Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

Notifications

Mark all as read

Tool Holders & Adapters

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (1781)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1777)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1777)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1777)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1777)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1777)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (1781)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (1781)
  • M Stainless Steel (1781)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1781)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (1781)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (1781)
  • K Cast Iron (1803)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1803)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1803)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (1801)
  • N Non-Ferrous Materials (1728)
    • N1
      Wrought Aluminum
      (1706)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1702)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (1145)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (1707)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (1690)
    • N6
      Carbon, Graphite Composites, CFRP
      (1583)
    • N7
      MMC's
      (1608)
  • S High-Temp Alloys (1802)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (1800)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (1802)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (1800)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (1775)
  • H Hardened Materials (1588)
    • H1
      Hardened Materials 44-48 HRC
      (1588)
    • H2
      Hardened Materials 48-55 HRC
      (1467)
    • H3
      Hardened Materials 56-60 HRC
      (1352)
    • H4
      Hardened Materials >60 HRC
      (1291)
  • C CFRP Materials (5)
    • C1
      CFRP, CFRP / CFRP
      (5)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous
      (5)
Select First Choice
  • BR (2)
  • CN (40)
  • DE (165)
  • GB (92)
  • IN (47)
  • SG (27)
  • US (351)
Applications
Applications
  • Back Boring Back Boring (1)
  • Chamfer Turning Chamfer Turning (61)
  • Convex Drilling Convex Drilling (7)
  • Countersinking Countersinking (3)
  • Cut-Off Cut-Off (45)
  • Deep Grooving Deep Grooving (61)
  • Drilling Drilling (7)
  • Face Grooving Face Grooving (47)
  • Facing Facing (1082)
  • Grooving Grooving (200)
  • ID Facing ID Facing (258)
  • ID Grooving ID Grooving (111)
  • ID Thread Turning ID Thread Turning (175)
  • Inclined Entry Drilling Inclined Entry Drilling (7)
  • Inclined Exit Drilling Inclined Exit Drilling (7)
  • Multiple Direction Cutting Multiple Direction Cutting (1213)
  • OD Thread Turning OD Thread Turning (191)
