Indexable Inserts

필터 선택
필터
필터 보기 위치
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (602)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (599)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (599)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (600)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (600)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (599)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (574)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (562)
  • M Stainless Steel (560)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (560)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (560)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (536)
  • K Cast Iron (553)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (553)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (553)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (553)
  • N Non-Ferrous Materials (466)
    • N1
      Wrought Aluminum (465)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (463)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (297)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (439)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (452)
    • N6
      Carbon, Graphite Composites, CFRP (411)
    • N7
      MMC's (259)
  • S High-Temp Alloys (514)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (502)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (502)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (514)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (514)
  • H Hardened Materials (123)
    • H1
      Hardened Materials 44-48 HRC (123)
    • H2
      Hardened Materials 48-55 HRC (50)
    • H3
      Hardened Materials 56-60 HRC (36)
    • H4
      Hardened Materials >60 HRC (36)
  • C CFRP Materials (30)
    • C1
      CFRP, CFRP / CFRP (14)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous (16)
1차 선택 선택
  • BR (55)
  • CN (231)
  • DE (231)
  • GB (164)
  • IN (124)
  • SG (160)
  • US (234)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (55)
  • Interrupted (226)
  • Lightly Interrupted Cut (76)
  • Smooth Cut (191)
  • Stable (332)
  • Unstable (262)
  • Varying Depth of Cut (103)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 0.0 (12)
  • 1.0 (26)
  • 2.0 (244)
  • 3.0 (163)
  • 4.0 (182)
  • 8.0 (65)
Cutting Edges Per Insert Min 받는 사람 Cutting Edges Per Insert Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.002 in (2)
  • 0.004 in (9)
  • 0.008 in (58)
  • 0.016 in (217)
  • 0.024 in (6)
  • 0.031 in (244)
  • 0.034 in (9)
  • 0.039 in (23)
  • 0.047 in (68)
  • 0.063 in (15)
  • 0.079 in (9)
Corner Radius Min 받는 사람 Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (2)
  • 0.1 mm (9)
  • 0.2 mm (58)
  • 0.4 mm (217)
  • 0.601 mm (6)
  • 0.8 mm (244)
  • 0.851 mm (9)
  • 1.0 mm (23)
  • 1.201 mm (68)
  • 1.6 mm (15)
  • 2.0 mm (9)
Corner Radius Min 받는 사람 Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • CS5 (11)
  • K313 (16)
  • K68 (2)
  • KC5010 (75)
  • KC5025 (32)
  • KC5410 (14)
  • KC7015 (6)
  • KC7140 (66)
  • KC720 (8)
  • KC7215 (38)
  • KC7225 (1)
  • KC730 (12)
  • KC7315 (14)
  • KCK05 (3)
  • KCK05B (1)
  • KCK15B (4)
  • KCMS35 (18)
  • KCP05 (4)
  • KCP10 (6)
  • KCP10B (6)
  • KCP25 (6)
  • KCP25B (5)
  • KCPK10 (40)
  • KCU10 (14)
  • KCU25 (112)
  • KCU40 (119)
  • KD1425 (6)
  • KM1 (7)
  • KMF (11)
  • KT315 (33)
  • KT325 (2)
Wiper Insert
Wiper Insert
  • N (658)
  • Y (34)
Countersunk Angle
Countersunk Angle
  • 30.0 (4)
  • 41.0 (4)
  • 45.0 (18)
Countersunk Angle Min 받는 사람 Countersunk Angle Max
frontEnd
Cutting Width
Cutting Width
  • 0.228 in (1)
  • 0.24 in (1)
  • 0.386 in (2)
Cutting Width Min 받는 사람 Cutting Width Max
Cutting Width
Cutting Width
  • 5.801 mm (1)
