N7
      MMC's
      (31)
  • S High-Temp Alloys (46)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (46)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (46)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (46)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (46)
  • H Hardened Materials (29)
    • H1
      Hardened Materials 44-48 HRC
      (29)
    • H2
      Hardened Materials 48-55 HRC
      (25)
    • H3
      Hardened Materials 56-60 HRC
      (25)
    • H4
      Hardened Materials >60 HRC
      (20)
Applications
Applications
  • Chamfer Turning Chamfer Turning (13)
  • Deep Grooving Deep Grooving (8)
  • Facing Facing (39)
  • Grooving Grooving (8)
  • ID Facing ID Facing (21)
  • ID Grooving ID Grooving (8)
  • ID Thread Turning ID Thread Turning (8)
  • Multiple Direction Cutting Multiple Direction Cutting (40)
  • OD Thread Turning OD Thread Turning (8)
  • Plunge Turning Plunge Turning (11)
  • Profiling Profiling (30)
  • TRN Boring TRN Boring (29)
  • Turning Turning (40)
Type of Thread
Type of Thread
  • 60 (4)
  • ACME (6)
  • API (4)
  • API RD (4)
  • BSW (2)
  • BUTTRESS (4)
  • M (2)
  • NPT (2)
  • STUB ACME (2)
  • UN (4)
  • UNJ (2)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (44)
  • Interrupted (18)
  • Lightly Interrupted Cut (44)
  • Smooth Cut (44)
  • Varying Depth of Cut (44)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (2)
  • 75.0 (11)
  • 90.0 (17)
  • 93.0 (10)
  • 95.0 (8)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • KM (19)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (21)
  • 2.0 (34)
  • 3.0 (2)
  • 4.0 (27)
  • 6.0 (2)
  • 8.0 (23)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.002 in (2)
  • 0.003 in (4)
  • 0.004 in (10)
  • 0.005 in (2)
  • 0.006 in (4)
  • 0.007 in (4)
  • 0.008 in (8)
  • 0.01 in (4)
  • 0.011 in (2)
  • 0.012 in (2)
  • 0.014 in (10)
  • 0.016 in (14)
  • 0.017 in (2)
  • 0.019 in (4)
  • 0.02 in (2)
  • 0.023 in (6)
  • 0.031 in (24)
  • 0.033 in (4)
  • 0.035 in (4)
  • 0.039 in (2)
  • 0.047 in (24)
  • 0.049 in (2)
  • 0.06 in (2)
  • 0.062 in (4)
  • 0.063 in (31)
  • 0.069 in (2)
  • 0.078 in (2)
  • 0.079 in (4)
  • 0.089 in (4)
  • 0.094 in (9)
  • 0.095 in (25)
  • 0.098 in (2)
  • 0.125 in (2)
  • 0.126 in (11)
  • 0.157 in (4)
  • 0.197 in (3)
  • 0.237 in (3)
  • 0.25 in (2)
  • 0.375 in (2)
  • 0.394 in (1)
  • 0.492 in (1)
  • 0.5 in (2)
  • 0.63 in (1)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (2)
  • 0.076 mm (4)
  • 0.1 mm (10)
  • 0.125 mm (2)
  • 0.151 mm (4)
  • 0.176 mm (4)
  • 0.2 mm (8)
  • 0.225 mm (2)
  • 0.25 mm (4)
  • 0.275 mm (2)
  • 0.301 mm (2)
  • 0.325 mm (6)
  • 0.351 mm (8)
  • 0.4 mm (14)
  • 0.426 mm (2)
  • 0.45 mm (4)
  • 0.476 mm (1)
  • 0.5 mm (2)
  • 0.576 mm (6)
  • 0.775 mm (2)
  • 0.8 mm (22)
  • 0.826 mm (4)
  • 0.9 mm (4)
  • 1.0 mm (2)
  • 1.201 mm (24)
  • 1.25 mm (2)
  • 1.5 mm (2)
  • 1.576 mm (4)
  • 1.6 mm (31)
  • 1.75 mm (2)
  • 1.975 mm (2)
  • 2.0 mm (4)
  • 2.25 mm (4)
  • 2.375 mm (9)
  • 2.401 mm (25)
  • 2.5 mm (2)
  • 3.176 mm (2)
  • 3.2 mm (11)
  • 4.0 mm (4)
  • 5.0 mm (3)
  • 6.0 mm (3)
  • 6.351 mm (2)
  • 9.525 mm (2)
  • 10.0 mm (1)
  • 12.5 mm (1)
  • 12.701 mm (2)
  • 16.0 mm (1)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • CPX (19)
  • K090 (26)
  • K10M (20)
  • K10P (18)
  • K20K (22)
  • K25P (20)
  • K313 (29)
  • K420 (31)
  • K68 (37)
  • KC250 (18)
  • KC5010 (40)
  • KC5025 (30)
  • KC5410 (26)
  • KC5510 (22)
  • KC730 (25)
  • KC7310 (20)
  • KC8050 (36)
  • KC810 (33)
  • KC850 (44)
  • KC9010 (21)
  • KC9025 (33)
  • KC910 (28)
  • KC9110 (41)
  • KC9120 (35)
  • KC9125 (37)
  • KC9140 (35)
  • KC9145 (33)
  • KC9215 (20)
  • KC9225 (22)
  • KC9240 (31)
  • KC9240NEW (27)
  • KC9245 (22)
  • KC9315 (29)
  • KC9320 (26)
  • KC9325 (28)
  • KC935 (34)
  • KC950 (33)
  • KC990 (29)
  • KCK05 (22)
  • KCK05B (20)
  • KCK15 (24)
  • KCK15B (25)
  • KCK20 (29)
  • KCK20B (33)
  • KCM15 (22)
  • KCM15B (18)
  • KCM25 (26)
  • KCM25B (25)
  • KCM35 (22)
  • KCM35B (18)
  • KCP10 (37)
  • KCP10B (32)
  • KCP25 (37)
  • KCP25B (39)
  • KCP30 (36)
  • KCP30B (27)
  • KCP40 (31)
  • KCP40B (31)
  • KCPK05 (21)
  • KCS10B (22)
  • KCU10 (40)
  • KCU25 (30)
  • KU30T (28)
  • KY1615 (21)
  • KY3000 (26)
  • KY3500 (20)
  • KY4400 (18)
  • KYHK15B (18)
  • KYK35 (20)
  • NL250 (22)
  • NL300 (28)
  • SP0819 (18)
  • SP3019 (18)
  • THM (18)
  • TN10P (23)
  • TN15M (20)
  • TN20K (24)
  • TN20P (26)
