환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

Kennametal 고객 서비스

제품 관련 질문이 있으십니까?

전문 분야별 글로벌 서비스 전문가 전체 목록 보기

빠른 주문
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기

KM

필터 선택
Filters
필터
필터 보기 위치
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (1359)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (1355)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (1355)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (1355)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (1355)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (1355)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (1359)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (1359)
  • M Stainless Steel (1352)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (1352)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (1352)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (1352)
  • K Cast Iron (1381)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (1381)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (1381)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (1379)
  • N Non-Ferrous Materials (1298)
    • N1
      Wrought Aluminum (1282)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (1278)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (857)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (1291)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1277)
    • N6
      Carbon, Graphite Composites, CFRP (1195)
    • N7
      MMC's (1216)
  • S High-Temp Alloys (1361)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (1359)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (1361)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (1359)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (1334)
  • H Hardened Materials (1191)
    • H1
      Hardened Materials 44-48 HRC (1191)
    • H2
      Hardened Materials 48-55 HRC (1121)
    • H3
      Hardened Materials 56-60 HRC (1026)
    • H4
      Hardened Materials >60 HRC (979)
Applications
Applications
  • Chamfer Turning Chamfer Turning (56)
  • Convex Drilling Convex Drilling (7)
  • Cut-Off Cut-Off (41)
  • Deep Grooving Deep Grooving (41)
  • Drilling Drilling (7)
  • Face Grooving Face Grooving (41)
  • Facing Facing (762)
  • Grooving Grooving (163)
  • ID Facing ID Facing (6)
  • ID Grooving ID Grooving (74)
  • ID Thread Turning ID Thread Turning (128)
  • Inclined Entry Drilling Inclined Entry Drilling (7)
  • Inclined Exit Drilling Inclined Exit Drilling (7)
  • Multiple Direction Cutting Multiple Direction Cutting (901)
  • OD Thread Turning OD Thread Turning (158)
  • Plunge Turning Plunge Turning (50)
  • Profiling Profiling (746)
  • TRN Boring TRN Boring (714)
  • Threading Threading (179)
  • Turning Turning (1008)
  • X-Offset Drilling X-Offset Drilling (7)
Cutting Diameter
Cutting Diameter
  • 0.625 in (1)
  • 0.687 in (1)
  • 0.75 in (1)
  • 0.814 in (1)
  • 0.875 in (1)
  • 0.937 in (1)
  • 1.0 in (1)
  • 1.063 in (1)
  • 1.125 in (1)
  • 1.143 in (1)
  • 1.22 in (1)
  • 1.25 in (1)
  • 1.375 in (1)
  • 1.5 in (1)
  • 1.625 in (1)
  • 1.75 in (1)
  • 1.875 in (1)
  • 2.0 in (1)
Cutting Diameter Min 받는 사람 Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 15.875 mm (1)
  • 17.45 mm (1)
  • 19.05 mm (1)
  • 20.651 mm (1)
  • 22.225 mm (1)
  • 23.8 mm (1)
  • 25.401 mm (1)
  • 27.0 mm (1)
  • 28.576 mm (1)
  • 29.0 mm (1)
  • 31.0 mm (1)
  • 31.75 mm (1)
  • 34.926 mm (1)
  • 38.1 mm (1)
  • 41.276 mm (1)
  • 44.45 mm (1)
  • 47.625 mm (1)
  • 50.801 mm (1)
