Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

Notifications

Mark all as read

선삭

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (11227)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (11201)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (11201)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (11201)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (11202)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (11202)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (11226)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (11226)
  • M Stainless Steel (9329)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (9329)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (9329)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (9329)
  • K Cast Iron (9592)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (9552)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (9509)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (9189)
  • N Non-Ferrous Materials (7012)
    • N1
      Wrought Aluminum
      (6682)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (6549)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (2434)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (6993)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (6616)
    • N6
      Carbon, Graphite Composites, CFRP
      (6121)
    • N7
      MMC's
      (3484)
  • S High-Temp Alloys (9632)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (9419)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (9614)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (9432)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (8700)
  • H Hardened Materials (5672)
    • H1
      Hardened Materials 44-48 HRC
      (5672)
    • H2
      Hardened Materials 48-55 HRC
      (5363)
    • H3
      Hardened Materials 56-60 HRC
      (3699)
    • H4
      Hardened Materials >60 HRC
      (2831)
Select First Choice
  • BR (219)
  • CN (1356)
  • DE (1427)
  • GB (864)
  • IN (571)
  • SG (628)
  • US (1587)
Applications
Applications
  • Back Boring Back Boring (230)
  • Boring Boring (1467)
  • CRT Profiling CRT Profiling (81)
  • Chamfer Turning Chamfer Turning (175)
  • Cut-Off Cut-Off (1171)
  • Deep Grooving Deep Grooving (90)
  • Drilling Drilling (1)
  • Face Grooving Face Grooving (3193)
  • Facing Facing (1842)
  • Grooving Grooving (3492)
  • ID Facing ID Facing (499)
  • ID Grooving ID Grooving (2399)
  • ID Thread Turning ID Thread Turning (324)
  • Multiple Direction Cutting Multiple Direction Cutting (3076)
  • OD Thread Turning OD Thread Turning (129)
  • Plunge Turning Plunge Turning (2344)
  • Profiling Profiling (2418)
  • TRN Boring TRN Boring (1421)
  • Threading Threading (131)
  • Turning Turning (3614)
Cutting Length
Cutting Length
  • 26.0 mm (1)
  • 32.0 mm (3)
Cutting Length Min to Cutting Length Max
Type of Thread
