successfully added to cart
View Cart

Notifications

Mark all as read

PSC 63 Cutting Units

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (88)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (88)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (88)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (88)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (88)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (88)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (88)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (88)
  • M Stainless Steel (88)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (88)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (88)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (88)
  • K Cast Iron (88)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (88)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (88)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (88)
  • N Non-Ferrous Materials (88)
    • N1
      Wrought Aluminum
      (88)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (88)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (53)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (85)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (86)
    • N6
      Carbon, Graphite Composites, CFRP
      (82)
    • N7
      MMC's
      (83)
  • S High-Temp Alloys (88)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (88)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (88)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (88)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (88)
  • H Hardened Materials (77)
    • H1
      Hardened Materials 44-48 HRC
      (77)
    • H2
      Hardened Materials 48-55 HRC
      (71)
    • H3
      Hardened Materials 56-60 HRC
      (69)
    • H4
      Hardened Materials >60 HRC
      (63)
Applications
Applications
  • Facing Facing (73)
  • ID Facing ID Facing (48)
  • Multiple Direction Cutting Multiple Direction Cutting (77)
  • OD Thread Turning OD Thread Turning (3)
  • Profiling Profiling (12)
  • TRN Boring TRN Boring (48)
  • Turning Turning (73)
Type of Thread
Type of Thread
  • 55 (6)
  • 60 (14)
  • ACME (14)
  • API (10)
  • API BUTTRESS (2)
  • API RD (8)
  • BSPT (4)
  • BSW (10)
  • BUTTRESS (8)
  • M (10)
  • NPT (8)
  • NPTF (4)
  • RD DIN 405 (6)
  • STUB ACME (10)
  • TR DIN 103 (6)
  • UN (12)
  • UNJ (8)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (80)
  • Interrupted (53)
  • Lightly Interrupted Cut (80)
  • Smooth Cut (80)
  • Varying Depth of Cut (80)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (6)
  • 62.5 (2)
  • 72.5 (2)
  • 75.0 (10)
  • 90.0 (23)
  • 93.0 (21)
  • 95.0 (20)
  • 107.5 (6)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • PSC (39)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (61)
  • 2.0 (61)
  • 3.0 (10)
  • 4.0 (54)
  • 6.0 (4)
  • 8.0 (34)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.001 in (3)
  • 0.002 in (15)
  • 0.003 in (12)
  • 0.004 in (48)
  • 0.005 in (5)
  • 0.006 in (11)
  • 0.007 in (9)
  • 0.008 in (45)
  • 0.01 in (9)
  • 0.011 in (6)
  • 0.012 in (5)
  • 0.014 in (20)
  • 0.015 in (1)
  • 0.016 in (56)
  • 0.017 in (6)
  • 0.019 in (8)
  • 0.02 in (4)
  • 0.021 in (2)
  • 0.023 in (8)
  • 0.024 in (4)
  • 0.028 in (1)
  • 0.03 in (1)
  • 0.031 in (71)
