Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read
Mobile Menu

Top Notch™ Profiling Inserts

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (245)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (245)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (245)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (245)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (245)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (245)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (245)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (245)
  • M Stainless Steel (214)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (214)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (214)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (214)
  • K Cast Iron (221)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (221)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (221)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (221)
  • N Non-Ferrous Materials (254)
    • N1
      Wrought Aluminum
      (240)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (207)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (101)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (254)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (221)
    • N6
      Carbon, Graphite Composites, CFRP
      (207)
  • S High-Temp Alloys (236)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (236)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (236)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (236)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (236)
  • H Hardened Materials (163)
    • H1
      Hardened Materials 44-48 HRC
      (163)
    • H2
      Hardened Materials 48-55 HRC
      (134)
Applications
Applications
  • Face Grooving Face Grooving (63)
  • Facing Facing (6)
  • ID Facing ID Facing (6)
  • ID Thread Turning ID Thread Turning (7)
  • Multiple Direction Cutting Multiple Direction Cutting (100)
  • Profiling Profiling (6)
  • TRN Boring TRN Boring (6)
  • Turning Turning (6)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 62.5 (2)
  • 72.5 (2)
  • 93.0 (1)
  • 95.0 (77)
  • 100.0 (1)
  • 107.5 (9)
  • 117.5 (8)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Bolt-On Head (2)
  • Boring Bar Shank (42)
  • Toolholder (56)
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.005 in (76)
  • 0.008 in (122)
  • 0.016 in (194)
  • 0.02 in (80)
  • 0.031 in (180)
  • 0.039 in (66)
  • 0.047 in (43)
  • 0.063 in (32)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.125 mm (76)
  • 0.2 mm (122)
  • 0.4 mm (194)
  • 0.5 mm (80)
  • 0.8 mm (180)
  • 1.0 mm (66)
  • 1.201 mm (43)
  • 1.6 mm (32)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (260)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (260)
Corner Chamfer Min to Corner Chamfer Max
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K00326 (29)
  • K313 (105)
  • K420 (60)
  • K6 (4)
  • K68 (116)
  • K8735 (29)
  • KB1345 (25)
  • KC250 (82)
  • KC5010 (129)
  • KC5025 (113)
  • KC5410 (91)
  • KC720 (29)
  • KC730 (113)
  • KC7310 (87)
  • KC732 (94)
  • KC8050 (100)
  • KC810 (100)
  • KC850 (119)
  • KC9025 (94)
  • KC910 (89)
  • KC9105 (62)
  • KC9110 (100)
  • KC9120 (34)
  • KC9125 (101)
  • KC9225 (100)
  • KC9315 (89)
  • KC935 (94)
  • KC950 (94)
  • KCD25 (29)
  • KCK05 (37)
  • KCK15B (31)
  • KCM15B (59)
  • KCM25 (100)
  • KCM25B (5)
  • KCP05 (93)
  • KCP10 (106)
  • KCP10B (64)
  • KCP25 (106)
  • KCP25B (68)
  • KCS10B (33)
  • KCU10 (134)
  • KCU25 (127)
  • KD050 (82)
  • KD081 (29)
  • KD100 (94)
  • KD120 (86)
  • KD1425 (101)
  • KS15 (29)
  • KT125 (82)
  • KT150 (87)
  • KT175 (53)
  • KT315 (111)
Hand Of Tool
Hand Of Tool
  • L (41)
  • N (4)
  • R (55)
F Dimension
F Dimension
  • 8.875 mm (2)
  • 9.0 mm (2)
  • 9.4 mm (2)
  • 9.525 mm (4)
  • 10.875 mm (1)
  • 11.0 mm (2)
  • 12.5 mm (1)
  • 12.576 mm (4)
  • 12.625 mm (1)
  • 12.701 mm (3)
  • 13.0 mm (2)
  • 14.275 mm (6)
  • 15.875 mm (2)
  • 16.0 mm (3)
  • 17.0 mm (1)
  • 18.925 mm (2)
  • 19.05 mm (7)
  • 19.425 mm (1)
  • 20.0 mm (2)
  • 22.0 mm (4)
  • 25.0 mm (8)
  • 25.401 mm (8)
  • 27.0 mm (1)
  • 28.451 mm (1)
  • 28.576 mm (2)
  • 31.75 mm (9)
  • 32.0 mm (14)
  • 35.0 mm (1)
  • 38.1 mm (2)
  • 50.801 mm (2)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.35 in (2)
  • 0.354 in (2)
  • 0.37 in (2)
  • 0.375 in (4)
  • 0.428 in (1)
  • 0.433 in (2)
  • 0.492 in (1)
  • 0.495 in (4)
  • 0.497 in (1)
  • 0.5 in (3)
  • 0.512 in (2)
  • 0.562 in (6)
  • 0.625 in (2)
  • 0.63 in (3)
  • 0.669 in (1)
  • 0.745 in (2)
  • 0.75 in (7)
  • 0.765 in (1)
  • 0.787 in (2)
  • 0.866 in (4)
  • 0.984 in (8)
  • 1.0 in (8)
  • 1.063 in (1)
  • 1.12 in (1)
  • 1.125 in (2)
  • 1.25 in (9)
  • 1.26 in (14)
  • 1.379 in (1)
  • 1.5 in (2)
  • 2.0 in (2)
F Dimension Min to F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 16.0 mm (4)
  • 16.776 mm (2)
  • 17.026 mm (2)
  • 19.05 mm (1)
  • 20.0 mm (3)
  • 22.85 mm (4)
  • 24.901 mm (6)
  • 25.0 mm (2)
  • 26.925 mm (1)
  • 32.0 mm (3)
  • 33.025 mm (5)
  • 40.0 mm (4)