Type of Thread
  • 55 (6)
  • 60 (204)
  • ACME (139)
  • API (127)
  • API BUTTRESS (2)
  • API RD (99)
  • BSPT (4)
  • BSW (92)
  • BUTTRESS (192)
  • M (128)
  • NPT (90)
  • NPTF (4)
  • RD DIN 405 (6)
  • STUB ACME (92)
  • TR DIN 103 (6)
  • UN (196)
  • UNJ (90)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (7445)
  • Interrupted (1589)
  • Lightly Interrupted Cut (8669)
  • Smooth Cut (11164)
  • Stable (4)
  • Unstable (4)
  • Varying Depth of Cut (8937)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (240)
  • 48.0 (8)
  • 49.783 (2)
  • 50.0 (24)
  • 60.0 (34)
  • 62.5 (42)
  • 63.0 (19)
  • 72.5 (27)
  • 75.0 (362)
  • 85.0 (14)
  • 90.0 (2069)
  • 90.25 (10)
  • 91.0 (7)
  • 92.0 (4)
  • 92.25 (26)
  • 93.0 (802)
  • 95.0 (1128)
  • 97.0 (8)
  • 97.5 (1)
  • 100.0 (1)
  • 105.0 (1)
  • 107.5 (149)
  • 117.5 (22)
  • 140.0 (4)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Bolt-On Head (214)
  • Boring Bar Shank (1078)
  • Cutoff Support Blade A1-A3 (80)
  • KM (496)
  • PSC (8)
  • Toolholder (2273)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 0.0 (5)
  • 1.0 (4379)
  • 2.0 (6115)
  • 3.0 (1256)
  • 4.0 (3651)
  • 6.0 (1095)
  • 8.0 (2177)
  • 16.0 (2)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.0 in (110)
  • 0.001 in (93)
  • 0.0015 in (439)
  • 0.002 in (159)
  • 0.0026 in (86)
  • 0.003 in (201)
  • 0.0031 in (159)
  • 0.0035 in (220)
  • 0.0037 in (86)
  • 0.004 in (2145)
  • 0.0046 in (86)
  • 0.005 in (271)
  • 0.0052 in (86)
  • 0.0053 in (86)
  • 0.0059 in (92)
  • 0.006 in (143)
  • 0.0062 in (86)
  • 0.0065 in (124)
  • 0.0068 in (86)
  • 0.007 in (222)
  • 0.0075 in (1010)
  • 0.0076 in (224)
  • 0.0078 in (101)
  • 0.0079 in (327)
  • 0.008 in (3579)
  • 0.0083 in (365)
  • 0.0088 in (86)
  • 0.0093 in (86)
  • 0.0099 in (86)
  • 0.01 in (188)
  • 0.0106 in (86)
  • 0.0111 in (86)
  • 0.0112 in (86)
  • 0.0118 in (118)
  • 0.012 in (377)
  • 0.0124 in (86)
  • 0.0125 in (211)
  • 0.013 in (248)
  • 0.0135 in (124)
  • 0.014 in (86)
  • 0.015 in (237)
  • 0.0156 in (4644)
  • 0.0157 in (600)
  • 0.0158 in (200)
  • 0.0159 in (86)
  • 0.016 in (2820)
  • 0.017 in (88)
  • 0.0175 in (124)
  • 0.0193 in (86)
  • 0.0197 in (224)
  • 0.02 in (102)
  • 0.0225 in (327)
  • 0.03 in (130)
  • 0.031 in (2830)
  • 0.0312 in (2396)
  • 0.0313 in (5351)
  • 0.0315 in (496)
  • 0.032 in (672)
  • 0.0355 in (124)
  • 0.039 in (190)
  • 0.0394 in (242)
  • 0.042 in (172)
  • 0.0468 in (180)
  • 0.0469 in (3539)
  • 0.047 in (2152)
  • 0.0472 in (119)
  • 0.0492 in (155)
  • 0.059 in (297)
  • 0.0591 in (245)
  • 0.062 in (303)
  • 0.0623 in (127)
  • 0.0625 in (2571)
  • 0.063 in (1691)
  • 0.065 in (231)
  • 0.0689 in (155)
  • 0.078 in (101)
  • 0.0787 in (133)
  • 0.079 in (236)
  • 0.081 in (189)
  • 0.0886 in (124)
  • 0.093 in (183)
  • 0.0938 in (1014)
  • 0.094 in (786)