  • TN30M (20)
  • TN30P (24)
  • TN5015 (18)
  • TN5020 (18)
  • TN7015 (27)
  • TN7025 (27)
  • TN7035 (20)
  • TN7115 (25)
  • TN7125 (27)
  • TN7135 (20)
  • TN8025 (25)
  • WK05CT (22)
  • WK20CT (26)
  • WM15CT (22)
  • WM25CT (25)
  • WM35CT (22)
  • WP15CT (33)
  • WP25CT (33)
  • WP35CT (33)
  • WS10PT (20)
  • WS25PT (22)
  • WU10HT (19)
Hand Of Tool
Hand Of Tool
  • L (7)
  • N (5)
  • R (7)
Wiper Insert
Wiper Insert
  • N (46)
  • Y (16)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 120.0 mm (29)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 4.724 in (29)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (7)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (7)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (3)
  • S (16)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (14)
  • NEGATIVE-ZERO (2)
Maximum Bore Depth
Maximum Bore Depth
  • 3.938 in (29)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 100.0 mm (29)
Maximum Bore Depth Min to Maximum Bore Depth Max
Front-End
Adapter Front-End
Adapter Front-End
  • CARTRIDGE MOUNT (4)
  • SQUARE SHANK ADAPTER (9)
Clamp Style
Clamp Style
  • D (8)
  • M (29)
  • N (8)
  • X (3)
Cutting Width
Cutting Width
  • 0.039 in (2)
  • 0.047 in (2)
  • 0.06 in (2)
  • 0.062 in (2)
  • 0.069 in (2)
  • 0.073 in (2)
  • 0.078 in (2)
  • 0.079 in (2)
  • 0.088 in (2)
  • 0.089 in (2)
  • 0.095 in (2)
  • 0.097 in (2)
  • 0.098 in (2)
  • 0.105 in (2)
  • 0.108 in (2)
  • 0.11 in (2)
  • 0.119 in (4)
  • 0.122 in (2)
  • 0.125 in (4)
  • 0.126 in (4)
  • 0.128 in (2)
  • 0.131 in (1)
  • 0.138 in (4)
  • 0.143 in (2)
  • 0.156 in (2)
  • 0.157 in (4)
  • 0.167 in (4)
  • 0.169 in (2)
  • 0.177 in (4)
  • 0.178 in (2)
  • 0.181 in (1)
  • 0.185 in (3)
  • 0.188 in (4)
  • 0.189 in (4)
  • 0.192 in (1)
  • 0.193 in (1)
  • 0.195 in (2)
  • 0.197 in (4)
  • 0.202 in (2)
  • 0.213 in (2)
  • 0.217 in (2)
  • 0.218 in (2)
  • 0.219 in (2)
  • 0.237 in (4)
  • 0.25 in (6)
  • 0.255 in (2)
  • 0.276 in (2)
  • 0.281 in (4)
  • 0.312 in (4)
  • 0.315 in (1)
  • 0.345 in (2)
  • 0.354 in (2)
  • 0.375 in (4)
  • 0.38 in (2)
  • 0.383 in (2)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 1.0 mm (2)
  • 1.201 mm (2)
  • 1.5 mm (2)
  • 1.576 mm (2)
  • 1.75 mm (2)
  • 1.826 mm (2)
  • 1.975 mm (2)
  • 2.0 mm (2)
  • 2.2 mm (2)
  • 2.225 mm (2)
  • 2.25 mm (2)
  • 2.401 mm (2)
  • 2.475 mm (2)
  • 2.5 mm (2)
  • 2.676 mm (2)
  • 2.75 mm (2)
  • 2.801 mm (2)
  • 3.0 mm (4)
  • 3.1 mm (2)
  • 3.176 mm (4)
  • 3.2 mm (4)
  • 3.25 mm (2)
  • 3.325 mm (1)
  • 3.5 mm (4)
  • 3.6 mm (2)
  • 3.95 mm (2)
  • 3.975 mm (1)
  • 4.0 mm (4)
  • 4.25 mm (4)
  • 4.3 mm (2)
  • 4.5 mm (4)
  • 4.525 mm (2)
  • 4.601 mm (1)
  • 4.7 mm (3)
  • 4.775 mm (4)
  • 4.801 mm (4)
  • 4.875 mm (1)
  • 4.9 mm (1)
  • 4.95 mm (2)
  • 5.0 mm (4)
  • 5.125 mm (2)
  • 5.4 mm (2)
  • 5.5 mm (2)
  • 5.525 mm (2)
  • 5.575 mm (2)
  • 6.0 mm (4)
  • 6.351 mm (6)
  • 6.476 mm (2)
  • 7.0 mm (2)
  • 7.125 mm (4)
  • 7.926 mm (4)
  • 8.0 mm (1)
  • 8.75 mm (2)
  • 9.0 mm (2)
  • 9.525 mm (4)
  • 9.65 mm (2)
  • 9.726 mm (2)
Cutting Width Min to Cutting Width Max
Front End Type
Front End Type
  • MCS - Modular Cartridge System (4)
  • VKT - Square Shank (9)
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (14)
  • D-DIAMOND/RHOMBIC 55 (4)
  • R-ROUND (9)
  • S-SQUARE 90 (7)
  • T-TRIANGLE 60 (4)
  • TN-TOP NOTCH (8)
  • V-DIAMOND/RHOMBIC 35 (2)
Front End Style
Front End Style
  • MCS01 Modular Deep Grooving (4)
  • VKT01 Std Design (9)
Insert Size
Insert Size
  • 3 (2)
  • 4 (2)
  • 5 (2)
  • 6 (2)
Maximum Cutting Depth
Maximum Cutting Depth
  • 1.581 in (1)
  • 1.974 in (1)
  • 2.368 in (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 40.151 mm (1)
  • 50.151 mm (1)
  • 60.151 mm (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Gage Length
Gage Length
  • 2.071 in (3)
  • 2.165 in (4)
  • 3.003 in (2)
  • 3.426 in (2)
  • 3.484 in (2)
Gage Length
Gage Length
  • 55 mm (4)
  • 87 mm (2)
  • 52.6 mm (3)
  • 76.25 mm (2)
  • 88.5 mm (2)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • B H (14)
  • B L (10)
  • C A (27)
  • C N (26)
  • D P (11)
  • H T (13)
  • H W (46)
Back-End
Connection Type
Connection Type
  • TAPER SHANK (19)
System Size
System Size
  • KM4X100 (32)
Back-End Diameter
Back-End Diameter
  • 100.0 mm (48)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 3.938 in (48)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Threading