  • Plunge Turning Plunge Turning (123)
  • Profiling Profiling (852)
  • TRN Boring TRN Boring (1009)
  • Threading Threading (203)
  • Turning Turning (1339)
  • X-Offset Drilling X-Offset Drilling (7)
Cutting Diameter
Cutting Diameter
  • 0.1901 in (1)
  • 0.25 in (1)
  • 0.375 in (1)
  • 0.625 in (1)
  • 0.6875 in (1)
  • 0.75 in (1)
  • 0.8125 in (1)
  • 0.875 in (1)
  • 0.9375 in (1)
  • 1.0 in (1)
  • 1.063 in (1)
  • 1.125 in (1)
  • 1.1417 in (1)
  • 1.2205 in (1)
  • 1.25 in (1)
  • 1.375 in (1)
  • 1.5 in (1)
  • 1.625 in (1)
  • 1.75 in (1)
  • 1.875 in (1)
  • 2.0 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 4.828 mm (1)
  • 6.35 mm (1)
  • 9.525 mm (1)
  • 15.875 mm (1)
  • 17.462 mm (1)
  • 19.05 mm (1)
  • 20.638 mm (1)
  • 22.225 mm (1)
  • 23.812 mm (1)
  • 25.4 mm (1)
  • 27.0 mm (1)
  • 28.575 mm (1)
  • 29.0 mm (1)
  • 31.0 mm (1)
  • 31.75 mm (1)
  • 34.925 mm (1)
  • 38.1 mm (1)
  • 41.275 mm (1)
  • 44.45 mm (1)
  • 47.625 mm (1)
  • 50.8 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Type of Thread
Type of Thread
  • 55 (105)
  • 60 (280)
  • ACME (230)
  • API (158)
  • API BUTTRESS (27)
  • API RD (161)
  • BSPT (78)
  • BSW (189)
  • BUTTRESS (175)
  • M (214)
  • NPT (162)
  • NPTF (78)
  • RD DIN 405 (100)
  • STUB ACME (184)
  • TR DIN 103 (100)
  • UN (253)
  • UNJ (162)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (1601)
  • Interrupted (902)
  • Lightly Interrupted Cut (1601)
  • Smooth Cut (1603)
  • Varying Depth of Cut (1603)
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 47.625 mm (1)
  • 52.388 mm (1)
  • 57.15 mm (1)
  • 61.912 mm (1)
  • 66.675 mm (1)
  • 71.438 mm (1)
  • 76.2 mm (1)
  • 81.0 mm (1)
  • 85.725 mm (1)
  • 87.0 mm (1)
  • 93.0 mm (1)
  • 95.25 mm (1)
  • 104.775 mm (1)
  • 114.3 mm (1)
  • 123.825 mm (1)
  • 133.35 mm (1)
  • 142.875 mm (1)
  • 152.4 mm (1)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 1.875 in (1)
  • 2.0625 in (1)
  • 2.25 in (1)
  • 2.4375 in (1)
  • 2.625 in (1)
  • 2.8125 in (1)
  • 3.0 in (1)
  • 3.189 in (1)
  • 3.375 in (1)
  • 3.4252 in (1)
  • 3.6614 in (1)
  • 3.75 in (1)
  • 4.125 in (1)
  • 4.5 in (1)
  • 4.875 in (1)
  • 5.25 in (1)
  • 5.625 in (1)
  • 6.0 in (1)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 2.5197 in (1)
  • 2.8346 in (1)
  • 2.9921 in (1)
  • 3.189 in (1)
  • 3.3858 in (1)
  • 3.5433 in (1)
  • 3.7402 in (1)
  • 3.7795 in (1)
  • 4.0551 in (1)
  • 4.2126 in (1)
  • 4.3307 in (1)
  • 4.6063 in (1)
  • 5.0787 in (1)
  • 5.4724 in (1)
  • 6.2205 in (1)
  • 6.5748 in (1)
  • 7.1654 in (1)
  • 7.5197 in (1)
Reach Min to Reach Max
Reach
Reach
  • 64.0 mm (1)
  • 72.0 mm (1)
  • 76.0 mm (1)
  • 81.0 mm (1)
  • 86.0 mm (1)
  • 90.0 mm (1)
  • 95.0 mm (1)
  • 96.0 mm (1)
  • 103.0 mm (1)
  • 107.0 mm (1)
  • 110.0 mm (1)
  • 117.0 mm (1)