  • 0.096 in (188)
  • 0.098 in (216)
  • 0.0984 in (87)
  • 0.101 in (178)
  • 0.118 in (173)
  • 0.121 in (138)
  • 0.125 in (500)
  • 0.126 in (191)
  • 0.127 in (131)
  • 0.128 in (132)
  • 0.1563 in (383)
  • 0.1575 in (137)
  • 0.1875 in (144)
  • 0.1969 in (109)
  • 0.25 in (220)
  • 0.312 in (163)
  • 0.787 in (109)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (110)
  • 0.03 mm (156)
  • 0.038 mm (439)
  • 0.05 mm (110)
  • 0.051 mm (131)
  • 0.066 mm (86)
  • 0.076 mm (201)
  • 0.08 mm (163)
  • 0.089 mm (166)
  • 0.09 mm (122)
  • 0.094 mm (86)
  • 0.1 mm (1968)
  • 0.102 mm (925)
  • 0.127 mm (87)
  • 0.131 mm (86)
  • 0.132 mm (86)
  • 0.133 mm (86)
  • 0.15 mm (142)
  • 0.152 mm (90)
  • 0.157 mm (86)
  • 0.165 mm (124)
  • 0.173 mm (86)
  • 0.178 mm (173)
  • 0.18 mm (127)
  • 0.185 mm (87)
  • 0.19 mm (409)
  • 0.191 mm (742)
  • 0.198 mm (86)
  • 0.2 mm (3503)
  • 0.202 mm (122)
  • 0.203 mm (1513)
  • 0.224 mm (86)
  • 0.235 mm (86)
  • 0.25 mm (133)
  • 0.251 mm (86)
  • 0.254 mm (177)
  • 0.269 mm (86)
  • 0.282 mm (86)
  • 0.3 mm (493)
  • 0.315 mm (152)
  • 0.318 mm (165)
  • 0.34 mm (248)
  • 0.38 mm (119)
  • 0.381 mm (90)
  • 0.397 mm (2387)
  • 0.4 mm (5320)
  • 0.406 mm (208)
  • 0.445 mm (124)
  • 0.5 mm (226)
  • 0.508 mm (90)
  • 0.572 mm (304)
  • 0.575 mm (94)
  • 0.6 mm (122)
  • 0.787 mm (239)
  • 0.79 mm (350)
  • 0.792 mm (521)
  • 0.794 mm (2571)
  • 0.8 mm (5985)
  • 0.902 mm (124)
  • 1.0 mm (431)
  • 1.06 mm (172)
  • 1.188 mm (180)
  • 1.19 mm (550)
  • 1.191 mm (1947)
  • 1.194 mm (203)
  • 1.2 mm (3555)
  • 1.25 mm (155)
  • 1.5 mm (475)
  • 1.56 mm (233)
  • 1.585 mm (100)
  • 1.587 mm (360)
  • 1.588 mm (1604)
  • 1.59 mm (325)
  • 1.6 mm (2233)
  • 1.65 mm (231)
  • 1.75 mm (155)
  • 1.981 mm (98)
  • 2.0 mm (380)
  • 2.06 mm (189)
  • 2.25 mm (124)
  • 2.37 mm (183)
  • 2.38 mm (387)
  • 2.381 mm (228)
  • 2.388 mm (165)
  • 2.4 mm (885)
  • 2.44 mm (188)
  • 2.5 mm (264)
  • 2.56 mm (178)
  • 3.0 mm (201)
  • 3.06 mm (138)
  • 3.17 mm (137)
  • 3.175 mm (204)
  • 3.18 mm (151)
  • 3.2 mm (339)
  • 3.24 mm (134)
  • 4.0 mm (177)
  • 4.7625 mm (126)
  • 5.0 mm (121)
  • 6.0 mm (117)
  • 6.35 mm (220)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (9667)
  • 0.66 mm (1)
  • 0.69 mm (1)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (9667)
  • 0.026 in (1)
  • 0.027 in (1)
Corner Chamfer Min to Corner Chamfer Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (2845)
  • Interrupted (8)
  • Lightly Interrupted Cut (3878)
  • Smooth Cut (6342)
  • Varying Depth of Cut (4163)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (1487)
  • CM2 (1426)
  • K090 (1806)
  • K10M (2041)
  • K10P (1822)
  • K10U (1789)
  • K15U (1755)
  • K20K (2012)
  • K25M (1769)
  • K25P (1739)
  • K313 (4677)
  • K420 (1862)
  • K68 (3180)
  • KB1610 (1662)
  • KB1630 (1497)
  • KB5625 (1761)