  • 0.035 in (8)
  • 0.037 in (1)
  • 0.039 in (5)
  • 0.047 in (71)
  • 0.049 in (4)
  • 0.06 in (5)
  • 0.062 in (12)
  • 0.063 in (63)
  • 0.069 in (4)
  • 0.078 in (4)
  • 0.079 in (8)
  • 0.089 in (8)
  • 0.094 in (14)
  • 0.095 in (31)
  • 0.098 in (4)
  • 0.125 in (4)
  • 0.126 in (15)
  • 0.157 in (8)
  • 0.197 in (7)
  • 0.237 in (7)
  • 0.313 in (2)
  • 0.315 in (2)
  • 0.394 in (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.025 mm (3)
  • 0.05 mm (15)
  • 0.076 mm (12)
  • 0.1 mm (48)
  • 0.125 mm (5)
  • 0.151 mm (11)
  • 0.176 mm (9)
  • 0.2 mm (45)
  • 0.225 mm (5)
  • 0.25 mm (9)
  • 0.275 mm (6)
  • 0.301 mm (5)
  • 0.325 mm (9)
  • 0.351 mm (19)
  • 0.375 mm (1)
  • 0.4 mm (56)
  • 0.426 mm (6)
  • 0.45 mm (8)
  • 0.476 mm (2)
  • 0.5 mm (4)
  • 0.525 mm (2)
  • 0.576 mm (8)
  • 0.601 mm (4)
  • 0.701 mm (1)
  • 0.75 mm (1)
  • 0.775 mm (4)
  • 0.8 mm (67)
  • 0.9 mm (8)
  • 0.925 mm (1)
  • 1.0 mm (5)
  • 1.201 mm (71)
  • 1.25 mm (4)
  • 1.5 mm (4)
  • 1.526 mm (1)
  • 1.576 mm (12)
  • 1.6 mm (63)
  • 1.75 mm (4)
  • 1.975 mm (4)
  • 2.0 mm (8)
  • 2.25 mm (8)
  • 2.375 mm (14)
  • 2.401 mm (31)
  • 2.5 mm (4)
  • 3.176 mm (4)
  • 3.2 mm (15)
  • 4.0 mm (8)
  • 5.0 mm (7)
  • 6.0 mm (7)
  • 7.95 mm (2)
  • 8.0 mm (2)
  • 10.0 mm (2)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • CPX (52)
  • K090 (52)
  • K10M (63)
  • K20K (59)
  • K25P (54)
  • K313 (80)
  • K420 (53)
  • K68 (76)
  • KC5010 (86)
  • KC5025 (86)
  • KC5410 (76)
  • KC5510 (57)
  • KC720 (61)
  • KC730 (73)
  • KC7310 (59)
  • KC8050 (74)
  • KC810 (80)
  • KC850 (80)
  • KC9010 (59)
  • KC9025 (69)
  • KC910 (73)
  • KC9105 (59)
  • KC9110 (81)
  • KC9120 (67)
  • KC9125 (73)
  • KC9140 (57)
  • KC9145 (56)
  • KC9215 (57)
  • KC9225 (67)
  • KC9240 (70)
  • KC9240NEW (70)
  • KC9245 (57)
  • KC9315 (74)
  • KC9320 (76)
  • KC9325 (60)
  • KC935 (75)
  • KC950 (73)
  • KC990 (59)
  • KCK05 (67)
  • KCK05B (63)
  • KCK15 (69)
  • KCK15B (74)
  • KCK20 (78)
  • KCK20B (78)
  • KCM15 (65)
  • KCM15B (59)
  • KCM25 (72)
  • KCM25B (67)
  • KCM35 (64)
  • KCP05 (52)
  • KCP10 (73)
  • KCP10B (81)
  • KCP25 (74)
  • KCP25B (81)
  • KCP30 (70)
  • KCP30B (58)
  • KCP40 (53)
  • KCP40B (58)
  • KCPK05 (63)
  • KCS10B (72)
  • KCU10 (82)
  • KCU25 (82)
  • KT315 (53)
  • KU10T (51)
  • KU30T (73)
  • KY3000 (60)
  • KY3500 (56)
  • KYK35 (56)
  • NL250 (59)
  • SP0819 (52)
  • SP3019 (52)
  • TN10P (62)
  • TN15M (63)
  • TN20K (64)
  • TN20P (65)
  • TN30M (64)
  • TN30P (53)
  • TN5015 (60)
  • TN5020 (57)
  • TN5120 (66)
  • TN7010 (65)
  • TN7015 (65)
  • TN7025 (65)
  • TN7035 (57)
  • TN7110 (66)
  • TN7115 (66)
  • TN7125 (60)
  • TN7135 (59)
  • TN8025 (56)
  • WK05CT (60)
  • WK20CT (70)
  • WM15CT (65)
  • WM25CT (65)
  • WM35CT (57)
  • WP15CT (70)
  • WP25CT (70)
  • WP35CT (70)
  • WS10PT (59)
  • WS25PT (59)
  • WU10HT (61)
Hand Of Tool
Hand Of Tool
  • L (15)
  • N (8)
  • R (16)
Wiper Insert
Wiper Insert
  • N (88)
  • Y (41)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (4)
  • 41.301 mm (2)
  • 47.6 mm (2)
  • 57.2 mm (2)
  • 81.0 mm (3)
  • 88.9 mm (2)
  • 90.0 mm (7)
  • 110.0 mm (31)
  • 125.0 mm (14)
  • 139.701 mm (2)
  • 174.601 mm (2)
  • 209.601 mm (2)
  • 215.0 mm (2)
  • 222.3 mm (2)
  • 510.0 mm (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (4)
