| SAP Material Number | 1138041 |
| ISO Catalog Number | STN16150ISOE |
| ANSI Catalog Number | STN16150ISOE |
| Grade | KC620M |
| Thread Pitch | 1,5 |
| INS_IRR_CTLG_THREAD_PITCH_I | |
| [D] Insert IC Size | 9.5250 |
| [D] Insert IC Size | .3750 |
| [LI] Insert Length | 16.0020 |
| [LI] Insert Length | .6300 |
| [W] Cutting Width | 14.9860 |
| [W] Cutting Width | .5900 |
| Number of Teeth | 10 |
Diese leistungsstarke Hartmetallsorte mit PVD-TiN-TiCN-TiN-Beschichtung zeichnet sich
durch eine hohe Härte und Verschleißfestigkeit bei der Fräsbearbeitung sämtlicher
Werkstoffarten aus und ist die erste Wahl zur Bearbeitung von Stahl. KC610M sollte mit
Kühlmittel oder mit Minimalschmierung verwendet werden.
| Materials | Brinell | surface speeds | indexable inserts | |
| steel | HB | KC610M | KC635M | feed fz (IPT) |
| P1 | 125 | 100–210 | 90–180 | 0,05–0,20 |
| P2 | 180 | 100–170 | 90–160 | 0,05–0,20 |
| P3 | 225 | 60–130 | 70–115 | 0,05–0,20 |
| P4 | 250 | 80–150 | 80–160 | 0,05–0,20 |
| P5 | 275 | 75–130 | 80–160 | 0,05–0,15 |
| P6 | 325 | 70–110 | 60–100 | 0,05–0,10 |
| stainless steel | ||||
| M1 | 180 | 100–170 | 120–180 | 0,05–0,10 |
| M2 | 250 | 70–140 | 100–140 | 0,05–0,10 |
| M3 | 330 | 70–120 | 100–120 | 0,05–0,10 |
| cast iron | ||||
| K1 | 180 | 60–130 | 100–120 | 0,02–0,08 |
| K2 | 220 | 60–125 | 80–100 | 0,05–0,15 |
| K3 | 260 | 50–90 | 60–90 | 0,05–0,10 |
| non-ferrous | ||||
| N1 | 60–100 | 100–250 | – | 0,05–0,25 |
| high-temp alloys | ||||
| S1 | 200 | 20–45 | 20–40 | 0,05–0,10 |
| S2 | 250 | 20–30 | 20–30 | 0,02–0,05 |
| S3 | 280 | 15–20 | 15–20 | 0,02–0,05 |
| S4 | 350 | 10–15 | 10–15 | 0,02–0,05 |
| hardened steel | ||||
| H1 | 55 HRC | 20–45 | 20–45 | 0,01–0,03 |
| Materials | Brinell | surface speeds | indexable inserts | |
| steel | HB | KC610M | KC635M | feed fz (IPT) |
| P1 | 125 | 325–675 | 290–590 | .002–.008 |
| P2 | 180 | 290–550 | 290–520 | .002–.008 |
| P3 | 225 | 200–425 | 225–375 | .002–.008 |
| P4 | 250 | 250–490 | 250–500 | .002–.008 |
| P5 | 275 | 250–425 | 250–500 | .002–.006 |
| P6 | 325 | 225–350 | 200–325 | .002–.004 |
| stainless steel | ||||
| M1 | 180 | 325–550 | 375–590 | .002–.004 |
| M2 | 250 | 225–450 | 325–450 | .002–.004 |
| M3 | 330 | 225–375 | 325–375 | .002–.004 |
| cast iron | ||||
| K1 | 180 | 200–425 | 325–450 | .001–.003 |
| K2 | 220 | 200–390 | 250–325 | .002–.006 |
| K3 | 260 | 160–290 | 200–275 | .002–.004 |
| non-ferrous | ||||
| N1 | 60–100 | 325–820 | – | .002–.010 |
| high-temp alloys | ||||
| S1 | 200 | 65–140 | 65–130 | .002–.004 |
| S2 | 250 | 65–90 | 65–90 | .001–.002 |
| S3 | 280 | 50–65 | 50–65 | .001–.002 |
| S4 | 350 | 30–50 | 30–50 | .001–.002 |
| hardened steel | ||||
| H1 | 55HRc | 65–140 | 65–140 | .0004–.001 |
Kennametal Inc. 525 William Penn Place Suite 3300, Pittsburgh, PA 15219
ISO Katalog
ANSI Katalog
to find similar products.