  • 129.0 mm (1)
  • 139.0 mm (1)
  • 158.0 mm (1)
  • 167.0 mm (1)
  • 182.0 mm (1)
  • 191.0 mm (1)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 0.0 (2)
  • 45.0 (80)
  • 48.0 (19)
  • 49.683 (2)
  • 49.783 (3)
  • 50.0 (5)
  • 61.0 (2)
  • 62.5 (23)
  • 63.0 (8)
  • 72.5 (7)
  • 75.0 (178)
  • 85.0 (4)
  • 90.0 (484)
  • 93.0 (454)
  • 95.0 (456)
  • 107.5 (113)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Cutoff Support Blade A1-A3 (3)
  • KM (1067)
  • PSC (169)
  • Straight-Cylindrical (3)
Number of Flutes
Number of Flutes
  • 1 (3)
  • 2 (18)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (1144)
  • 2.0 (1231)
  • 3.0 (316)
  • 4.0 (1000)
  • 6.0 (157)
  • 8.0 (570)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.001 in (43)
  • 0.0011 in (18)
  • 0.0012 in (23)
  • 0.0015 in (184)
  • 0.002 in (118)
  • 0.0023 in (44)
  • 0.0026 in (84)
  • 0.0028 in (58)
  • 0.003 in (229)
  • 0.0031 in (149)
  • 0.0032 in (39)
  • 0.0033 in (16)
  • 0.0034 in (16)
  • 0.0035 in (49)
  • 0.0037 in (84)
  • 0.0038 in (67)
  • 0.004 in (1058)
  • 0.0043 in (23)
  • 0.0046 in (84)
  • 0.005 in (89)
  • 0.0052 in (84)
  • 0.0053 in (100)
  • 0.0059 in (87)
  • 0.006 in (127)
  • 0.0062 in (84)
  • 0.0063 in (39)
  • 0.0065 in (126)
  • 0.0068 in (84)
  • 0.007 in (106)
  • 0.0075 in (175)
  • 0.0078 in (127)
  • 0.0079 in (83)
  • 0.008 in (1040)
  • 0.0083 in (235)
  • 0.0088 in (100)
  • 0.0093 in (84)
  • 0.0096 in (40)
  • 0.0099 in (84)
  • 0.01 in (151)
  • 0.0106 in (100)
  • 0.011 in (31)
  • 0.0111 in (84)
  • 0.0112 in (84)
  • 0.0118 in (84)
  • 0.0124 in (84)
  • 0.0125 in (149)
  • 0.013 in (244)
  • 0.0135 in (126)
  • 0.014 in (84)
  • 0.015 in (28)
  • 0.0155 in (23)
  • 0.0156 in (1232)
  • 0.0157 in (23)
  • 0.0158 in (43)
  • 0.0159 in (84)
  • 0.016 in (927)
  • 0.017 in (111)
  • 0.0175 in (126)
  • 0.0186 in (40)
  • 0.0193 in (84)
  • 0.0197 in (54)
  • 0.02 in (89)
  • 0.022 in (19)
  • 0.0225 in (133)
  • 0.0276 in (23)
  • 0.0295 in (49)
  • 0.031 in (1110)
  • 0.0311 in (27)
  • 0.0312 in (1122)
  • 0.0313 in (1369)
  • 0.0315 in (303)
  • 0.0355 in (126)
  • 0.0369 in (23)
  • 0.0394 in (138)
  • 0.0468 in (109)
  • 0.0469 in (1279)
  • 0.047 in (1062)
  • 0.0472 in (222)
  • 0.0492 in (133)
  • 0.0516 in (69)
  • 0.0591 in (142)
  • 0.0623 in (66)
  • 0.0625 in (1191)
  • 0.063 in (769)
  • 0.0689 in (133)
  • 0.078 in (84)
  • 0.0787 in (126)
  • 0.0886 in (126)
  • 0.0938 in (487)
  • 0.094 in (334)
  • 0.0984 in (44)
  • 0.106 in (44)
  • 0.125 in (100)
  • 0.126 in (106)
  • 0.1563 in (201)
  • 0.1575 in (41)
  • 0.1969 in (33)
  • 0.236 in (33)
  • 0.2362 in (33)
  • 0.312 in (160)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.03 mm (84)
  • 0.038 mm (184)
  • 0.051 mm (118)
  • 0.057 mm (44)
  • 0.066 mm (84)
  • 0.07 mm (42)