Top Notch™ Threading and Grooving • KM4X™ Cutting Units
(8 Products)
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
  • ThreadingThreading
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
5337754 KM4X100NEL3 KM4X100NEL3 100.0000 3.937 63.0000 2.480 120.0000 4.724 NG3R 4.45 9.80
    List price:
    $567.52 /each.
    Your price::
    Qty
    5337755 KM4X100NEL4 KM4X100NEL4 100.0000 3.937 63.0000 2.480 120.0000 4.724 NG4R 4.51 9.93
      List price:
      $567.52 /each.
      Your price::
      Qty
      5337756 KM4X100NEL5 KM4X100NEL5 100.0000 3.937 63.0000 2.480 120.0000 4.724 NG5R 4.65 10.25
        List price:
        $567.52 /each.
        Your price::
        Qty
        5337757 KM4X100NEL6 KM4X100NEL6 100.0000 3.937 63.0000 2.480 120.0000 4.724 NG6R 4.48 9.88
          List price:
          $567.52 /each.
          Your price::
          Qty
          5337758 KM4X100NER3 KM4X100NER3 100.0000 3.937 63.0000 2.480 120.0000 4.724 NG3L 4.45 9.80
            List price:
            $567.52 /each.
            Your price::
            Qty
            5337759 KM4X100NER4 KM4X100NER4 100.0000 3.937 63.0000 2.480 120.0000 4.724 NG4L 4.51 9.93
              List price:
              $567.52 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is no longer available
              Replacement Product Please contact customer service for assistance
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              KM4X™ 100 Cutting Units

