환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

Kennametal 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

빠른 주문
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기
Read More

최대 생산성

특허 받은 엔드 페이스 디자인 — 코너 안정성을 증가시키는 나선형 절삭 인선으로 최고 램핑각에서도 부드러운 절삭 동작 지원

특허 받은 코어 디자인 — 공구 안정성 향상

혁신적인 엔드 페이스 디자인 — 비대칭 분할 플루트와 가변 헬릭스로 진동 댐핑 및 탁월한 이송 지원

특허 받은 릴리프 — AVF 기술 사용. 면으로 이루어진 정밀 편심 릴리프로 진동 및 마찰 감소. 여러 소재에서 탁월한 절삭 조건 지원

특허 받은 플루트 디자인 — 혁신적인 플루트 내 칩 배출홈으로 절삭력을 낮춰 효율적인 칩 배출 지원

  

최대 혜택

HARVI™ I TE — 특허 받은 혁신적인 디자인으로 생산성 극대화

뛰어난 범용성. 강철, 스테인리스강, 주철, 내열합금을 탁월한 이송 속도와 압도적인 소재 제거율로 가공합니다.

다이내믹 밀링 및 극한의 램핑 작업을 포함한 다양한 가공에 적합

하나의 공구로 고성능 황삭 및 정삭이 가능한 4-플루트 엔드 밀

HARVI™ I TE — 최고의 소재 제거율, 최대 생산성, 최대 혜택 제공

   