  • 0.076 mm (229)
  • 0.08 mm (172)
  • 0.089 mm (49)
  • 0.09 mm (49)
  • 0.094 mm (84)
  • 0.097 mm (67)
  • 0.1 mm (891)
  • 0.102 mm (639)
  • 0.116 mm (40)
  • 0.117 mm (44)
  • 0.127 mm (84)
  • 0.131 mm (84)
  • 0.132 mm (84)
  • 0.133 mm (84)
  • 0.15 mm (87)
  • 0.152 mm (126)
  • 0.157 mm (84)
  • 0.16 mm (65)
  • 0.165 mm (126)
  • 0.173 mm (84)
  • 0.178 mm (106)
  • 0.19 mm (175)
  • 0.191 mm (175)
  • 0.198 mm (84)
  • 0.2 mm (984)
  • 0.202 mm (109)
  • 0.203 mm (588)
  • 0.21 mm (42)
  • 0.224 mm (84)
  • 0.235 mm (84)
  • 0.244 mm (40)
  • 0.25 mm (109)
  • 0.251 mm (84)
  • 0.254 mm (151)
  • 0.269 mm (100)
  • 0.282 mm (84)
  • 0.284 mm (84)
  • 0.3 mm (86)
  • 0.315 mm (104)
  • 0.318 mm (149)
  • 0.33 mm (84)
  • 0.34 mm (244)
  • 0.343 mm (42)
  • 0.356 mm (84)
  • 0.397 mm (1072)
  • 0.4 mm (1246)
  • 0.404 mm (84)
  • 0.406 mm (117)
  • 0.43 mm (84)
  • 0.445 mm (126)
  • 0.472 mm (40)
  • 0.49 mm (84)
  • 0.5 mm (54)
  • 0.508 mm (84)
  • 0.57 mm (44)
  • 0.572 mm (133)
  • 0.575 mm (82)
  • 0.6 mm (75)
  • 0.75 mm (49)
  • 0.787 mm (133)
  • 0.79 mm (83)
  • 0.792 mm (353)
  • 0.794 mm (1062)
  • 0.8 mm (1375)
  • 0.902 mm (126)
  • 1.0 mm (146)
  • 1.188 mm (109)
  • 1.19 mm (205)
  • 1.191 mm (987)
  • 1.194 mm (133)
  • 1.195 mm (44)
  • 1.2 mm (1279)
  • 1.25 mm (133)
  • 1.5 mm (142)
  • 1.585 mm (84)
  • 1.587 mm (193)
  • 1.588 mm (862)
  • 1.6 mm (1014)
  • 1.75 mm (133)
  • 1.98 mm (44)
  • 1.981 mm (84)
  • 2.0 mm (130)
  • 2.25 mm (126)
  • 2.38 mm (70)
  • 2.381 mm (158)
  • 2.388 mm (126)
  • 2.4 mm (357)
  • 2.5 mm (44)
  • 3.175 mm (42)
  • 3.18 mm (55)
  • 3.2 mm (164)
  • 4.0 mm (41)
  • 5.0 mm (33)
  • 6.0 mm (33)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (2)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (2)
Corner Chamfer Min to Corner Chamfer Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Interrupted (18)
  • Stable (18)
  • Unstable (18)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K10M (1077)
  • K10P (970)
  • K10U (926)
  • K15U (917)
  • K20K (1066)
  • K25M (965)
  • K25P (954)
  • K313 (1545)
  • K420 (961)
  • K68 (1443)
  • KB9610 (923)
  • KBH20 (938)
  • KC5010 (1684)
  • KC5025 (1667)
  • KC5410 (1401)
  • KC5510 (998)
  • KC720 (1301)
  • KC730 (1452)
  • KC7310 (1072)
  • KC732 (1071)
  • KC8050 (1408)
  • KC810 (1540)
  • KC850 (1588)
  • KC9010 (1160)
  • KC9025 (1378)
  • KC910 (1398)
  • KC9105 (1253)
  • KC9110 (1606)
  • KC9120 (1345)
  • KC9125 (1431)
  • KC9140 (1056)
  • KC9145 (946)
  • KC9215 (1009)
  • KC9225 (1336)
  • KC9240 (1335)
  • KC9240NEW (1321)
  • KC9245 (1010)
  • KC9315 (1369)
  • KC9320 (1447)
  • KC9325 (1201)
  • KC935 (1540)
  • KC950 (1401)
  • KC990 (1242)
  • KCK05 (1333)
  • KCK05B (1137)
  • KCK15 (1250)
  • KCK15B (1315)
  • KCK20 (1467)
  • KCK20B (1489)
  • KCM15 (1272)