Cutting Diameter Min 받는 사람 Cutting Diameter Max
Type of Thread
Type of Thread
  • 55 (71)
  • 60 (196)
  • ACME (148)
  • API (99)
  • API BUTTRESS (16)
  • API RD (106)
  • BSPT (55)
  • BSW (125)
  • BUTTRESS (125)
  • M (147)
  • NPT (109)
  • NPTF (55)
  • RD DIN 405 (66)
  • STUB ACME (120)
  • TR DIN 103 (66)
  • UN (180)
  • UNJ (109)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (1231)
  • Interrupted (683)
  • Lightly Interrupted Cut (1244)
  • Smooth Cut (1246)
  • Varying Depth of Cut (1246)
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 47.625 mm (1)
  • 52.401 mm (1)
  • 57.151 mm (1)
  • 61.901 mm (1)
  • 66.675 mm (1)
  • 71.45 mm (1)
  • 76.2 mm (1)
  • 81.0 mm (1)
  • 85.726 mm (1)
  • 87.0 mm (1)
  • 93.0 mm (1)
  • 95.25 mm (1)
  • 104.775 mm (1)
  • 114.301 mm (1)
  • 123.825 mm (1)
  • 133.35 mm (1)
  • 142.875 mm (1)
  • 152.4 mm (1)
Maximum Hole Depth [L4] Min 받는 사람 Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 1.875 in (1)
  • 2.063 in (1)
  • 2.25 in (1)
  • 2.437 in (1)
  • 2.625 in (1)
  • 2.813 in (1)
  • 3.0 in (1)
  • 3.189 in (1)
  • 3.375 in (1)
  • 3.426 in (1)
  • 3.661 in (1)
  • 3.75 in (1)
  • 4.125 in (1)
  • 4.5 in (1)
  • 4.875 in (1)
  • 5.25 in (1)
  • 5.625 in (1)
  • 6.0 in (1)
Maximum Hole Depth [L4] Min 받는 사람 Maximum Hole Depth [L4] Max
Reach
Reach
  • 2.52 in (1)
  • 2.835 in (1)
  • 2.992 in (1)
  • 3.189 in (1)
  • 3.386 in (1)
  • 3.543 in (1)
  • 3.74 in (1)
  • 3.781 in (1)
  • 4.055 in (1)
  • 4.213 in (1)
  • 4.331 in (1)
  • 4.606 in (1)
  • 5.079 in (1)
  • 5.472 in (1)
  • 6.22 in (1)
  • 6.575 in (1)
  • 7.165 in (1)
  • 7.521 in (1)
Reach Min 받는 사람 Reach Max
Reach
Reach
  • 64.0 mm (1)
  • 72.0 mm (1)
  • 76.0 mm (1)
  • 81.0 mm (1)
  • 86.0 mm (1)
  • 90.0 mm (1)
  • 95.0 mm (1)
  • 96.0 mm (1)
  • 103.0 mm (1)
  • 107.0 mm (1)
  • 110.0 mm (1)
  • 117.0 mm (1)
  • 129.0 mm (1)
  • 139.0 mm (1)
  • 158.0 mm (1)
  • 167.0 mm (1)
  • 182.0 mm (1)
  • 191.0 mm (1)
Reach Min 받는 사람 Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (65)
  • 48.0 (14)
  • 49.783 (3)
  • 50.0 (3)
  • 61.0 (2)
  • 62.5 (20)
  • 63.0 (8)
  • 72.5 (3)
  • 75.0 (149)
  • 85.0 (4)
  • 90.0 (359)
  • 91.0 (2)
  • 93.0 (358)
  • 95.0 (340)
  • 107.5 (82)
Tool Cutting Edge Angle Min 받는 사람 Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Cutoff Support Blade A1-A3 (3)
  • KM (985)
Number of Flutes
Number of Flutes
  • 2 (18)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (861)
  • 2.0 (912)
  • 3.0 (249)
  • 4.0 (759)
  • 6.0 (130)
  • 8.0 (443)
Cutting Edges Per Insert Min 받는 사람 Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 0.046 in (1)
  • 0.591 in (7)
  • 0.787 in (88)
  • 0.797 in (1)
  • 0.984 in (35)
  • 0.992 in (2)
  • 1.181 in (143)
  • 1.379 in (50)
  • 1.575 in (139)
  • 1.772 in (40)
  • 1.811 in (6)
  • 1.85 in (8)
  • 1.969 in (194)
  • 2.165 in (1)
  • 2.283 in (3)
  • 2.362 in (260)
  • 2.757 in (166)
  • 2.926 in (2)
  • 3.122 in (1)
  • 3.15 in (32)
  • 3.426 in (2)
  • 3.516 in (1)
  • 3.543 in (51)
  • 3.622 in (2)
  • 3.819 in (2)
  • 3.938 in (39)
  • 4.0 in (5)
  • 4.331 in (45)
  • 4.392 in (4)
  • 4.425 in (4)
  • 4.488 in (4)
  • 4.529 in (17)
  • 4.724 in (1)
  • 4.819 in (2)
  • 4.906 in (1)
  • 4.921 in (29)
  • 5.0 in (4)
  • 5.094 in (1)
  • 5.118 in (1)
  • 5.281 in (1)
  • 5.307 in (2)
  • 5.469 in (1)
  • 5.513 in (56)
  • 5.656 in (1)
  • 5.844 in (1)
  • 5.906 in (3)
  • 5.944 in (1)
  • 6.0 in (3)
  • 6.008 in (1)
  • 6.219 in (1)
  • 6.494 in (1)
  • 6.508 in (1)
  • 6.694 in (9)