필터 선택
필터
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (692)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(692)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(692)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(692)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(692)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(692)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(692)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(692)
    • M Stainless Steel (692)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(692)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(692)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(692)
    • K Cast Iron (692)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(692)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(692)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(692)
    • S High-Temp Alloys (692)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(692)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(692)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(692)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(692)
    • H Hardened Materials (692)
      • H1
        Hardened Materials 44-48 HRC(692)
      • H2
        Hardened Materials 48-55 HRC(692)
    1차 선택 선택
    • CN (216)
    • DE (166)
    • GB (38)
    • SG (49)
    • US (361)
    Applications
    Applications
    • DrillingDrilling (220)
    • Face MillingFace Milling (377)
    • PocketPocket (652)
    • Pocket HelicalPocket Helical (652)
    • Pocket MillingPocket Milling (645)
    • Pocket Plunge MillingPocket Plunge Milling (652)
    • Profile MillingProfile Milling (50)
    • RampingRamping (652)
    • Shoulder Ball NoseShoulder Ball Nose (50)
    • Shoulder MillingShoulder Milling (695)
    • Shoulder RoughingShoulder Roughing (652)
    • Shoulder Square EndShoulder Square End (652)
    • Slot Ball NoseSlot Ball Nose (50)
    • Slot MillingSlot Milling (695)
    • Slot Square EndSlot Square End (652)
    • Trochoidal MillingTrochoidal Milling (702)
    Cutting Diameter
    Cutting Diameter
    • 0.063 in(2)
    • 0.078 in(1)
    • 0.079 in(12)
    • 0.094 in(2)
    • 0.098 in(10)
    • 0.109 in(1)
    • 0.119 in(12)
    • 0.125 in(10)
    • 0.138 in(10)
    • 0.156 in(3)
    • 0.157 in(20)
    • 0.188 in(10)
    • 0.197 in(12)
    • 0.219 in(3)
    • 0.237 in(20)
    • 0.25 in(22)
    • 0.281 in(3)
    • 0.313 in(12)
    • 0.315 in(20)
    • 0.375 in(44)
    • 0.394 in(34)
    • 0.438 in(10)
    • 0.473 in(40)
    • 0.5 in(66)
    • 0.551 in(10)
    • 0.625 in(48)
    • 0.63 in(45)
    • 0.709 in(8)
    • 0.75 in(58)
    • 0.787 in(45)
    • 0.984 in(43)
    • 1.0 in(56)
    • 1.25 in(10)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 1.6 mm(2)
    • 1.975 mm(1)
    • 2.0 mm(12)
    • 2.375 mm(2)
    • 2.5 mm(10)
    • 2.776 mm(1)
    • 3.0 mm(12)
    • 3.176 mm(10)
    • 3.5 mm(10)
    • 3.975 mm(3)
    • 4.0 mm(20)
    • 4.775 mm(10)
    • 5.0 mm(12)
    • 5.551 mm(3)
    • 6.0 mm(20)
    • 6.351 mm(22)
    • 7.15 mm(3)
    • 7.95 mm(12)
    • 8.0 mm(20)
    • 9.525 mm(44)
    • 10.0 mm(34)
    • 11.125 mm(10)
    • 12.0 mm(40)
    • 12.701 mm(66)
    • 14.0 mm(10)
    • 15.875 mm(48)
    • 16.0 mm(45)
    • 18.0 mm(8)
    • 19.05 mm(58)
    • 20.0 mm(45)
    • 25.0 mm(43)
    • 25.401 mm(56)
    • 31.75 mm(10)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 7.95 mm(1)
    Maximum Cutting Diameter Min받는 사람Maximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 0.313 in(1)
    Maximum Cutting Diameter Min받는 사람Maximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 2.0 mm(1)
    • 3.0 mm(1)
    • 3.176 mm(2)