  • KCM15B (1201)
  • KCM25 (1368)
  • KCM25B (1268)
  • KCM35 (1155)
  • KCP05 (1209)
  • KCP10 (1424)
  • KCP10B (1549)
  • KCP25 (1442)
  • KCP25B (1570)
  • KCP30 (1333)
  • KCP30B (978)
  • KCP40 (913)
  • KCP40B (990)
  • KCPK05 (989)
  • KCS10B (1239)
  • KCU10 (1602)
  • KCU25 (1565)
  • KT175 (1045)
  • KT315 (1368)
  • KU10T (1264)
  • KU30T (1456)
  • KY1320 (920)
  • KY3000 (1002)
  • KY3500 (977)
  • KYK35 (960)
  • NL250 (992)
  • TN10P (1163)
  • TN15M (1012)
  • TN20K (1047)
  • TN20P (1112)
  • TN30M (1063)
  • TN5015 (970)
  • TN5120 (991)
  • TN7010 (1029)
  • TN7015 (1064)
  • TN7025 (1057)
  • TN7110 (1132)
  • TN7115 (1024)
  • TN7125 (943)
  • TN8025 (972)
  • WK05CT (1039)
  • WK20CT (1169)
  • WM15CT (1142)
  • WM25CT (1154)
  • WP15CT (1199)
  • WP25CT (1225)
  • WP35CT (1101)
  • WS10PT (995)
  • WS25PT (1001)
  • WU10HT (1066)
Hand Of Tool
Hand Of Tool
  • L (557)
  • N (69)
  • N - Neutral (3)
  • R (613)
Wiper Insert
Wiper Insert
  • N (1792)
  • Y (962)
Drill Type
Drill Type
  • 86-01 (18)
  • 86-09 (3)
Bore Diameter [D1]
Bore Diameter [D1]
  • 1.0 mm (5)
  • 1.5 mm (6)
  • 1.588 mm (5)
  • 1.984 mm (2)
  • 2.0 mm (7)
  • 2.381 mm (2)
  • 2.383 mm (2)
  • 2.388 mm (2)
  • 2.5 mm (6)
  • 2.779 mm (2)
  • 3.0 mm (16)
  • 3.175 mm (18)
  • 3.5 mm (6)
  • 3.571 mm (2)
  • 3.581 mm (8)
  • 3.962 mm (2)
  • 3.969 mm (5)
  • 3.97 mm (5)
  • 4.0 mm (17)
  • 4.267 mm (9)
  • 4.366 mm (3)
  • 4.369 mm (3)
  • 4.5 mm (9)
  • 4.762 mm (2)
  • 4.763 mm (13)
  • 4.775 mm (3)
  • 4.928 mm (12)
  • 5.0 mm (18)
  • 5.156 mm (2)
  • 5.159 mm (4)
  • 5.5 mm (7)
  • 5.556 mm (5)
  • 5.558 mm (3)
  • 5.563 mm (2)
  • 5.588 mm (7)
  • 5.944 mm (3)
  • 5.954 mm (2)
  • 6.0 mm (33)
  • 6.35 mm (21)
  • 6.477 mm (15)
  • 6.5 mm (4)
  • 6.746 mm (2)
  • 6.756 mm (3)
  • 7.0 mm (20)
  • 7.137 mm (3)
  • 7.144 mm (5)
  • 7.145 mm (2)
  • 7.925 mm (4)
  • 7.938 mm (16)
  • 8.0 mm (31)
  • 8.077 mm (13)
  • 8.204 mm (8)
  • 8.331 mm (3)
  • 8.5 mm (3)
  • 8.731 mm (5)
  • 8.738 mm (3)
  • 9.0 mm (17)
  • 9.129 mm (3)
  • 9.322 mm (15)
  • 9.525 mm (20)
  • 9.677 mm (14)
  • 10.0 mm (30)
  • 10.312 mm (3)
  • 10.319 mm (5)
  • 10.719 mm (3)
  • 10.897 mm (8)
  • 11.0 mm (14)
  • 11.113 mm (14)
  • 11.125 mm (4)
  • 11.506 mm (3)
  • 11.906 mm (4)
  • 12.0 mm (26)
  • 12.192 mm (11)
  • 12.7 mm (19)
  • 13.0 mm (8)
  • 13.487 mm (3)
  • 13.494 mm (3)
  • 13.767 mm (5)
  • 14.0 mm (18)
  • 14.275 mm (3)
  • 14.288 mm (14)
  • 14.986 mm (6)
  • 15.0 mm (6)
  • 15.081 mm (3)
  • 15.875 mm (15)
  • 16.0 mm (21)
  • 16.561 mm (5)
  • 17.0 mm (3)
  • 17.463 mm (8)
  • 17.704 mm (4)
  • 18.0 mm (14)
  • 19.0 mm (3)
  • 19.05 mm (11)
  • 20.0 mm (15)
  • 20.32 mm (3)
  • 20.638 mm (3)
  • 22.0 mm (4)
  • 22.225 mm (7)
  • 25.0 mm (7)
  • 25.4 mm (7)
Bore Diameter [D1] Min to Bore Diameter [D1] Max