홈가공 및 절단

필터 선택
Filters
필터 보기 위치
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (3825)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (3825)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (3825)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (3825)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (3825)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (3825)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (3825)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (3825)
  • M Stainless Steel (3393)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (3393)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (3393)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (3393)
  • K Cast Iron (3556)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (3556)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (3536)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (3524)
  • N Non-Ferrous Materials (3332)
    • N1
      Wrought Aluminum (3324)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (3131)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (404)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (3332)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (3139)
    • N6
      Carbon, Graphite Composites, CFRP (3131)
    • N7
      MMC's (396)
  • S High-Temp Alloys (3591)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (3591)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (3591)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (3591)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (3560)
  • H Hardened Materials (2109)
    • H1
      Hardened Materials 44-48 HRC (2109)
    • H2
      Hardened Materials 48-55 HRC (1864)
    • H3
      Hardened Materials 56-60 HRC (390)
    • H4
      Hardened Materials >60 HRC (390)
1차 선택 선택
  • BR (62)
  • CN (461)
  • DE (488)
  • GB (277)
  • IN (134)
  • SG (227)
  • US (584)
Applications
Applications
  • Back Boring Back Boring (421)
  • Boring Boring (1887)
  • CRT Profiling CRT Profiling (2)
  • Chamfer Turning Chamfer Turning (52)
  • Cut-Off Cut-Off (1398)
  • Deep Grooving Deep Grooving (124)
  • Drilling Drilling (1)
  • Face Grooving Face Grooving (3353)
  • Facing Facing (536)
  • Grooving Grooving (3719)
  • ID Facing ID Facing (436)
  • ID Grooving ID Grooving (2512)
  • ID Thread Turning ID Thread Turning (69)
  • Multiple Direction Cutting Multiple Direction Cutting (552)
  • OD Thread Turning OD Thread Turning (127)
  • Plunge Turning Plunge Turning (2424)
  • Profiling Profiling (740)
  • TRN Boring TRN Boring (44)
  • Threading Threading (130)
  • Turning Turning (1781)
Cutting Length
Cutting Length
  • 26.0 mm (1)
  • 32.0 mm (3)
Cutting Length Min 받는 사람 Cutting Length Max
Cutting Length
Cutting Length
  • 1.024 in (1)
  • 1.26 in (3)
Cutting Length Min 받는 사람 Cutting Length Max
Type of Thread
Type of Thread
  • 60 (187)
  • ACME (122)
  • API (114)
  • API RD (86)
  • BSW (78)
  • BUTTRESS (182)
  • M (114)
  • NPT (78)
  • STUB ACME (78)
  • UN (182)
  • UNJ (78)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (3103)
  • Lightly Interrupted Cut (3256)
  • Smooth Cut (3756)
  • Varying Depth of Cut (3559)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (20)
  • 90.0 (1459)
  • 92.25 (27)
Tool Cutting Edge Angle Min 받는 사람 Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Bolt-On Head (6)
  • Boring Bar Shank (186)
  • Cutoff Support Blade A1-A3 (81)
