successfully added to cart
View Cart

Notifications

Mark all as read
Kenloc™ Inserts
Kenloc™ Inserts
Kenloc™ Inserts
Kenloc™ Inserts

CNGA-FW/MW MT

Kenloc™ Inserts

Workpiece Materials

K Cast Iron
H Hardened Materials
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • H Hardened Materials (13)
    • H1
      Hardened Materials 44-48 HRC
      (13)
    • H2
      Hardened Materials 48-55 HRC
      (13)
    • H3
      Hardened Materials 56-60 HRC
      (13)
    • H4
      Hardened Materials >60 HRC
      (13)
Select First Choice
  • CN (2)
  • DE (2)
  • IN (4)
  • US (2)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (2)
  • Lightly Interrupted Cut (3)
  • Smooth Cut (9)
  • Varying Depth of Cut (3)
Corner configuration
Corner Radius
Corner Radius
  • 0.0156 in (4)
  • 0.0312 in (5)
  • 0.0313 in (1)
  • 0.0469 in (3)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.397 mm (2)
  • 0.4 mm (2)
  • 0.794 mm (5)
  • 0.8 mm (1)
  • 1.191 mm (2)
  • 1.2 mm (1)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (2)
  • Lightly Interrupted Cut (3)
  • Smooth Cut (9)
  • Varying Depth of Cut (3)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KB5610 (2)
  • KB5630 (2)
  • KBH10 (4)
  • KBH20 (5)
Insert Geometry
Cutting Edge Length
Cutting Edge Length
  • 12.896 mm (2)
  • 12.9 mm (11)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.5077 in (2)
  • 0.508 in (11)
Cutting Edge Length Min to Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • MT (1)
Cutting Tool Material
Cutting Tool Material
  • B H (2)
  • B L (9)
  • H W (2)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 10 of 13 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius
5330698 CNGA120404S01015FWMT CNGA431S0415FWMT KBH20 12.7000 .5000 12.9000 .5080 4.7820 .1883 0.3970 .0156  
    List price:
    $100.00 /each.
    Your price::
    Qty
    6295899 CNGA120404S01015FWMT CNGA431S0415FWMT KBH10 12.7000 .5000 12.9000 .5080 4.7820 .1883 0.3970 .0156  
      List price:
      $100.00 /each.
      Your price::
      Qty
      3747223 CNGA120404S01025FWMT CNGA431S0425FWMT KB5630   12.7000 .5000 12.9000 .5080 4.7820 .1883 0.4000 .0156
        List price:
        $122.22 /each.
        Your price::
        Qty
        3647246 CNGA120404S01025FWMT CNGA431S0425FWMT KB5610 12.7000 .5000 12.9000 .5080 4.7820 .1883 0.4000 .0156  
          List price:
          $125.12 /each.
          Your price::
          Qty
          6904784 CNGA120408EFWMT CNGA432EFWMT KBH20 12.7000 .5000 12.8960 .5077 4.7620 .1875 0.8000 .0312  
            List price:
            $97.32 /each.
            Your price::
            Qty
            5330832 CNGA120408S01015FWMT CNGA432S0415FWMT KBH20 12.7000 .5000 12.9000 .5080 4.7820 .1883 0.7940 .0312  
              List price:
              $100.00 /each.
              Your price::
              Qty
              6295921 CNGA120408S01015FWMT CNGA432S0415FWMT KBH10 12.7000 .5000 12.9000 .5080 4.7820 .1883 0.7940 .0312  
                List price:
                $100.00 /each.
                Your price::
                Qty
                3747224 CNGA120408S01025FWMT CNGA432S0425FWMT KB5630 12.7000 .5000 12.9000 .5080 4.7820 .1883 0.7940 .0312  
                  List price:
                  $107.22 /each.
                  Your price::
                  Qty
                  3647247 CNGA120408S01025FWMT CNGA432S0425FWMT KB5610 12.7000 .5000 12.9000 .5080 4.7820 .1883 0.7940 .0312  
                    List price:
                    $125.12 /each.
                    Your price::
                    Qty
                    6295925 CNGA120408S01225FWMT CNGA432S0525FWMT KBH10 12.7000 .5000 12.9000 .5080 4.7820 .1883 0.7940 .0312  
                      List price:
                      $100.00 /each.
                      Your price::
                      Qty
                      6904785 CNGA120412EFWMT CNGA433EFWMT KBH20 12.7000 .5000 12.8960 .5077 4.7620 .1875 1.2000 .0468  
                        List price:
                        $97.32 /each.
                        Your price::
                        Qty
                        5330836 CNGA120412S01015FWMT CNGA433S0415FWMT KBH20 12.7000 .5000 12.9000 .5080 4.7620 .1875 1.1910 .0469  
                          List price:
                          $100.00 /each.
                          Your price::
                          Qty
                          6295927 CNGA120412S01225FWMT CNGA433S0525FWMT KBH10 12.7000 .5000 12.9000 .5080 4.7820 .1883 1.1910 .0469  
                            List price:
                            $100.00 /each.
                            Your price::
                            Qty
                            List price:
                            Discount: %
                            Your price::
                            Replacement This item is not available
                            Replacement Product This item may be available through a distributor
                            Qty

                            Sold in pkg. of

                            Grades

                            • KB1345

                              Composition: A high CBN content, PcBN tip brazed onto a carbide insert.
                              Application: Applied in roughing to finishing of fully pearlitic gray cast iron, chilled irons, high-chrome alloyed steels, sintered powdered metals, and heavy cuts in hardened steels (>45 HRC). Also used for finishing chilled cast iron and fully pearlitic cast iron. The tipped PcBN insert is available in a wide range of insert styles including positive rake geometries that are ideally suited for boring applications.