  • 45.051 mm (1)
  • 46.475 mm (1)
  • 50.0 mm (1)
  • 50.801 mm (2)
  • 53.85 mm (1)
  • 63.0 mm (1)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.63 in (4)
  • 0.66 in (2)
  • 0.67 in (2)
  • 0.75 in (1)
  • 0.787 in (3)
  • 0.9 in (4)
  • 0.98 in (6)
  • 0.984 in (2)
  • 1.06 in (1)
  • 1.26 in (3)
  • 1.3 in (5)
  • 1.575 in (4)
  • 1.774 in (1)
  • 1.83 in (1)
  • 1.969 in (1)
  • 2.0 in (2)
  • 2.12 in (1)
  • 2.48 in (1)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (73)
  • E (17)
  • P (4)
  • S (6)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (7)
  • DOUBLE POSITIVE (5)
  • NEGATIVE-ZERO (42)
  • NEUTRAL (ZERO) (46)
Maximum Bore Depth
Maximum Bore Depth
  • 1.891 in (2)
  • 2.0 in (2)
  • 2.5 in (2)
  • 2.52 in (2)
  • 2.835 in (2)
  • 3.0 in (8)
  • 3.15 in (2)
  • 3.75 in (2)
  • 3.781 in (1)
  • 3.938 in (3)
  • 4.0 in (5)
  • 4.5 in (2)
  • 4.992 in (1)
  • 5.0 in (1)
  • 5.039 in (4)
  • 6.0 in (3)
  • 6.299 in (1)
  • 7.875 in (1)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 48.0 mm (2)
  • 50.801 mm (2)
  • 63.5 mm (2)
  • 64.0 mm (2)
  • 72.0 mm (2)
  • 76.2 mm (8)
  • 80.0 mm (2)
  • 95.25 mm (2)
  • 96.0 mm (1)
  • 100.0 mm (3)
  • 101.601 mm (5)
  • 114.301 mm (2)
  • 126.801 mm (1)
  • 127.0 mm (1)
  • 128.0 mm (4)
  • 152.4 mm (3)
  • 160.0 mm (1)
  • 200.0 mm (1)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • C (10)
  • S (34)
Front-End
Clamp Style
Clamp Style
  • N (100)
Insert Shape
Insert Shape
  • D-DIAMOND/RHOMBIC 55 (22)
  • K-PARALLELOGRAM 55 (12)
  • N/K-PARALLELOGRAM 55 (197)
  • V-DIAMOND/RHOMBIC 35 (129)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.116 in (2)
  • 0.121 in (1)
  • 0.185 in (1)
  • 0.244 in (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 2.95 mm (2)
  • 3.075 mm (1)
  • 4.7 mm (1)
  • 6.2 mm (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Insert Geometry
Shape
Shape
  • D-DIAMOND/RHOMBIC 55 (17)
  • K-PARALLELOGRAM 55 (8)
  • N/K-PARALLELOGRAM 55 (141)
  • V-DIAMOND/RHOMBIC 35 (94)
Insert IC Size
Insert IC Size
  • 4.75 mm (1)
  • 6.351 mm (10)
  • 9.525 mm (84)
  • 12.701 mm (17)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.187 in (1)
  • 0.25 in (10)
  • 0.375 in (84)
  • 0.5 in (17)
Insert IC Size Min to Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 11.05 mm (1)
  • 11.076 mm (9)
  • 11.601 mm (93)
  • 11.625 mm (4)
  • 15.451 mm (28)
  • 15.5 mm (17)
  • 16.6 mm (84)
  • 17.5 mm (8)
  • 22.725 mm (3)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.435 in (1)
  • 0.436 in (9)
  • 0.457 in (93)
  • 0.458 in (4)
  • 0.608 in (28)
  • 0.61 in (17)
  • 0.654 in (84)
  • 0.69 in (8)
  • 0.895 in (3)
Cutting Edge Length Min to Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • 08 (28)
  • 1 (6)
  • 15 (73)
  • 2 (2)
  • 20 (19)
  • 25 (9)
  • 32 (1)
  • FP (48)
  • HP (2)
Cutting Tool Material
Cutting Tool Material
  • B H (86)
  • B L (82)
  • D P (108)
  • H T (111)
  • H W (335)
Tolerance Class
Tolerance Class
  • G (197)
  • M (32)
  • U (31)
Back-End
Connection Type
Connection Type
  • BORING BAR (42)
  • BORING BAR HEAD (2)
  • SQUARE SHANK (56)
Back-End Diameter
Back-End Diameter
  • 12.0 mm (4)
  • 12.701 mm (5)
  • 15.875 mm (4)
  • 16.0 mm (3)
  • 19.05 mm (7)
  • 20.0 mm (2)
  • 25.0 mm (3)
  • 25.401 mm (5)
  • 31.701 mm (1)
  • 31.75 mm (1)
  • 32.0 mm (4)
  • 38.1 mm (3)
  • 40.0 mm (1)
  • 50.0 mm (1)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.473 in (4)
  • 0.5 in (5)
  • 0.625 in (4)
  • 0.63 in (3)
  • 0.75 in (7)
  • 0.787 in (2)
  • 0.984 in (3)
  • 1.0 in (5)
  • 1.248 in (1)
  • 1.25 in (1)
  • 1.26 in (4)
  • 1.5 in (3)
  • 1.575 in (1)
  • 1.969 in (1)
Back-End Diameter Min to Back-End Diameter Max
Shank Height
Shank Height
  • 0.449 in (2)
  • 0.473 in (1)
  • 0.5 in (4)
  • 0.606 in (1)
  • 0.625 in (3)
  • 0.63 in (2)
  • 0.75 in (9)
  • 0.787 in (10)
  • 0.939 in (3)
  • 0.984 in (11)
  • 1.0 in (10)
  • 1.214 in (4)
  • 1.25 in (2)
  • 1.26 in (2)
  • 1.5 in (2)
  • 1.53 in (1)
  • 1.848 in (1)
Shank Height Min to Shank Height Max
Shank Height
Shank Height
  • 11.4 mm (2)
  • 12.0 mm (1)
  • 12.701 mm (4)
  • 15.4 mm (1)
  • 15.875 mm (3)
  • 16.0 mm (2)
  • 19.05 mm (9)
  • 20.0 mm (10)
  • 23.826 mm (3)
  • 25.0 mm (11)
  • 25.401 mm (10)
  • 30.826 mm (4)
  • 31.75 mm (2)
  • 32.0 mm (2)
  • 38.1 mm (2)
  • 38.825 mm (1)
  • 46.95 mm (1)
Shank Height Min to Shank Height Max
Shank Width
Shank Width
  • 0.473 in (1)
  • 0.5 in (4)
  • 0.625 in (3)
  • 0.63 in (2)
  • 0.75 in (9)
  • 0.787 in (10)
  • 0.864 in (3)
  • 0.984 in (13)
  • 1.0 in (10)
  • 1.141 in (4)
  • 1.25 in (2)
  • 1.455 in (1)
  • 1.5 in (2)
  • 1.848 in (1)
Shank Width Min to Shank Width Max
Shank Width
Shank Width
  • 12.0 mm (1)
  • 12.701 mm (4)
  • 15.875 mm (3)
  • 16.0 mm (2)
  • 19.05 mm (9)
  • 20.0 mm (10)
  • 21.951 mm (3)
  • 25.0 mm (13)
  • 25.401 mm (10)
  • 28.951 mm (4)
  • 31.75 mm (2)
  • 36.95 mm (1)
  • 38.1 mm (2)
  • 46.95 mm (1)
Shank Width Min to Shank Width Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Top Notch™ Profiling