  • 6.101 mm (1)
  • 9.8 mm (2)
Cutting Width Min 받는 사람 Cutting Width Max
Insert Shape
Insert Shape
  • B-PARALLELOGRAM 82 (34)
  • C-DIAMOND/RHOMBIC 80 (243)
  • COUNTERBORE/COUNTERSINK MISC (32)
  • D-DIAMOND/RHOMBIC 90 (30)
  • S-SQUARE 90 (185)
  • T-TRIANGLE 60 (12)
  • X-TRIGON 84 (156)
insertGeometry
Shape
Shape
  • B-PARALLELOGRAM 82 (34)
  • C-DIAMOND/RHOMBIC 80 (243)
  • COUNTERBORE/COUNTERSINK MISC (32)
  • D-DIAMOND/RHOMBIC 90 (30)
  • S-SQUARE 90 (185)
  • T-TRIANGLE 60 (12)
  • X-TRIGON 84 (156)
Insert IC Size
Insert IC Size
  • 5.0 mm (7)
  • 5.426 mm (2)
  • 5.551 mm (13)
  • 6.0 mm (47)
  • 6.351 mm (81)
  • 7.801 mm (2)
  • 7.926 mm (16)
  • 7.95 mm (24)
  • 8.0 mm (41)
  • 9.525 mm (111)
  • 10.0 mm (33)
  • 12.0 mm (27)
  • 12.701 mm (152)
  • 15.0 mm (25)
  • 15.726 mm (22)
  • 15.875 mm (13)
  • 17.6 mm (9)
  • 19.05 mm (4)
Insert IC Size Min 받는 사람 Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.197 in (7)
  • 0.214 in (2)
  • 0.219 in (13)
  • 0.237 in (47)
  • 0.25 in (81)
  • 0.307 in (2)
  • 0.312 in (16)
  • 0.313 in (24)
  • 0.315 in (41)
  • 0.375 in (111)
  • 0.394 in (33)
  • 0.473 in (27)
  • 0.5 in (152)
  • 0.591 in (25)
  • 0.619 in (22)
  • 0.625 in (13)
  • 0.694 in (9)
  • 0.75 in (4)
Insert IC Size Min 받는 사람 Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 3.301 mm (7)
  • 3.975 mm (28)
  • 5.2 mm (1)
  • 5.301 mm (26)
  • 5.426 mm (8)
  • 5.65 mm (4)
  • 6.2 mm (12)
  • 6.351 mm (13)
  • 6.45 mm (46)
  • 6.476 mm (7)
  • 6.525 mm (1)
  • 6.625 mm (32)
  • 7.801 mm (17)
  • 7.851 mm (1)
  • 7.926 mm (22)
  • 7.95 mm (26)
  • 9.375 mm (22)
  • 9.525 mm (20)
  • 9.625 mm (3)
  • 9.675 mm (66)
  • 9.826 mm (1)
  • 9.925 mm (24)
  • 11.0 mm (3)
  • 11.525 mm (1)
  • 11.625 mm (4)
  • 11.65 mm (4)
  • 12.55 mm (16)
  • 12.701 mm (33)
  • 12.9 mm (112)
  • 13.75 mm (3)
  • 15.726 mm (22)
  • 16.125 mm (4)
  • 16.5 mm (3)
  • 19.35 mm (4)
Cutting Edge Length Min 받는 사람 Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.13 in (7)
  • 0.156 in (28)
  • 0.206 in (1)
  • 0.209 in (26)
  • 0.214 in (8)
  • 0.222 in (4)
  • 0.244 in (12)
  • 0.25 in (13)
  • 0.254 in (46)
  • 0.255 in (7)
  • 0.257 in (1)
  • 0.261 in (32)
  • 0.307 in (17)
  • 0.309 in (1)
  • 0.312 in (22)
  • 0.313 in (26)
  • 0.369 in (22)
  • 0.375 in (20)
  • 0.379 in (3)
  • 0.381 in (66)
  • 0.387 in (1)
  • 0.391 in (24)
  • 0.433 in (3)
  • 0.454 in (1)
  • 0.458 in (4)
  • 0.459 in (4)
  • 0.494 in (16)
  • 0.5 in (33)
  • 0.508 in (112)
  • 0.541 in (3)
  • 0.619 in (22)
  • 0.635 in (4)
  • 0.65 in (3)
  • 0.762 in (4)
Cutting Edge Length Min 받는 사람 Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • 11 (5)
  • 20 (33)
  • 21 (30)
  • 22 (4)
  • DS (34)
  • FF (3)
  • FN (29)
  • FP (31)
  • FW (16)
  • GD (49)
  • HD (4)
  • HP (152)
  • HPF (5)
  • LD (13)
  • LF (71)
  • LP (12)
  • MD (89)
  • MP (7)
  • MW (18)
  • RP (9)
  • UF (4)
Cutting Tool Material
Cutting Tool Material
  • D P (6)
  • H T (34)
  • H W (652)
Tolerance Class
Tolerance Class
  • G (154)
  • H (12)
  • M (142)
  • P (68)
No filters matching ""
내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
product-image
Please adjust the following properties from

ISO 카탈로그 번호

ANSI 카탈로그 번호

to find similar products.

The following files are available

Please select a file to download

Models

Product data

대시보드 정보를 보려면 로그인해야 합니다.
Session expired due to inactivity, please login again
장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
항목이 장바구니에 추가되었습니다.

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO 카탈로그 번호 등급    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

등록해 주셔서 감사합니다. 지금 로그인하여 사이트를 이용하실 수 있습니다.

You are about to leave the Solution building process.

Are you sure you want to leave?