  • Toolholder (803)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (1950)
  • 2.0 (2334)
Cutting Edges Per Insert Min 받는 사람 Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 0.795 in (1)
  • 0.992 in (2)
  • 1.625 in (6)
  • 1.881 in (46)
  • 1.954 in (4)
  • 2.037 in (40)
  • 2.077 in (31)
  • 2.111 in (36)
  • 2.156 in (50)
  • 2.165 in (1)
  • 2.19 in (2)
  • 2.192 in (1)
  • 2.195 in (50)
  • 2.269 in (20)
  • 2.274 in (2)
  • 2.343 in (1)
  • 2.347 in (5)
  • 2.352 in (15)
  • 2.431 in (30)
  • 2.5 in (4)
  • 2.584 in (3)
  • 2.668 in (20)
  • 2.757 in (2)
  • 2.953 in (1)
  • 3.15 in (2)
  • 3.386 in (8)
  • 3.396 in (2)
  • 3.5 in (4)
  • 3.543 in (5)
  • 3.551 in (2)
  • 3.553 in (4)
  • 3.938 in (4)
  • 3.946 in (1)
  • 4.0 in (3)
  • 4.331 in (7)
  • 4.339 in (2)
  • 4.341 in (29)
  • 4.343 in (1)
  • 4.5 in (139)
  • 4.921 in (181)
  • 4.931 in (8)
  • 4.933 in (12)
  • 5.0 in (36)
  • 5.315 in (2)
  • 5.327 in (2)
  • 5.348 in (2)
  • 5.372 in (4)
  • 5.394 in (4)
  • 5.463 in (4)
  • 5.508 in (12)
  • 5.906 in (205)
  • 5.912 in (1)
  • 5.913 in (3)
  • 5.915 in (20)
  • 5.917 in (6)
  • 5.961 in (10)
  • 6.0 in (275)
  • 6.114 in (2)
  • 6.136 in (2)
  • 6.25 in (4)
  • 6.372 in (2)
  • 6.394 in (2)
  • 6.694 in (63)
  • 6.703 in (4)
  • 7.0 in (15)
  • 7.079 in (2)
  • 7.087 in (12)
  • 7.875 in (42)
  • 7.931 in (7)
  • 7.976 in (1)
  • 8.0 in (5)
  • 8.012 in (4)
  • 8.019 in (6)
  • 8.02 in (4)
  • 9.843 in (20)
  • 9.879 in (1)
  • 10.0 in (8)
  • 10.02 in (3)
  • 10.025 in (1)
  • 10.236 in (2)
  • 10.242 in (1)
  • 11.811 in (14)
  • 12.0 in (9)
  • 12.02 in (3)
  • 12.025 in (2)
  • 13.781 in (1)
  • 14.0 in (10)
  • 16.0 in (10)
Over All Length [L] Min 받는 사람 Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 20.201 mm (1)
  • 25.201 mm (2)
  • 41.276 mm (6)
  • 47.75 mm (46)
  • 49.625 mm (4)
  • 51.75 mm (40)
  • 52.75 mm (31)
  • 53.625 mm (36)
  • 54.75 mm (50)
  • 55.0 mm (1)
  • 55.625 mm (2)
  • 55.676 mm (1)
  • 55.75 mm (50)
  • 57.625 mm (20)
  • 57.75 mm (2)
  • 59.5 mm (1)
  • 59.625 mm (5)
  • 59.75 mm (15)
  • 61.75 mm (30)
  • 63.5 mm (4)
  • 65.625 mm (3)
  • 67.75 mm (20)
  • 70.0 mm (2)
  • 75.0 mm (1)
  • 80.0 mm (2)
  • 86.0 mm (8)
  • 86.25 mm (2)
  • 88.9 mm (4)
  • 90.0 mm (5)
  • 90.2 mm (2)
  • 90.25 mm (4)
  • 100.0 mm (4)
  • 100.2 mm (1)
  • 101.601 mm (3)
  • 110.0 mm (7)
  • 110.2 mm (2)
  • 110.25 mm (29)
  • 110.301 mm (1)
  • 114.301 mm (139)
  • 125.0 mm (181)
  • 125.25 mm (8)
  • 125.301 mm (12)
  • 127.0 mm (36)
  • 135.0 mm (2)
  • 135.3 mm (2)
  • 135.85 mm (2)
  • 136.451 mm (4)
  • 137.0 mm (4)
  • 138.75 mm (4)
  • 139.9 mm (12)
  • 150.0 mm (205)
  • 150.15 mm (1)
  • 150.201 mm (3)
  • 150.25 mm (20)
  • 150.3 mm (6)
  • 151.4 mm (10)
  • 152.4 mm (275)
  • 155.3 mm (2)
  • 155.851 mm (2)
  • 158.75 mm (4)
  • 161.851 mm (2)
  • 162.4 mm (2)
  • 170.0 mm (63)
  • 170.25 mm (4)
  • 177.8 mm (15)
  • 179.8 mm (2)
  • 180.0 mm (12)
  • 200.0 mm (42)
  • 201.451 mm (7)
  • 202.601 mm (1)
  • 203.201 mm (5)
  • 203.5 mm (4)
  • 203.675 mm (6)
  • 203.701 mm (4)
  • 250.0 mm (20)
  • 250.925 mm (1)
  • 254.0 mm (8)
  • 254.5 mm (3)
  • 254.601 mm (1)
  • 260.0 mm (2)
  • 260.151 mm (1)
  • 300.0 mm (14)
  • 304.8 mm (9)
  • 305.3 mm (3)
  • 305.401 mm (2)
  • 350.0 mm (1)
  • 355.6 mm (10)
  • 406.401 mm (10)
Over All Length [L] Min 받는 사람 Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.0 in (27)
