Inserts
    Inserts
    Inserts
    Inserts

    VCGR-FP • VPGR-FP

    Inserts

    Metric
    Inch
    SAP Material Number 5327937
    ISO Catalog Number VCGR160404FP
    ANSI Catalog Number VPGR331FP
    Grade KCP25
    [D] Insert IC Size 9.5200
    [D] Insert IC Size .3750
    [L10] Insert Cutting Edge Length 16.6100
    [L10] Insert Cutting Edge Length .6540
    [S] Insert Thickness 4.7620
    [S] Insert Thickness .1875
    [M] Gage Dimension 10.1520
    [M] Gage Dimension .3997
    [Rε] Corner Radius 0.3970
    [Rε] Corner Radius .0156
    See all Product Variants

    Workpiece Materials

    P
    K

    Machine Side

    loading...

    Workpiece Side

    loading...

    Grades

    • KCK05

      Composition: A multilayered coating with moderately thick MTCVD TiCN-Al2O3 layers over a highly deformation-resistant carbide substrate.
      Application: Designed for high-speed machining of grey and ductile irons. The substrate and coating architecture together with CW5 post-coat treatment ensure a tremendous tool life advantage, especially when cutting higher tensile strength ductile and grey irons where workpiece size consistency and reliability of tool life are critical. Excellent both in straight and varied depths of cut.

    • KCM25

      Composition: A multilayer CVD coating comprised of TiN-MT-TiCN-Al2O3 layers over a tough, cobalt-enriched carbide substrate.
      Application: This CVD-coated grade is designed for general-purpose machining of austenitic stainless steels at moderate speeds and feeds. KCM25 inserts offer an extraordinary combination of toughness, built-up edge resistance, and wear resistance in stainless steel applications.

    • KCP05

      Composition: An innovative, highly deformation-resistant, cobalt-enriched substrate with a specially designed, adherent MTCVD-TiCN-Al2O3 coating.
      Application: For finishing to semi-finishing of most steels, ferritic, martensitic, and PH stainless steels and cast irons. Provides excellent combination of deformation resistance and insert edge strength. The new coating combined with a state-of-the-art post-coat treatment provides high-productivity with long predictable tool life and superior workpiece surface finish.

    • KCP10

      Composition: A specially engineered cobalt-enriched carbide grade with thick MTCVD-TiCN-Al2O3 coating for maximum wear resistance.
      Application: An excellent finishing to medium machining grade for a variety of workpiece materials, including most steels, ferritic, martensitic, and PH stainless steels, and cast irons. The cobalt-enriched substrate offers a balanced combination of deformation resistance and edge toughness, while the thick coating layers offer outstanding abrasion resistance and crater wear resistance for high-speed machining. Smooth coating provides resistance to edge build-up and microchipping and produces excellent surface finishes.

      P
    • KCP25

      Composition: A tough cobalt-enriched carbide grade with a newly designed multilayer MTCVD-TiCN-Al2O3 coating with superior interlayer adhesion.
      Application: Best general-purpose turning grade for most steels and ferritic and martensitic stainless steels. The substrate design ensures adequate deformation resistance with excellent insert edge strength. Coating layers offer good wear resistance over a wide range of machining conditions and the post-coat treatment minimises microchipping and improves coating adhesion to substrate leading to long tool life and improved workpiece finishes.

      P
      K
    • KCU10

      Composition: An advanced multilayer PVD coating over a very deformation-resistant unalloyed carbide substrate. The new and improved coating improves edge stability with wide range speed and feed capabilities.
      Application: The KCU10 grade is ideal for finishing to general machining of most workpiece materials at a wide range of speed and feed capabilities. Excellent for machining most steels, stainless steels, cast irons, non-ferrous materials, and super alloys with improved edge toughness and higher cutting speed/feed capability.

      P
      M
      K
      N
      S
      H
    • KCU25

      Turning Composition: An advanced PVD grade with hard AlTiN coating and fine-grain unalloyed substrate. The new and improved coating improves edge stability with wide range speed and feed capabilities.

      Turning Application: The KCU25 grade is ideal for general machining of most steels, stainless steels, high-temp alloys, titanium, irons, and non-ferrous materials in a wide range of speeds and feeds with improved edge toughness for interrupted cut and high feed rates.

      Holemaking Composition: Advanced CVD TiCN-Al2O3 coating combined with a tough carbide substrate.

      Holemaking Application: First choice for steel, stainless steel, and cast iron. This grade offers adequate deformation resistance, excellent edge strength, and superior wear resistance over a wide range of machining conditions for high productivity with very good reliability.

      P
      M
      K
      N
      S
    If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
    You are about to create a duplicate . Do you want to proceed?
    You are about to delete Do you want to proceed?
    What would you like to rename your to?
    Please enter a valid name
    Please enter a name for the duplicate
    Please enter a valid name
    You are about to add to your My Solutions page. Do you want to proceed?
    Please enter a valid name
    Send a copy of

    Please enter a valid Email
    Please enter a valid name

    We have found the following CAD Drawings

    Select the files you are looking for and download them all at once

    You should be logged to see your dashboard information
    The product/s () you were trying to add to the cart is/are not available, please contact customer service.
    item(s) successfully added to the cart
    View Cart