  • 6.883 in (1)
  • 7.37 in (1)
  • 7.758 in (1)
  • 8.496 in (1)
  • 8.871 in (1)
  • 9.443 in (1)
  • 9.818 in (1)
Over All Length [L] Min 받는 사람 Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 1.175 mm (1)
  • 15.0 mm (7)
  • 20.0 mm (88)
  • 20.25 mm (1)
  • 25.0 mm (35)
  • 25.201 mm (2)
  • 30.0 mm (143)
  • 35.0 mm (50)
  • 40.0 mm (139)
  • 45.0 mm (40)
  • 46.0 mm (6)
  • 47.0 mm (8)
  • 50.0 mm (194)
  • 55.0 mm (1)
  • 58.0 mm (3)
  • 60.0 mm (260)
  • 70.0 mm (166)
  • 74.3 mm (2)
  • 79.301 mm (1)
  • 80.0 mm (32)
  • 87.0 mm (2)
  • 89.301 mm (1)
  • 90.0 mm (51)
  • 92.0 mm (2)
  • 97.0 mm (2)
  • 100.0 mm (39)
  • 101.601 mm (5)
  • 110.0 mm (45)
  • 111.551 mm (4)
  • 112.4 mm (4)
  • 114.0 mm (4)
  • 115.0 mm (17)
  • 120.0 mm (1)
  • 122.4 mm (2)
  • 124.625 mm (1)
  • 125.0 mm (29)
  • 127.0 mm (4)
  • 129.4 mm (1)
  • 130.0 mm (1)
  • 134.15 mm (1)
  • 134.8 mm (2)
  • 138.925 mm (1)
  • 140.0 mm (56)
  • 143.675 mm (1)
  • 148.425 mm (1)
  • 150.0 mm (3)
  • 150.951 mm (1)
  • 152.4 mm (3)
  • 152.6 mm (1)
  • 157.951 mm (1)
  • 164.951 mm (1)
  • 165.3 mm (1)
  • 170.0 mm (9)
  • 174.826 mm (1)
  • 187.201 mm (1)
  • 197.05 mm (1)
  • 215.8 mm (1)
  • 225.326 mm (1)
  • 239.851 mm (1)
  • 249.375 mm (1)
Over All Length [L] Min 받는 사람 Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.001 in (69)
  • 0.002 in (221)
  • 0.003 in (175)
  • 0.004 in (837)
  • 0.005 in (71)
  • 0.006 in (123)
  • 0.007 in (121)
  • 0.008 in (873)
  • 0.01 in (118)
  • 0.011 in (79)
  • 0.012 in (77)
  • 0.014 in (204)
  • 0.015 in (19)
  • 0.016 in (1030)
  • 0.017 in (70)
  • 0.019 in (80)
  • 0.02 in (106)
  • 0.021 in (7)
  • 0.023 in (83)
  • 0.024 in (58)
  • 0.027 in (3)
  • 0.028 in (14)
  • 0.03 in (58)
  • 0.031 in (1165)
  • 0.033 in (5)
  • 0.034 in (4)
  • 0.035 in (80)
  • 0.037 in (19)
  • 0.038 in (3)
  • 0.039 in (115)
  • 0.041 in (8)
  • 0.047 in (1079)
  • 0.049 in (99)
  • 0.055 in (5)
  • 0.06 in (112)
  • 0.062 in (195)
  • 0.063 in (913)
  • 0.069 in (99)
  • 0.078 in (54)
  • 0.079 in (84)
  • 0.08 in (4)
  • 0.089 in (80)
  • 0.094 in (179)
  • 0.095 in (364)
  • 0.098 in (28)
  • 0.099 in (2)
  • 0.125 in (55)
  • 0.126 in (117)
  • 0.157 in (29)
  • 0.188 in (2)
  • 0.197 in (3)
  • 0.237 in (4)
  • 0.25 in (11)
  • 0.315 in (1)
  • 0.394 in (3)
  • 0.492 in (5)
  • 0.63 in (4)
Corner Radius Min 받는 사람 Corner Radius Max
Corner Radius
Corner Radius
  • 0.025 mm (69)
  • 0.05 mm (221)
  • 0.076 mm (175)
  • 0.1 mm (837)
  • 0.125 mm (71)
  • 0.151 mm (123)
  • 0.176 mm (121)
  • 0.2 mm (873)
  • 0.225 mm (70)
  • 0.25 mm (115)
  • 0.275 mm (79)
  • 0.301 mm (77)
  • 0.325 mm (96)
  • 0.351 mm (188)
  • 0.375 mm (19)
  • 0.4 mm (1030)
  • 0.426 mm (70)
  • 0.45 mm (80)
  • 0.476 mm (26)
  • 0.5 mm (106)
  • 0.525 mm (7)
  • 0.576 mm (83)
  • 0.601 mm (58)
  • 0.65 mm (3)
  • 0.701 mm (14)
  • 0.75 mm (58)
  • 0.775 mm (99)
  • 0.8 mm (1066)
  • 0.826 mm (5)
  • 0.851 mm (4)
  • 0.9 mm (80)
  • 0.925 mm (19)
  • 0.976 mm (3)
  • 1.0 mm (115)
  • 1.05 mm (8)
  • 1.201 mm (1079)
  • 1.25 mm (99)
  • 1.401 mm (5)
  • 1.5 mm (108)
  • 1.526 mm (13)
  • 1.576 mm (195)
  • 1.6 mm (913)
  • 1.75 mm (99)
  • 1.975 mm (54)
  • 2.0 mm (84)
  • 2.025 mm (4)
  • 2.25 mm (80)
  • 2.375 mm (179)
  • 2.401 mm (364)
  • 2.5 mm (28)
  • 2.526 mm (2)
  • 3.176 mm (55)
  • 3.2 mm (117)
  • 4.0 mm (29)
  • 4.775 mm (2)
  • 5.0 mm (3)
  • 6.0 mm (4)
  • 6.351 mm (11)
  • 8.0 mm (1)
  • 10.0 mm (3)
  • 12.5 mm (5)
  • 16.0 mm (4)
Corner Radius Min