  • 1.627 in (2)
  • 1.874 in (2)
  • 2.253 in (2)
  • 3.189 in (3)
  • 3.5 in (2)
  • 3.543 in (7)
  • 4.331 in (31)
  • 4.921 in (14)
  • 5.5 in (2)
  • 6.875 in (2)
  • 8.252 in (2)
  • 8.465 in (2)
  • 8.752 in (2)
  • 20.079 in (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (8)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (8)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (2)
  • E (16)
  • S (21)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (14)
  • NEGATIVE-ZERO (5)
  • NEUTRAL (ZERO) (18)
Maximum Bore Depth
Maximum Bore Depth
  • 2.047 in (2)
  • 2.126 in (1)
  • 2.205 in (1)
  • 2.559 in (48)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 52.0 mm (2)
  • 54.0 mm (1)
  • 56.0 mm (1)
  • 65.0 mm (48)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (6)
Front-End
Clamp Style
Clamp Style
  • D (48)
  • N (10)
  • P (23)
  • S (9)
Cutting Width
Cutting Width
  • 0.039 in (4)
  • 0.047 in (4)
  • 0.06 in (4)
  • 0.062 in (4)
  • 0.069 in (4)
  • 0.073 in (4)
  • 0.078 in (4)
  • 0.079 in (4)
  • 0.088 in (4)
  • 0.089 in (4)
  • 0.095 in (4)
  • 0.097 in (4)
  • 0.098 in (4)
  • 0.105 in (4)
  • 0.108 in (4)
  • 0.11 in (4)
  • 0.119 in (8)
  • 0.122 in (4)
  • 0.125 in (8)
  • 0.126 in (8)
  • 0.128 in (4)
  • 0.131 in (2)
  • 0.138 in (8)
  • 0.143 in (4)
  • 0.156 in (4)
  • 0.157 in (8)
  • 0.167 in (8)
  • 0.169 in (4)
  • 0.177 in (8)
  • 0.178 in (4)
  • 0.181 in (2)
  • 0.185 in (6)
  • 0.188 in (8)
  • 0.189 in (8)
  • 0.192 in (2)
  • 0.193 in (2)
  • 0.195 in (4)
  • 0.197 in (4)
  • 0.202 in (4)
  • 0.213 in (4)
  • 0.217 in (4)
  • 0.219 in (4)
  • 0.237 in (4)
  • 0.25 in (4)
  • 0.255 in (4)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 1.0 mm (4)
  • 1.201 mm (4)
  • 1.5 mm (4)
  • 1.576 mm (4)
  • 1.75 mm (4)
  • 1.826 mm (4)
  • 1.975 mm (4)
  • 2.0 mm (4)
  • 2.2 mm (4)
  • 2.225 mm (4)
  • 2.25 mm (4)
  • 2.401 mm (4)
  • 2.475 mm (4)
  • 2.5 mm (4)
  • 2.676 mm (4)
  • 2.75 mm (4)
  • 2.801 mm (4)
  • 3.0 mm (8)
  • 3.1 mm (4)
  • 3.176 mm (8)
  • 3.2 mm (8)
  • 3.25 mm (4)
  • 3.325 mm (2)
  • 3.5 mm (8)
  • 3.6 mm (4)
  • 3.95 mm (4)
  • 3.975 mm (2)
  • 4.0 mm (8)
  • 4.25 mm (8)
  • 4.3 mm (4)
  • 4.5 mm (8)
  • 4.525 mm (4)
  • 4.601 mm (2)
  • 4.7 mm (6)
  • 4.775 mm (8)
  • 4.801 mm (8)
  • 4.875 mm (2)
  • 4.9 mm (2)
  • 4.95 mm (4)
  • 5.0 mm (4)
  • 5.125 mm (4)
  • 5.4 mm (4)
  • 5.5 mm (4)
  • 5.575 mm (4)
  • 6.0 mm (4)
  • 6.351 mm (4)
  • 6.476 mm (4)
Cutting Width Min to Cutting Width Max
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (24)
  • D-DIAMOND/RHOMBIC 55 (19)
  • LT-TRIANGLE LAY DOWN THREAD 60 (6)
  • R-ROUND (9)
  • S-SQUARE 90 (10)
  • TN-TOP NOTCH (8)
  • V-DIAMOND/RHOMBIC 35 (10)
  • W-TRIGON 80 (4)
Insert Size
Insert Size
  • 3 (4)
  • 4 (4)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.21 in (4)
  • 0.294 in (4)
  • 0.984 in (1)
  • 1.102 in (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 5.325 mm (4)
  • 7.476 mm (4)
  • 25.0 mm (1)
  • 28.0 mm (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • B H (53)
  • B L (48)
  • C A (62)
  • C N (64)
  • D P (49)
  • H T (60)
  • H W (88)
Back-End
Connection Type
Connection Type
  • TAPER SHANK (39)
System Size
System Size
  • PSC63 (37)
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