    • 3.975 mm(1)
    • 4.0 mm(5)
    • 4.775 mm(2)
    • 5.0 mm(8)
    • 6.0 mm(19)
    • 6.351 mm(6)
    • 7.0 mm(6)
    • 7.95 mm(2)
    • 8.0 mm(12)
    • 9.0 mm(8)
    • 9.525 mm(11)
    • 10.0 mm(10)
    • 11.0 mm(8)
    • 11.125 mm(6)
    • 12.0 mm(11)
    • 12.701 mm(27)
    • 13.0 mm(17)
    • 14.0 mm(4)
    • 15.0 mm(11)
    • 15.875 mm(27)
    • 16.0 mm(11)
    • 18.0 mm(14)
    • 19.0 mm(4)
    • 19.05 mm(29)
    • 20.0 mm(2)
    • 20.625 mm(3)
    • 22.0 mm(22)
    • 22.225 mm(22)
    • 24.0 mm(16)
    • 25.0 mm(1)
    • 25.401 mm(52)
    • 26.0 mm(34)
    • 28.576 mm(8)
    • 30.0 mm(17)
    • 31.75 mm(32)
    • 32.0 mm(29)
    • 35.0 mm(2)
    • 37.5 mm(12)
    • 38.0 mm(27)
    • 38.1 mm(49)
    • 40.0 mm(1)
    • 44.45 mm(2)
    • 45.0 mm(27)
    • 50.0 mm(1)
    • 50.801 mm(6)
    • 57.151 mm(40)
    • 66.675 mm(2)
    • 76.2 mm(22)
    • 82.551 mm(2)
    • 101.601 mm(8)
    Cutting Length Min받는 사람Cutting Length Max
    Cutting Length
    Cutting Length
    • 0.079 in(1)
    • 0.119 in(1)
    • 0.125 in(2)
    • 0.156 in(1)
    • 0.157 in(5)
    • 0.188 in(2)
    • 0.197 in(8)
    • 0.237 in(19)
    • 0.25 in(6)
    • 0.276 in(6)
    • 0.313 in(2)
    • 0.315 in(12)
    • 0.354 in(8)
    • 0.375 in(11)
    • 0.394 in(10)
    • 0.433 in(8)
    • 0.438 in(6)
    • 0.473 in(11)
    • 0.5 in(27)
    • 0.512 in(17)
    • 0.551 in(4)
    • 0.591 in(11)
    • 0.625 in(27)
    • 0.63 in(11)
    • 0.709 in(14)
    • 0.748 in(4)
    • 0.75 in(29)
    • 0.787 in(2)
    • 0.812 in(3)
    • 0.866 in(22)
    • 0.875 in(22)
    • 0.946 in(16)
    • 0.984 in(1)
    • 1.0 in(52)
    • 1.024 in(34)
    • 1.125 in(8)
    • 1.181 in(17)
    • 1.25 in(32)
    • 1.26 in(29)
    • 1.379 in(2)
    • 1.476 in(12)
    • 1.496 in(27)
    • 1.5 in(49)
    • 1.575 in(1)
    • 1.75 in(2)
    • 1.772 in(27)
    • 1.969 in(1)
    • 2.0 in(6)
    • 2.25 in(40)
    • 2.625 in(2)
    • 3.0 in(22)
    • 3.25 in(2)
    • 4.0 in(8)
    Cutting Length Min받는 사람Cutting Length Max
    Reach
    Reach
    • 0.184 in(2)
    • 0.228 in(1)
    • 0.237 in(1)
    • 0.25 in(1)
    • 0.267 in(2)
    • 0.275 in(1)
    • 0.31 in(1)
    • 0.313 in(2)
    • 0.315 in(1)
    • 0.352 in(4)
    • 0.375 in(5)
    • 0.394 in(1)
    • 0.438 in(3)
    • 0.44 in(1)
    • 0.473 in(7)
    • 0.5 in(13)
    • 0.512 in(4)
    • 0.564 in(1)
    • 0.591 in(4)
    • 0.605 in(3)
    • 0.625 in(16)
    • 0.63 in(12)
    • 0.65 in(3)
    • 0.704 in(1)
    • 0.709 in(10)
    • 0.716 in(2)
    • 0.75 in(14)
    • 0.774 in(1)
    • 0.787 in(1)
    • 0.812 in(1)
    • 0.814 in(1)
    • 0.845 in(1)
    • 0.866 in(3)
    • 0.875 in(9)
    • 0.946 in(6)
    • 0.956 in(3)
    • 0.988 in(3)
    • 1.0 in(10)
    • 1.024 in(4)
    • 1.051 in(2)
    • 1.063 in(7)
    • 1.115 in(12)
    • 1.158 in(1)
    • 1.181 in(9)
    • 1.193 in(5)
    • 1.25 in(14)
    • 1.26 in(9)
    • 1.283 in(4)
    • 1.328 in(15)
    • 1.407 in(5)
    • 1.417 in(10)
    • 1.431 in(5)
    • 1.496 in(3)
    • 1.5 in(30)
    • 1.575 in(5)
    • 1.578 in(4)
    • 1.655 in(4)
    • 1.665 in(15)
    • 1.772 in(2)
    • 1.891 in(6)
    • 1.909 in(10)
    • 2.0 in(14)
    • 2.012 in(15)
    • 2.087 in(18)
    • 2.126 in(2)
    • 2.25 in(56)
    • 2.277 in(1)
    • 2.283 in(12)
    • 2.362 in(6)
    • 2.386 in(10)
    • 2.441 in(1)
    • 2.874 in(42)
    • 2.924 in(5)
    • 2.934 in(5)
    • 2.953 in(37)
    • 3.0 in(22)
    • 3.25 in(16)
    • 3.938 in(1)
    • 4.0 in(8)
    Reach Min받는 사람Reach Max
    Reach
    Reach
    • 4.675 mm(2)
    • 5.801 mm(1)
    • 6.0 mm(1)
    • 6.351 mm(1)
    • 6.775 mm(2)
    • 6.976 mm(1)
    • 7.875 mm(1)
    • 7.95 mm(2)
    • 8.0 mm(1)
    • 8.925 mm(4)
    • 9.525 mm(5)