              P-Clamping
              (3 Products)
              • Shank: KM4X™Shank: KM4X™
              • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
              • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [CD] Cutting Depth [CD] Cutting Depth Gage Insert Weight Kilograms Weight Pounds
              5337750 KM4X100PRDCN20 KM4X100PRDCN20 100.0000 3.937 10.0000 .3940 40.1500 1.581 RCMT2006M0 3.63 8.00
                List price:
                $608.05 /each.
                Your price::
                Qty
                5337751 KM4X100PRDCN25 KM4X100PRDCN25 100.0000 3.937 12.5000 .4920 50.1500 1.975 RCMT2507M0RP 3.31 7.29
                  List price:
                  $608.05 /each.
                  Your price::
                  Qty
                  5337752 KM4X100PRDCN32 KM4X100PRDCN32 110.0000 4.331 16.0000 .6300 60.1500 2.368 RCMX3209M0RP 3.50 7.93
                    List price:
                    $608.05 /each.
                    Your price::
                    Qty
                    List price:
                    Discount: %
                    Your price::
                    Replacement This item is no longer available
                    Replacement Product Please contact customer service for assistance
                    Qty

                    Sold in pkg. of

                    ORIGINAL PRODUCT

                    KM4X™ 100 Cutting Units

                    M-Clamping
                    (4 Products)
                    • Shank: KM4X™Shank: KM4X™
                    • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                    • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                    View Products
                    SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                    5337713 KM4X100MSRNL19 KM4X100MSRNL19 100.0000 3.937 58.0000 2.283 SN..190612/SN..643 4.44 9.78
                      List price:
                      $590.22 /each.
                      Your price::
                      Qty
                      5337714 KM4X100MSRNL25 KM4X100MSRNL25 100.0000 3.937 58.0000 2.283 SN..250924/SN..866 4.41 9.73
                        List price:
                        $590.22 /each.
                        Your price::
                        Qty
                        5337715 KM4X100MSRNR19 KM4X100MSRNR19 100.0000 3.937 58.0000 2.283 SN..190612/SN..643 4.47 9.85
                          List price:
                          $590.22 /each.
                          Your price::
                          Qty
                          5337716 KM4X100MSRNR25 KM4X100MSRNR25 100.0000 3.937 58.0000 2.283 SN..250924/SN..856 4.46 9.83
                            List price:
                            $590.22 /each.
                            Your price::
                            Qty
                            List price:
                            Discount: %
                            Your price::
                            Replacement This item is no longer available
                            Replacement Product Please contact customer service for assistance
                            Qty

                            Sold in pkg. of

                            ORIGINAL PRODUCT

                            KM4X™ 100 Cutting Units

                            M-Clamping
                            (1 Products)
                            • Shank: KM4X™Shank: KM4X™
                            • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                            • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                            View Products
                            SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                            5337711 KM4X100MSKNR19 KM4X100MSKNR19 100.0000 3.937 63.0000 2.480 120.0000 4.724 SN..190612/SN..643 4.59 10.12
                              List price:
                              $590.22 /each.
                              Your price::
                              Qty
                              List price:
                              Discount: %
                              Your price::
                              Replacement This item is no longer available
                              Replacement Product Please contact customer service for assistance
                              Qty

                              Sold in pkg. of

                              ORIGINAL PRODUCT

                              KM4X™ 100 Cutting Units

                              M-Clamping
                              (2 Products)
                              • Shank: KM4X™Shank: KM4X™
                              • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                              • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                              View Products
                              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                              5337731 KM4X100MVUNL16 KM4X100MVUNL16 100.0000 3.937 63.0000 2.480 120.0000 4.724 VN..160408/VN..332 4.90 10.81
                                List price:
                                $590.22 /each.
                                Your price::
                                Qty
                                5337732 KM4X100MVUNR16 KM4X100MVUNR16 100.0000 3.937 63.0000 2.480 120.0000 4.724 VN..160408/VN..332 4.57 10.08