Beyond™ Evolution™ Inserts

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (153)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(153)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(153)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(153)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(153)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(153)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(153)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(153)
    • M Stainless Steel (105)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(105)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(105)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(105)
    • K Cast Iron (153)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(153)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(153)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(153)
    • N Non-Ferrous Materials (114)
      • N1
        Wrought Aluminum (114)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(105)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (114)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (105)
      • N6
        Carbon, Graphite Composites, CFRP (105)
    • S High-Temp Alloys (114)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(114)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(114)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(114)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(114)
    • H Hardened Materials (68)
      • H1
        Hardened Materials 44-48 HRC(68)
      • H2
        Hardened Materials 48-55 HRC(68)
    Select First Choice
    • CN (21)
    • DE (21)
    • GB (12)
    • IN (3)
    • SG (13)
    • US (21)
    Applications
    Applications
    • Back BoringBack Boring (162)
    • BoringBoring (162)
    • Cut-OffCut-Off (23)
    • Face GroovingFace Grooving (162)
    • FacingFacing (162)
    • GroovingGrooving (162)
    • ID FacingID Facing (162)
    • ID GroovingID Grooving (162)
    • Plunge TurningPlunge Turning (126)
    • ProfilingProfiling (159)
    • TurningTurning (162)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (47)
    • Lightly Interrupted Cut (127)
    • Smooth Cut (162)
    • Varying Depth of Cut (129)
    Corner configuration
    Corner Radius
    Corner Radius
    • 0.008 in(1)
    • 0.031 in(1)
    • 0.039 in(3)
    • 0.041 in(9)
    • 0.047 in(6)
    • 0.06 in(4)
    • 0.061 in(11)
    • 0.063 in(8)
    • 0.065 in(9)
    • 0.079 in(4)
    • 0.081 in(11)
    • 0.094 in(8)
    • 0.096 in(10)
    • 0.098 in(4)
    • 0.1 in(11)
    • 0.119 in(4)
    • 0.12 in(11)
    • 0.125 in(10)
    • 0.128 in(6)
    • 0.156 in(9)
    • 0.157 in(4)
    • 0.158 in(7)
    • 0.159 in(11)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.2 mm(1)
    • 0.8 mm(1)
    • 1.0 mm(3)
    • 1.05 mm(9)
    • 1.201 mm(6)
    • 1.5 mm(4)
    • 1.55 mm(11)
    • 1.6 mm(8)
    • 1.651 mm(9)
    • 2.0 mm(4)
    • 2.051 mm(11)
    • 2.375 mm(8)
    • 2.45 mm(10)
    • 2.5 mm(4)
    • 2.551 mm(11)
    • 3.0 mm(4)
    • 3.051 mm(11)
    • 3.176 mm(10)
    • 3.25 mm(6)
    • 3.95 mm(9)
    • 4.0 mm(4)
    • 4.025 mm(7)
    • 4.05 mm(11)
    Corner Radius MintoCorner Radius Max
    Application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K313 (9)
    • KCK20B (9)
    • KCP10B (17)
    • KCP25B (22)
    • KCU10 (34)
    • KCU10B (34)
    • KCU25 (37)
    Countersunk Angle
    Countersunk Angle
    • 17.5 (2)
    Countersunk Angle MintoCountersunk Angle Max
    Front-End
    Cutting Width
    Cutting Width
    • 0.079 in(3)
    • 0.084 in(9)
    • 0.094 in(6)
    • 0.119 in(4)
    • 0.123 in(11)
    • 0.125 in(8)
    • 0.13 in(9)
    • 0.157 in(4)
    • 0.161 in(1)
    • 0.162 in(11)
    • 0.187 in(8)
    • 0.192 in(10)
    • 0.197 in(4)
    • 0.202 in(11)
    • 0.237 in(4)
    • 0.241 in(11)
    • 0.25 in(10)
    • 0.255 in(6)
    • 0.289 in(1)
    • 0.312 in(9)
    • 0.315 in(4)
    • 0.317 in(7)
    • 0.32 in(11)
    Cutting Width MintoCutting Width Max
    Cutting Width
    Cutting Width
    • 2.0 mm(3)
    • 2.125 mm(9)
    • 2.375 mm(6)
    • 3.0 mm(4)
    • 3.125 mm(11)
    • 3.176 mm(8)
    • 3.301 mm(9)
    • 4.0 mm(4)
    • 4.101 mm(1)
    • 4.125 mm(11)
    • 4.75 mm(8)
    • 4.875 mm(10)
    • 5.0 mm(4)
    • 5.125 mm(11)
    • 6.0 mm(4)
    • 6.125 mm(11)
    • 6.351 mm(10)
    • 6.476 mm(6)
    • 7.325 mm(1)
    • 7.926 mm(9)
    • 8.0 mm(4)
    • 8.05 mm(7)
    • 8.125 mm(11)
    Cutting Width MintoCutting Width Max
    Insert Geometry
    Insert Seat Size
    Insert Seat Size
    • 2 (18)
    • 3 (33)
    • 4 (33)
    • 5 (15)
    • 6 (32)
    • 8 (31)
    Cutting Edge Length
    Cutting Edge Length
    • 0.25 mm(1)
    • 0.426 mm(1)
    Cutting Edge Length MintoCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.01 in(1)
    • 0.017 in(1)
    Cutting Edge Length MintoCutting Edge Length Max
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Catalog NumberGrade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?