  • 0.002 in (78)
  • 0.003 in (192)
  • 0.004 in (318)
  • 0.005 in (78)
  • 0.006 in (170)
  • 0.007 in (201)
  • 0.008 in (2053)
  • 0.01 in (178)
  • 0.011 in (78)
  • 0.012 in (432)
  • 0.014 in (201)
  • 0.015 in (2)
  • 0.016 in (1367)
  • 0.017 in (78)
  • 0.019 in (114)
  • 0.02 in (157)
  • 0.023 in (317)
  • 0.03 in (70)
  • 0.031 in (1120)
  • 0.033 in (13)
  • 0.034 in (63)
  • 0.035 in (114)
  • 0.039 in (338)
  • 0.041 in (172)
  • 0.046 in (30)
  • 0.047 in (483)
  • 0.048 in (22)
  • 0.049 in (147)
  • 0.06 in (490)
  • 0.061 in (233)
  • 0.062 in (92)
  • 0.063 in (571)
  • 0.065 in (231)
  • 0.069 in (147)
  • 0.078 in (93)
  • 0.079 in (371)
  • 0.08 in (70)
  • 0.081 in (189)
  • 0.089 in (114)
  • 0.094 in (255)
  • 0.095 in (159)
  • 0.096 in (188)
  • 0.098 in (274)
  • 0.099 in (61)
  • 0.1 in (178)
  • 0.109 in (1)
  • 0.119 in (194)
  • 0.12 in (198)
  • 0.125 in (264)
  • 0.128 in (134)
  • 0.156 in (56)
  • 0.157 in (56)
  • 0.158 in (60)
  • 0.159 in (37)
  • 0.187 in (12)
  • 0.188 in (13)
  • 0.197 in (14)
  • 0.198 in (16)
Corner Radius Min 받는 사람 Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (27)
  • 0.05 mm (78)
  • 0.076 mm (192)
  • 0.1 mm (318)
  • 0.125 mm (78)
  • 0.151 mm (170)
  • 0.176 mm (201)
  • 0.2 mm (2053)
  • 0.225 mm (78)
  • 0.25 mm (178)
  • 0.275 mm (78)
  • 0.301 mm (432)
  • 0.325 mm (201)
  • 0.351 mm (114)
  • 0.375 mm (2)
  • 0.4 mm (1367)
  • 0.426 mm (78)
  • 0.45 mm (114)
  • 0.476 mm (40)
  • 0.5 mm (157)
  • 0.576 mm (317)
  • 0.75 mm (70)
  • 0.775 mm (209)
  • 0.8 mm (911)
  • 0.826 mm (13)
  • 0.851 mm (63)
  • 0.9 mm (114)
  • 1.0 mm (338)
  • 1.05 mm (172)
  • 1.175 mm (30)
  • 1.201 mm (483)
  • 1.225 mm (22)
  • 1.25 mm (147)
  • 1.5 mm (482)
  • 1.526 mm (89)
  • 1.55 mm (233)
  • 1.576 mm (92)
  • 1.6 mm (571)
  • 1.651 mm (231)
  • 1.75 mm (147)
  • 1.975 mm (93)
  • 2.0 mm (371)
  • 2.025 mm (70)
  • 2.051 mm (189)
  • 2.25 mm (114)
  • 2.375 mm (255)
  • 2.401 mm (159)
  • 2.45 mm (188)
  • 2.5 mm (274)
  • 2.526 mm (61)
  • 2.551 mm (178)
  • 2.776 mm (1)
  • 3.0 mm (194)
  • 3.026 mm (60)
  • 3.051 mm (138)
  • 3.176 mm (264)
  • 3.25 mm (134)
  • 3.95 mm (35)
  • 3.975 mm (21)
  • 4.0 mm (56)
  • 4.025 mm (60)
  • 4.05 mm (37)
  • 4.75 mm (12)
  • 4.775 mm (13)
  • 5.0 mm (14)
  • 5.025 mm (16)
Corner Radius Min 받는 사람 Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (3136)
Corner Chamfer Min 받는 사람 Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (3136)
Corner Chamfer Min 받는 사람 Corner Chamfer Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K1 (5)
  • K1025 (136)
  • K2885 (146)
  • K313 (1492)
  • K420 (216)
  • K4H (110)
  • K68 (303)
  • KB1345 (114)
  • KB1630 (384)
  • KB5625 (328)
  • KBH20 (296)
  • KC250 (151)
  • KC5010 (765)
  • KC5025 (883)
  • KC5410 (186)
  • KC710 (182)
  • KC720 (213)
  • KC722 (182)
  • KC730 (417)
  • KC732 (78)
  • KC810 (198)
  • KC850 (340)
  • KC910 (110)
  • KC9110 (520)
  • KC9120 (78)
  • KC9125 (338)
  • KC9320 (182)
  • KC935 (182)
  • KC950 (182)
  • KCK20 (440)
  • KCK20B (1125)
  • KCM35B (727)
  • KCP10 (370)
  • KCP10B (1187)
  • KCP25 (372)
  • KCP25B (1243)
  • KCU10 (1851)
  • KCU10B (1273)
  • KCU25 (2177)
  • KD050 (40)
  • KD081 (78)
  • KD100 (97)
  • KD120 (114)
  • KD1405 (201)
  • KD1425 (86)
  • KMF (31)
  • KMS (134)
  • KT175 (146)
  • KT315 (541)
  • KU10 (337)
  • KU10T (182)
  • KU25T (182)
  • KU30T (432)
  • KY3000 (114)