Toolholders
(4 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length Inclination Angle [GAAO] Orthogonal Rake Angle Gage Insert Clamp Screw ID Drive Size
1097186 NKLNL121B NKLNL121B 19.0500 .7500 19.0500 .7500 25.4000 1.000 114.3000 4.500 31.0000 1.220 -2.000 -5.000 NPL132F 5/32
    List price:
    $119,65 /each.
    Your price::
    Qty
    1097187 NKLNL161C NKLNL161C 25.4000 1.000 25.4000 1.000 31.7500 1.250 127.0000 5.000 31.7500 1.250 -2.000 -5.000 NPL132F 5/32
      List price:
      $123,32 /each.
      Your price::
      Qty
      1097512 NKLNR121B NKLNR121B 19.0500 .7500 19.0500 .7500 25.4000 1.000 114.3000 4.500 31.0000 1.220 -2.000 -5.000 NPR132F 5/32
        List price:
        $119,65 /each.
        Your price::
        Qty
        1097513 NKLNR161C NKLNR161C 25.4000 1.000 25.4000 1.000 31.7500 1.250 127.0000 5.000 31.7500 1.250 -2.000 -5.000 NPR132F 5/32
          List price:
          $123,32 /each.
          Your price::
          Qty
          List price:
          Discount: %
          Your price::
          Replacement This item is no longer available
          Replacement Product Please contact customer service for assistance
          Qty