  • KB9610 (1857)
  • KBH10 (1684)
  • KBH20 (2062)
  • KC250 (1565)
  • KC5010 (4484)
  • KC5025 (4020)
  • KC5410 (2886)
  • KC5510 (1806)
  • KC720 (2555)
  • KC730 (3685)
  • KC7310 (2167)
  • KC732 (2484)
  • KC8050 (3113)
  • KC810 (3139)
  • KC850 (3660)
  • KC9010 (2434)
  • KC9025 (3017)
  • KC910 (3030)
  • KC9105 (2565)
  • KC9110 (3550)
  • KC9120 (2669)
  • KC9125 (3242)
  • KC9140 (1910)
  • KC9145 (1608)
  • KC9215 (1808)
  • KC9225 (2848)
  • KC9240 (2757)
  • KC9240NEW (2739)
  • KC9245 (1803)
  • KC9315 (3003)
  • KC9320 (2838)
  • KC9325 (2417)
  • KC935 (3333)
  • KC950 (2870)
  • KC990 (2703)
  • KCK05 (2791)
  • KCK05B (2111)
  • KCK15 (2606)
  • KCK15B (2799)
  • KCK20 (3279)
  • KCK20B (3950)
  • KCM15 (2723)
  • KCM15B (2440)
  • KCM25 (2986)
  • KCM25B (2725)
  • KCM35 (2297)
  • KCM35B (2271)
  • KCP05 (2588)
  • KCP05B (1493)
  • KCP10 (3528)
  • KCP10B (4402)
  • KCP25 (3713)
  • KCP25B (4688)
  • KCP30 (2808)
  • KCP30B (1761)
  • KCP40 (1668)
  • KCP40B (1786)
  • KCPK05 (1813)
  • KCS10 (1480)
  • KCS10B (2690)
  • KCU10 (5462)
  • KCU25 (5296)
  • KD050 (1651)
  • KD081 (1517)
  • KD120 (1567)
  • KD1400 (1778)
  • KD1425 (2068)
  • KT125 (1615)
  • KT175 (2236)
  • KT315 (3261)
  • KU10T (2450)
  • KU30T (3017)
  • KY1320 (1667)
  • KY1615 (1852)
  • KY3000 (1812)
  • KY3400 (1487)
  • KY3500 (2160)
  • KY4400 (1786)
  • KYHK15B (1947)
  • KYK25 (1432)
  • KYK35 (1786)
  • NL250 (1752)
  • NL920 (1555)
  • SP3019 (1454)
Hand Of Tool
Hand Of Tool
  • L (1697)
  • N (268)
  • N - Neutral (3)
  • R (2182)
Wiper Insert
Wiper Insert
  • N (13390)
  • Y (2071)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (147)
  • 4.57 mm (8)
  • 5.18 mm (8)
  • 5.28 mm (5)
  • 5.69 mm (4)
  • 5.79 mm (5)
  • 5.94 mm (9)
  • 7.09 mm (5)
  • 7.24 mm (14)
  • 7.42 mm (4)
  • 7.52 mm (5)
  • 9.04 mm (5)
  • 9.09 mm (5)
  • 10.54 mm (4)
  • 10.541 mm (8)
  • 11.0 mm (14)
  • 12.19 mm (15)
  • 12.192 mm (15)
  • 13.0 mm (31)
  • 15.24 mm (43)
  • 15.88 mm (4)
  • 16.0 mm (60)
  • 18.542 mm (12)
  • 19.558 mm (22)
  • 19.56 mm (20)
  • 20.0 mm (77)
  • 21.59 mm (10)
  • 22.86 mm (4)
  • 23.62 mm (19)
  • 23.622 mm (22)
  • 24.89 mm (5)
  • 24.892 mm (17)
  • 25.0 mm (102)
  • 25.4 mm (8)
  • 26.0 mm (11)
  • 30.0 mm (8)
  • 30.48 mm (43)
  • 30.99 mm (8)
  • 31.75 mm (6)
  • 32.0 mm (151)
  • 33.0 mm (6)
  • 33.02 mm (27)
  • 34.0 mm (4)
  • 34.925 mm (4)
  • 35.0 mm (8)
  • 36.0 mm (5)
  • 37.338 mm (11)
  • 37.34 mm (11)
  • 38.1 mm (8)
  • 40.0 mm (170)
  • 41.0 mm (4)
  • 41.3 mm (57)
  • 42.0 mm (5)
  • 43.307 mm (19)
  • 43.31 mm (7)
  • 44.0 mm (18)
  • 44.7 mm (9)
  • 44.704 mm (28)
  • 47.6 mm (56)
  • 48.0 mm (4)
  • 50.0 mm (202)
  • 50.8 mm (36)
  • 51.054 mm (11)
  • 52.0 mm (16)
  • 54.0 mm (34)
  • 55.0 mm (6)
  • 56.625 mm (49)
  • 57.15 mm (12)
  • 57.2 mm (29)
  • 58.0 mm (4)
  • 60.0 mm (72)