                              K Cast Iron
                            • KB1610

                              Composition: A low CBN content, PCBN tip brazed onto a carbide insert.
                              Application: Designed for precision finishing in smooth cuts on hardened steels (>45 HRC) where optimal surface finish is needed. Use on bearing steel, hot and cold work tool steels, high-speed steels, die steels, case hardened steels, carburized and nitrided irons, and some hard coatings. Do not apply on soft steel.

                              H Hardened Materials
                            • KB1625

                              Composition: A medium CBN content, PCBN tip brazed onto a carbide insert.
                              Application: Designed for roughing to finishing of hardened steels (>45 HRC) where optimal surface finish is needed. It can be used in continuous to interrupted cutting of bearing steel, hot and cold work tool steels, high-speed steels, die steels, case-hardened steels, carburized and nitrided irons, and some hard coatings.

                              H Hardened Materials
                            • KB5610

                              Composition: A low content PCBN grade with a PVD TiAlN coating for added wear resistance.
                              Application: Designed for the precision machining of hardened steels (>45 HRC). The PVD coating offers improved wear resistance and excellent surface finish capabilities. It can be very effectively applied on bearing steels, hot and cold work tool steels, high-speed steels, die steels, case-hardened steels, carburised and nitrided irons, and some hard coatings. Available in a multitip format with a tremendous breadth of edge preps, insert styles, and wiper geometries.

                              H Hardened Materials
                            • KB5625

                              Composition: A PVD TiAlN coating over a medium content, PCBN tip brazed onto a carbide insert.
                              Application: Designed for roughing to finishing of hardened steels (>45 HRC). Use on bearing steel, hot and cold work tool steels, high-speed steels, die steels, case-hardened steels, carburised and nitrided irons, and some hard coatings.

                              H Hardened Materials
                            • KB5630

                              Composition: A high content PcBN with a PVD AlTiN coating for added wear resistance.
                              Application: Designed for roughing to finishing of hardened steels (>45 HRC), abrasive workpiece materials such as sintered valve seat materials, powder metallurgy steels, and hard high-alloy cast irons. The PVD coating provides resistance to crater wear and increased resistance to chipping. A wide range of styles are available, including Screw-On geometries that are ideal for boring applications.

                              H Hardened Materials
                            • KB9610

                              composition: A low content PCBN grade with a TiN/Al2O3/TiCN CVD
                              coating for protection against harmful crater wear.
                              application: The KB9610 grade is designed for the precision machining
                              of hardened steels (>48 HRC), the harder the steel the better. KB9610
                              is effectively applied on bearing steels, hot and cold work tool steels,
                              high-speed steels, die steels, case hardened steels, carburized and
                              nitrided irons, and some hard coatings. Do not use on soft steels.
                              For best results, apply negative rake tools in OD applications and
                              positive tools in ID applications. The KB9610 grade is available in
                              a multi-tip format with a tremendous breadth of edge preps and two
                              styles of wiper geometries.

                            • KBH10

                              Composition: A low content PcBN grade with a patented binder structure.
                              Application: Designed for the precision machining of hardened steels (>45 HRC). It can be effectively applied on bearing steels, hot and cold work tool steels, high speed steels, die steels, case hardened steels, carburized and nitrided irons, and some hard coatings. Available in a multi-tip format with a wide range of edge preps, insert styles, and wiper geometries.

                              H Hardened Materials
                            • KBH20

                              Composition: A low content PcBN grade with a PVD TiN/AlTiN coating for added wear resistance.
                              Application: KBH20™ is the ideal PcBN hard turning grade for continuous to lightly interrupted cutting applications. The structure, as well as the different edge preparations, enable repeatable workpiece tolerances, excellent surface finishes, and surface integrity. Typical applications are case-hardened steel components such as gears, shafts, and other drive-train components.

                              H Hardened Materials
                            product-image
                            Please adjust the following properties from

                            ISO Catalog Number

                            ANSI Catalog Number

                            to find similar products.
                            You are about to create a duplicate . Do you want to proceed?
                            You are about to delete Do you want to proceed?
                            What would you like to rename your to?
                            Please enter a valid name
                            Please enter a name for the duplicate
                            Please enter a valid name
                            You are about to add to your My Solutions page. Do you want to proceed?
                            Please enter a valid name
                            Send a copy of

                            Please enter a valid Email
                            Please enter a valid name

                            The following CAD files are available

                            Please select a file to download

                            You should be logged to see your dashboard information
                            Session expired due to inactivity, please login again
                            The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                            item(s) successfully added to the cart
                            View Cart