          Sold in pkg. of

          ORIGINAL PRODUCT

          Top Notch™ Profiling

          Toolholders
          (1 Products)
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length [GAAP] Axial Rake Angle Gage Insert Shim Screw ID Drive Size Clamp Screw ID Drive Size
          1097314 NDPPN164D NDPPN164D 25.4000 1.000 25.4000 1.000 12.7000 .5000 152.4000 6.000 40.3860 1.590 0.000 DP..432 1/16 5/32
            List price:
            $126,92 /each.
            Your price::
            Qty
            List price:
            Discount: %
            Your price::
            Replacement This item is no longer available
            Replacement Product Please contact customer service for assistance
            Qty

            Sold in pkg. of

            ORIGINAL PRODUCT

            Top Notch™ Profiling

            Toolholders
            (2 Products)
            View Products
            SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length Inclination Angle [GAAO] Orthogonal Rake Angle Gage Insert Shim Screw ID Drive Size Clamp Screw ID Drive Size
            1097033 NDLPL164D NDLPL164D 25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 35.1000 1.380 0.000 0.000 DP..432 1/16 5/32
              List price:
              $127,60 /each.
              Your price::
              Qty
              1096944 NDLPR164D NDLPR164D 25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 35.1000 1.380 0.000 0.000 DP..432 1/16 5/32
                List price:
                $127,36 /each.
                Your price::
                Qty
                List price:
                Discount: %
                Your price::
                Replacement This item is no longer available
                Replacement Product Please contact customer service for assistance
                Qty

                Sold in pkg. of

                ORIGINAL PRODUCT

                Top Notch™ Profiling

                Toolholders
                (1 Products)
                View Products
                SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height