    • 10.0 mm(1)
    • 11.125 mm(3)
    • 11.175 mm(1)
    • 12.0 mm(7)
    • 12.701 mm(13)
    • 13.0 mm(4)
    • 14.3 mm(1)
    • 15.0 mm(4)
    • 15.375 mm(3)
    • 15.875 mm(16)
    • 16.0 mm(12)
    • 16.5 mm(3)
    • 17.875 mm(1)
    • 18.0 mm(10)
    • 18.175 mm(2)
    • 19.05 mm(14)
    • 19.651 mm(1)
    • 20.0 mm(1)
    • 20.625 mm(1)
    • 20.651 mm(1)
    • 21.475 mm(1)
    • 22.0 mm(3)
    • 22.225 mm(9)
    • 24.0 mm(6)
    • 24.25 mm(3)
    • 25.1 mm(3)
    • 25.401 mm(10)
    • 26.0 mm(4)
    • 26.701 mm(2)
    • 27.0 mm(7)
    • 28.326 mm(12)
    • 29.425 mm(1)
    • 30.0 mm(9)
    • 30.3 mm(5)
    • 31.75 mm(14)
    • 32.0 mm(9)
    • 32.6 mm(4)
    • 33.725 mm(15)
    • 35.7 mm(5)
    • 36.0 mm(10)
    • 36.35 mm(5)
    • 38.0 mm(3)
    • 38.1 mm(30)
    • 40.0 mm(5)
    • 40.075 mm(4)
    • 42.0 mm(4)
    • 42.276 mm(15)
    • 45.0 mm(2)
    • 48.0 mm(6)
    • 48.475 mm(10)
    • 50.801 mm(14)
    • 51.1 mm(15)
    • 53.0 mm(18)
    • 54.0 mm(2)
    • 57.151 mm(56)
    • 57.801 mm(1)
    • 58.0 mm(12)
    • 60.0 mm(6)
    • 60.6 mm(10)
    • 62.0 mm(1)
    • 73.0 mm(42)
    • 74.275 mm(5)
    • 74.5 mm(5)
    • 75.0 mm(37)
    • 76.2 mm(22)
    • 82.551 mm(16)
    • 100.0 mm(1)
    • 101.601 mm(8)
    Reach Min받는 사람Reach Max
    Connection Style
    Connection Style
    • SAFE-LOCK (27)
    • Straight-Cylindrical (384)
    • Weldon (291)
    Over All Length [L]
    Over All Length [L]
    • 1.5 in(15)
    • 1.969 in(10)
    • 2.0 in(24)
    • 2.126 in(32)
    • 2.165 in(4)
    • 2.244 in(40)
    • 2.25 in(5)
    • 2.283 in(4)
    • 2.48 in(12)
    • 2.5 in(46)
    • 2.598 in(4)
    • 2.677 in(4)
    • 2.75 in(8)
    • 2.757 in(4)
    • 2.835 in(6)
    • 2.874 in(4)
    • 2.953 in(4)
    • 2.992 in(16)
    • 3.0 in(38)
    • 3.228 in(4)
    • 3.25 in(14)
    • 3.269 in(23)
    • 3.5 in(24)
    • 3.622 in(18)
    • 3.938 in(43)
    • 4.0 in(73)
    • 4.094 in(6)
    • 4.331 in(1)
    • 4.5 in(24)
    • 4.529 in(12)
    • 4.764 in(11)
    • 4.921 in(43)
    • 5.0 in(40)
    • 5.315 in(33)
    • 5.5 in(16)
    • 5.906 in(2)
    • 6.0 in(16)
    • 6.535 in(1)
    • 7.0 in(18)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 38.1 mm(15)
    • 50.0 mm(10)
    • 50.801 mm(24)
    • 54.0 mm(32)
    • 55.0 mm(4)
    • 57.0 mm(40)
    • 57.151 mm(5)
    • 58.0 mm(4)
    • 63.0 mm(12)
    • 63.5 mm(46)
    • 66.0 mm(4)
    • 68.0 mm(4)
    • 69.851 mm(8)
    • 70.0 mm(4)
    • 72.0 mm(6)
    • 73.0 mm(4)
    • 75.0 mm(4)
    • 76.0 mm(16)
    • 76.2 mm(38)
    • 82.0 mm(4)
    • 82.551 mm(14)
    • 83.0 mm(23)
    • 88.9 mm(24)
    • 92.0 mm(18)
    • 100.0 mm(43)
    • 101.601 mm(73)
    • 104.0 mm(6)
    • 110.0 mm(1)
    • 114.301 mm(24)
    • 115.0 mm(12)
    • 121.0 mm(11)
    • 125.0 mm(43)
    • 127.0 mm(40)
    • 135.0 mm(33)
    • 139.701 mm(16)
    • 150.0 mm(2)
    • 152.4 mm(16)
    • 166.0 mm(1)
    • 177.8 mm(18)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    cornerConfiguration
    Corner Style
    Corner Style
    • BALL NOSE (50)
    • CHAMFER (137)
    • RADIUS (394)
    • SQUARE END (121)
    Corner Radius
    Corner Radius
    • 0.0 in(258)
    • 0.01 in(11)
    • 0.015 in(32)
    • 0.02 in(36)
    • 0.03 in(60)
    • 0.031 in(1)
    • 0.039 in(34)
    • 0.047 in(1)
    • 0.06 in(57)
    • 0.063 in(2)
    • 0.079 in(26)
    • 0.09 in(33)
    • 0.094 in(2)
    • 0.098 in(16)
    • 0.119 in(26)
    • 0.12 in(28)
    • 0.125 in(2)
    • 0.156 in(2)
    • 0.157 in(26)
    • 0.188 in(2)
    • 0.197 in(2)
    • 0.219 in(2)
    • 0.237 in(17)
    • 0.25 in(10)
    • 0.313 in(4)
    • 0.315 in(2)
    • 0.375 in(4)
    • 0.394 in(2)
    • 0.5 in(4)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(258)