PSC63

Cutting Units • Threading and Grooving
(4 Products)
  • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
  • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
  • Shank - PSCShank - PSC
  • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
4092486 PSC63NEL3 PSC63NEL3 65.0000 2.559 45.0000 1.771 90.0000 3.543 NG3R 1.43
    List price:
    $590.16 /each.
    Your price::
    Qty
    4092488 PSC63NEL4 PSC63NEL4 65.0000 2.559 45.0000 1.771 90.0000 3.543 NG4R 1.42
      List price:
      $680.51 /each.
      Your price::
      Qty
      4092485 PSC63NER3 PSC63NER3 65.0000 2.559 45.0000 1.771 90.0000 3.543 NG3L 1.43
        List price:
        $504.52 /each.
        Your price::
        Qty
        4092487 PSC63NER4 PSC63NER4 65.0000 2.559 45.0000 1.771 90.0000 3.543 NG4L 1.42
          List price:
          $684.80 /each.
          Your price::
          Qty
          List price:
          Discount: %
          Your price::
          Replacement This item is no longer available
          Replacement Product Please contact customer service for assistance
          Qty

          Sold in pkg. of

          ORIGINAL PRODUCT

          PSC63

          Cutting Units • Threading and Grooving
          (4 Products)
          • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
          • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
          • Shank - PSCShank - PSC
          • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms
          4092490 PSC63NSL3 PSC63NSL3 65.0000 2.559 45.0000 1.771 NG3L 1.31
            List price:
            $504.52 /each.
            Your price::
            Qty
            4092492 PSC63NSL4 PSC63NSL4 65.0000 2.559 45.0000 1.771 NG4L 1.30
              List price:
              $576.23 /each.
              Your price::
              Qty
              4092489 PSC63NSR3 PSC63NSR3 65.0000 2.559 45.0000 1.771 NG3R 1.31
                List price:
                $504.52 /each.
                Your price::
                Qty
                4092491 PSC63NSR4 PSC63NSR4 65.0000 2.559 45.0000 1.771 NG4R 1.30
                  List price:
                  $648.93 /each.
                  Your price::
                  Qty
                  List price:
                  Discount: %
                  Your price::
                  Replacement This item is no longer available
                  Replacement Product Please contact customer service for assistance
                  Qty

                  Sold in pkg. of

                  ORIGINAL PRODUCT

                  PSC63

                  Cutting Units • Laydown Threading
                  (2 Products)
                  • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
                  • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
                  • Shank - PSCShank - PSC
                  • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
                  View Products
                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
                  4100716 PSC63LSEL16N PSC63LSEL16N 65.0000 2.559 45.0000 1.771 90.0000 3.543 LT16NL 1.50
                    List price:
                    $440.30 /each.
                    Your price::
                    Qty
                    4100715 PSC63LSER16N PSC63LSER16N 65.0000 2.559 45.0000 1.771 90.0000 3.543 LT16NR 1.50
                      List price:
                      $440.30 /each.
                      Your price::
                      Qty
                      List price:
                      Discount: %
                      Your price::
                      Replacement This item is no longer available
                      Replacement Product Please contact customer service for assistance
                      Qty

                      Sold in pkg. of

                      ORIGINAL PRODUCT

                      PSC63

                      Cutting Units • S-Clamping
                      (2 Products)
                      • Shank - PSCShank - PSC
                      • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
                      • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
                      View Products
                      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [CD] Cutting Depth [CD] Cutting Depth Gage Insert Weight Kilograms
                      6341556 PSC63SRDCN10 PSC63SRDCN10 65.0000 2.559 5.0000 .1969 25.0000 .9843 RCMT10T3M0 1.15
                        List price:
                        $401.88 /each.
                        Your price::
                        Qty
                        6341557 PSC63SRDCN12 PSC63SRDCN12 65.0000 2.559 6.0000 .2362 28.0000 1.102 RCMT1204M0 1.14
                          List price:
                          $401.88 /each.
                          Your price::
                          Qty
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is no longer available
                          Replacement Product Please contact customer service for assistance
                          Qty

                          Sold in pkg. of

                          ORIGINAL PRODUCT

                          PSC63

                          Cutting Units • Laydown Threading
                          (4 Products)
                          • Shank - PSCShank - PSC
                          • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
                          • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms
                          4100720 PSC63LSSL16 PSC63LSSL16 65.0000 2.559 45.0000 1.771 LT16EL 1.50
                            List price:
                            $423.37 /each.
                            Your price::
                            Qty
                            6341536 PSC63LSSL22 PSC63LSSL22 65.0000 2.559 45.0000 1.771 LT22EL 1.76
                              List price:
                              $454.52 /each.
                              Your price::
                              Qty
                              6341537 PSC63LSSR16 PSC63LSSR16 65.0000 2.559 45.0000 1.771 LT16ER 1.81
                                List price:
                                $454.52 /each.
                                Your price::
                                Qty
                                6341538 PSC63LSSR22 PSC63LSSR22 65.0000 2.559