Country

언어

측정 단위

정가:

할인: %

정가:

$1,104.79 /각각

가격::

수량

SDS

KCRA - RN • Face Mills • Inch

Name: KCRA - RN • Face Mills • Inch
SKU: 5704051
Rating: 0 (0 reviews)

Face Mills

Metric

Inch

SAP Material Number	5704051
ISO Catalog Number	KCRA300RN4311S100L200
ANSI Catalog Number	KCRA300RN4311S100L200
[D1MAX] Maximum Cutting Diameter	76.2 mm
[D1MAX] Maximum Cutting Diameter	3 in
[D1] Effective Cutting Diameter	63.5 mm
[D1] Effective Cutting Diameter	2.5 in
[D] Adapter / Shank / Bore Diameter	25.4 mm
[D] Adapter / Shank / Bore Diameter	1 in
[D6] Hub Diameter	69.85 mm
[D6] Hub Diameter	2.75 in
[L] Overall Length	50.8 mm
[L] Overall Length	2 in
[AP1MAX] 1st Maximum Cutting Depth	6.35 mm
[AP1MAX] 1st Maximum Cutting Depth	.25 in
Number of Inserts	11
Max RPM	18100
Weight Pounds	2.82
Gage Insert	RNGN120400

모든 제품 변형 보기

사용 및 응용 분야

Milling - Pressurized Air Coolant
페이스 밀링
사이드 밀링/숄더 밀링: 볼 노즈
밀링 — 사이드 및 페이스

공작물 재료

P Steel

S High-Temp Alloys

특징 및 장점

First choice for face and shoulder milling high-temperature alloys.

Higher material removal rate due to fine pitch cutters.

Secure clamping system, improving process stability and reliability.

Effective air coolant feature. Better chip flow and increased insert tool life.

기계 측면

로드 중...

공작물 측면

로드 중...

Material Group	Light Machining		General Purpose		Heavy Machining
–	(Light geometry)		–		(Strong geometry)
–	wear resistance		<="" td="">		toughness
–	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	–	–	–	–	–	–
P3–P4	–	–	–	–	–	–
P5–P6	–	–	–	–	–	–
M1–M2	–	–	–	–	–	–
M3	–	–	–	–	–	–
K1–K2	–	–	–	–	–	–
K3	–	–	–	–	–	–
N1–N2	–	–	–	–	–	–
N3	–	–	–	–	–	–
S1–S2	.EGN	KYS30	.EGN	KYS30	.TGN	KYS30
S3	.EGN	KYSP30	.EGN	KYSP30	.TGN	KYSP30
S4	–	–	–	–	–	–
H1	–	–	–	–	–	–

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	10%			20%			30%			40%			50–100%
.EGN	.003	.004	.005	.003	.003	.003	.002	.002	.003	.002	.002	.003	.002	.002	.003	.EGN
.TGN	.005	.007	.008	.004	.005	.006	.003	.004	.005	.003	.004	.005	.003	.004	.005	.TGN

Light Machining

General Purpose

Heavy Machining

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	10%			20%			30%			40%			50–100%
.EGN	.004	.004	.005	.003	.003	.004	.003	.003	.003	.002	.003	.003	.002	.003	.003	.EGN
.TGN	.006	.008	.009	.004	.006	.007	.004	.005	.006	.004	.005	.005	.003	.005	.005	.TGN

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	10%			20%			30%			40%			50–100%
.EGN	.007	.008	.009	.005	.006	.007	.005	.005	.006	.004	.005	.006	.004	.005	.006	.EGN
.TGN	.010	.014	.016	.008	.010	.012	.007	.009	.010	.006	.008	.010	.006	.008	.010	.TGN

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	10%			20%			30%			40%			50–100%
.EGN	.005	.006	.007	.004	.004	.005	.003	.004	.004	.003	.003	.004	.003	.003	.004	.EGN
.TGN	.008	.010	.012	.006	.008	.009	.005	.007	.008	.005	.006	.007	.005	.006	.007	.TGN

인서트 어셈블리 가이드

Safety Notes
<="" td="">	<="" td="">	<="" td="">	<="" td="">	<="" td="">	<="" td="" />
Read all instructions carefully	Wear eye protection	Inspect and tighten fasteners regularly	Warning: Cutting hazard	Warning: Hot surfaces	Do not exceed maximum RPM

Assembly Instructions
Assemble STCM-25 screw to KW1008 wedge, 1 to 1 1/2 turns.	Wedge/screw assembly.
<="" td="">	<="" td="" />
Install wedge/screw assembly into cutter body, but maintain assembly gap for installing insert.	Slide insert, RNGN12... into pocket and torque wedge/insert assembly to 3,5 Nm (31 in/lbs). Repeat for each pocket.
<="" td="">	<="" td="" />

Recommended Starting Speeds [SFM]

Material Group		KYS30			KYSP30
P	1	–	–	–	–	–	–
	2	–	–	–	–	–	–
	3	–	–	–	–	–	–
	4	–	–	–	–	–	–
	5	–	–	–	–	–	–
	6	–	–	–	–	–	–
M	1	–	–	–	–	–	–
	2	–	–	–	–	–	–
	3	–	–	–	–	–	–
K	1	–	–	–	–	–	–
	2	–	–	–	–	–	–
	3	–	–	–	–	–	–
N	1	–	–	–	–	–	–
	2	–	–	–	–	–	–
S	1	2640	2160	1680	2640	2160	1680
	2	2640	2160	1680	2640	2160	1680
	3	3840	3120	2400	3840	3120	2400
	4	–	–	–	–	–	–
H	1	–	–	–	–	–	–
	2	–	–	–	–	–	–
	3	–	–	–	–	–	–

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	ISO 카탈로그 번호	등급

환영합니다

기본 설정을 확인해 주십시오

기본 설정 업데이트

제품 제안

Product Family suggestions

영업팀에 문의

영업팀에 문의

솔루션 수정

솔루션 추가