  • 60.325 mm (4)
  • 60.96 mm (34)
  • 63.0 mm (81)
  • 63.5 mm (36)
  • 70.0 mm (61)
  • 75.0 mm (59)
  • 76.2 mm (8)
  • 76.96 mm (5)
  • 76.962 mm (21)
  • 80.0 mm (62)
  • 82.55 mm (14)
  • 86.0 mm (68)
  • 88.9 mm (535)
  • 90.0 mm (14)
  • 100.0 mm (113)
  • 106.0 mm (31)
  • 120.0 mm (13)
  • 130.0 mm (6)
  • 139.7 mm (728)
  • 174.6 mm (125)
  • 180.0 mm (72)
  • 200.0 mm (8)
  • 209.6 mm (236)
  • 222.3 mm (58)
  • 250.0 mm (72)
  • 290.0 mm (7)
  • 350.0 mm (66)
  • 850.0 mm (6)
  • 2000.0 mm (6)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (147)
  • 0.18 in (8)
  • 0.204 in (8)
  • 0.208 in (5)
  • 0.224 in (4)
  • 0.228 in (8)
  • 0.234 in (9)
  • 0.279 in (5)
  • 0.285 in (14)
  • 0.296 in (6)
  • 0.356 in (6)
  • 0.358 in (5)
  • 0.415 in (12)
  • 0.433 in (8)
  • 0.4331 in (6)
  • 0.48 in (27)
  • 0.5118 in (22)
  • 0.512 in (9)
  • 0.6 in (43)
  • 0.6299 in (45)
  • 0.63 in (15)
  • 0.73 in (13)
  • 0.77 in (38)
  • 0.7701 in (5)
  • 0.787 in (23)
  • 0.7874 in (55)
  • 0.85 in (10)
  • 0.93 in (37)
  • 0.98 in (22)
  • 0.984 in (33)
  • 0.9843 in (70)
  • 1.0 in (8)
  • 1.0236 in (5)
  • 1.024 in (5)
  • 1.181 in (7)
  • 1.2 in (43)
  • 1.22 in (10)
  • 1.25 in (6)
  • 1.2598 in (101)
  • 1.26 in (50)
  • 1.3 in (27)
  • 1.375 in (6)
  • 1.378 in (8)
  • 1.4173 in (5)
  • 1.47 in (22)
  • 1.5 in (8)
  • 1.5748 in (105)
  • 1.575 in (65)
  • 1.626 in (57)
  • 1.6535 in (5)
  • 1.705 in (26)
  • 1.732 in (13)
  • 1.7323 in (5)
  • 1.76 in (37)
  • 1.874 in (56)
  • 1.9685 in (109)
  • 1.969 in (92)
  • 2.0 in (36)
  • 2.01 in (13)
  • 2.047 in (7)
  • 2.0472 in (9)
  • 2.126 in (34)
  • 2.229 in (49)
  • 2.25 in (12)
  • 2.252 in (29)
  • 2.362 in (50)
  • 2.3622 in (22)
  • 2.4 in (34)
  • 2.48 in (24)
  • 2.4803 in (58)
  • 2.5 in (36)
  • 2.7559 in (23)
  • 2.756 in (38)
  • 2.9528 in (7)
  • 2.953 in (52)
  • 3.0 in (8)
  • 3.03 in (26)
  • 3.1496 in (7)
  • 3.15 in (55)
  • 3.25 in (14)
  • 3.386 in (68)
  • 3.5 in (535)
  • 3.543 in (6)
  • 3.5433 in (8)
  • 3.937 in (113)
  • 4.173 in (31)
  • 4.7244 in (11)
  • 5.5 in (728)
  • 6.874 in (125)
  • 7.0866 in (5)
  • 7.087 in (67)
  • 7.874 in (8)
  • 8.252 in (236)
  • 8.752 in (58)
  • 9.8425 in (10)
  • 9.843 in (62)
  • 11.4173 in (7)
  • 13.78 in (63)
  • 33.4646 in (6)
  • 78.7402 in (6)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 0.787 in (28)
  • 0.7874 in (4)
  • 0.8268 in (3)
  • 0.9055 in (1)
  • 0.984 in (1)
  • 0.9843 in (4)
  • 1.0236 in (2)
  • 1.024 in (8)
  • 1.028 in (1)
  • 1.063 in (9)
  • 1.102 in (4)
  • 1.1024 in (3)
  • 1.181 in (3)
  • 1.1811 in (3)
  • 1.185 in (1)
  • 1.26 in (40)
  • 1.3386 in (5)
  • 1.339 in (3)
  • 1.378 in (11)
  • 1.417 in (1)
  • 1.4173 in (12)
  • 1.4961 in (1)
  • 1.575 in (8)
  • 1.618 in (1)
  • 1.654 in (37)
  • 1.811 in (1)
  • 1.8898 in (4)
  • 1.9685 in (1)
  • 1.969 in (19)