    • 0.25 mm(11)
    • 0.375 mm(32)
    • 0.5 mm(36)
    • 0.75 mm(60)
    • 0.8 mm(1)
    • 1.0 mm(34)
    • 1.201 mm(1)
    • 1.5 mm(2)
    • 1.526 mm(55)
    • 1.6 mm(2)
    • 2.0 mm(26)
    • 2.275 mm(33)
    • 2.375 mm(2)
    • 2.5 mm(16)
    • 3.0 mm(26)
    • 3.051 mm(28)
    • 3.176 mm(2)
    • 3.975 mm(2)
    • 4.0 mm(26)
    • 4.775 mm(2)
    • 5.0 mm(2)
    • 5.551 mm(2)
    • 6.0 mm(17)
    • 6.351 mm(10)
    • 7.95 mm(4)
    • 8.0 mm(2)
    • 9.525 mm(4)
    • 10.0 mm(2)
    • 12.701 mm(4)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(565)
    • 0.1 mm(16)
    • 0.151 mm(12)
    • 0.2 mm(12)
    • 0.25 mm(8)
    • 0.301 mm(4)
    • 0.351 mm(14)
    • 0.375 mm(11)
    • 0.4 mm(8)
    • 0.5 mm(52)
    Corner Chamfer Min받는 사람Corner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(565)
    • 0.004 in(16)
    • 0.006 in(12)
    • 0.008 in(12)
    • 0.01 in(8)
    • 0.012 in(4)
    • 0.014 in(14)
    • 0.015 in(11)
    • 0.016 in(8)
    • 0.02 in(52)
    Corner Chamfer Min받는 사람Corner Chamfer Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KCPM15 (308)
    • KCSM15 (394)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 10.0 (228)
    • 45.0 (318)
    Maximum Ramp Angle Min받는 사람Maximum Ramp Angle Max
    frontEnd
    Neck Diameter
    Neck Diameter
    • 0.111 in(5)
    • 0.13 in(4)
    • 0.148 in(13)
    • 0.185 in(5)
    • 0.222 in(13)
    • 0.236 in(4)
    • 0.296 in(13)
    • 0.352 in(8)
    • 0.37 in(27)
    • 0.444 in(33)
    • 0.472 in(10)
    • 0.518 in(4)
    • 0.588 in(10)
    • 0.593 in(38)
    • 0.666 in(2)
    • 0.705 in(16)
    • 0.74 in(38)
    • 0.941 in(8)
    • 0.946 in(37)
    Neck Diameter Min받는 사람Neck Diameter Max
    Neck Diameter
    Neck Diameter
    • 2.825 mm(5)
    • 3.301 mm(4)
    • 3.75 mm(13)
    • 4.7 mm(5)
    • 5.65 mm(13)
    • 5.976 mm(4)
    • 7.525 mm(13)
    • 8.951 mm(8)
    • 9.4 mm(27)
    • 11.275 mm(33)
    • 11.951 mm(10)
    • 13.15 mm(4)
    • 14.925 mm(10)
    • 15.05 mm(38)
    • 16.925 mm(2)
    • 17.901 mm(16)
    • 18.8 mm(38)
    • 23.875 mm(8)
    • 24.0 mm(37)
    Neck Diameter Min받는 사람Neck Diameter Max
    backEnd
    Back-End Diameter
    Back-End Diameter
    • 3.176 mm(16)
    • 4.0 mm(6)
    • 4.775 mm(13)
    • 6.0 mm(90)
    • 6.351 mm(25)
    • 7.95 mm(15)
    • 8.0 mm(20)
    • 9.525 mm(44)
    • 10.0 mm(34)
    • 11.125 mm(10)
    • 12.0 mm(40)
    • 12.701 mm(66)
    • 14.0 mm(10)
    • 15.875 mm(48)
    • 16.0 mm(45)
    • 18.0 mm(8)
    • 19.05 mm(58)
    • 20.0 mm(45)
    • 25.0 mm(43)
    • 25.401 mm(56)
    • 31.75 mm(10)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.125 in(16)
    • 0.157 in(6)
    • 0.188 in(13)
    • 0.237 in(90)
    • 0.25 in(25)
    • 0.313 in(15)
    • 0.315 in(20)
    • 0.375 in(44)
    • 0.394 in(34)
    • 0.438 in(10)
    • 0.473 in(40)
    • 0.5 in(66)
    • 0.551 in(10)
    • 0.625 in(48)
    • 0.63 in(45)
    • 0.709 in(8)
    • 0.75 in(58)
    • 0.787 in(45)
    • 0.984 in(43)
    • 1.0 in(56)
    • 1.25 in(10)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    No filters matching ""

    HARVI™ I TE • Radiused • 4 Flutes • Necked • Weldon® Shank • Inch

    (26)HARVI™ I TE • Radiused • 4 Flutes • Necked • Weldon® Shank • Inch

    HARVI™ I TE • 챔퍼형 • 4 플루트 • 단형 • Weldon® 섕크 • Metric

    (15)HARVI™ I TE • 챔퍼형 • 4 플루트 • 단형 • Weldon® 섕크 • Metric

    HARVI™ I TE • 스퀘어 엔드 • 4 플루트 • 단형 • Weldon® 섕크 • Metric

    (15)HARVI™ I TE • 스퀘어 엔드 • 4 플루트 • 단형 • Weldon® 섕크 • Metric

    HARVI™ I TE • Square End • 4 Flutes • Plain Shank • Inch

    (39)HARVI™ I TE • Square End • 4 Flutes • Plain Shank • Inch

    HARVI™ I TE • Radiused • 4 Flutes • Necked •