
New customer
Are you new to Kennametal? Create an account and get started.
Create AccountRegistered User
already have an account? Sign in.
Sign InNew customer
Are you new to Kennametal? Create an account and get started.
Create AccountRegistered User
already have an account? Sign in.
Sign InView Cart
Notifications
Mark all as read-
P Steel (8)
-
P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(6)
-
P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(6)
-
P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(6)
-
P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(6)
-
P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(7)
-
P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(7)
-
P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(7)
-
-
M Stainless Steel (7)
-
M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(7)
-
M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(7)
-
M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(7)
-
-
K Cast Iron (6)
-
K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(6)
-
K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(6)
-
K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(6)
-
-
N Non-Ferrous Materials (1)
-
N1Wrought Aluminum(1)
-
N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1)
-
N3High-Silicon Aluminum Alloys Si >12.2%(1)
-
-
S High-Temp Alloys (6)
-
S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(5)
-
S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(5)
-
S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(5)
-
S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(6)
-
-
H Hardened Materials (3)
-
H1Hardened Materials 44-48 HRC(3)
-
-
BR (1)
-
CN (6)
-
DE (6)
-
GB (3)
-
IN (4)
-
SG (5)
-
US (6)
-
ID Thread Turning (1)
-
0.039 in (9)
-
0.126 in (1)
-
1.0 mm (9)
-
3.2 mm (1)
-
KC510M (1)
-
KC520M (1)
-
KC522M (1)
-
KC725M (2)
-
KCK15 (1)
-
KCPK30 (1)
-
KCPM20 (1)
-
KCPM40 (1)
-
KCSM40 (1)
-
6.426 mm (1)
-
6.45 mm (9)
SAP Material Number | ISO Catalog Number | ANSI Catalog Number | Grade | First Choice | [D] Insert IC Size | [D] Insert IC Size | [BS] Corner Facet Length | [BS] Corner Facet Length | [L10] Insert Cutting Edge Length | [L10] Insert Cutting Edge Length | [Rε] Corner Radius | [Rε] Corner Radius | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
4119640 | HNGJ060432ANENLD | HNGJ438ANENLD | KC725M | 12.0000 | .4724 | 6.4330 | .2533 | 3.2000 | .1260 | 4.4840 | .1765 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
$27.92
/each.
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
4119190 | HNGJ0604ANENLD | HNGJ43ANENLD | KCPK30 | 12.0000 | .4724 | 1.5150 | .0596 | 6.4430 | .2537 | 1.0000 | .0394 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
$28.40
/each.
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
4119224 | HNGJ0604ANENLD | HNGJ43ANENLD | KC725M | 12.0000 | .4724 | 1.5150 | .0596 | 6.4430 | .2537 | 1.0000 | .0394 | 4.4790 | .1763 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
$26.75
/each.
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
4119227 | HNGJ0604ANENLD | HNGJ43ANENLD | KCK15 | 12.0000 | .4724 | 1.5150 | .0596 | 6.4430 | .2537 | 1.0000 | .0394 | 4.4790 | .1763 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
$28.40
/each.
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
4121576 | HNGJ0604ANENLD | HNGJ43ANENLD | KC510M | 12.0000 | .4724 | 1.5150 | .0596 | 6.4430 | .2537 | 1.0000 | .0394 | 4.4790 | .1763 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
$26.75
/each.
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
4121577 | HNGJ0604ANENLD | HNGJ43ANENLD | KC520M | 12.0000 | .4724 | 1.5150 | .0596 | 6.4430 | .2537 | 1.0000 | .0394 | 4.4790 | .1763 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
$26.75
/each.
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
4121578 | HNGJ0604ANENLD | HNGJ43ANENLD | KC522M | 12.0000 | .4724 | 1.5150 | .0596 | 6.4430 | .2537 | 1.0000 | .0394 | 4.4790 | .1763 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
$26.75
/each.
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5550701 | HNGJ0604ANENLD | HNGJ43ANENLD | KCPM40 | 12.0000 | .4724 | 1.5150 | .0596 | 6.4430 | .2537 | 1.0000 | .0394 | 4.4790 | .1763 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
$28.63
/each.
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6165862 | HNGJ0604ANENLD | HNGJ43ANENLD | KCSM40 | 12.0000 | .4724 | 1.5150 | .0596 | 6.4430 | .2537 | 1.0000 | .0394 | 4.4790 | .1763 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
$28.63
/each.
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
4121579 | HNGJ0604ANENLD | HNGJ43ANENLD | KCPM20 | 12.0000 | .4724 | 1.5150 | .0596 | 6.4430 | .2537 | 1.0000 | .0394 | 4.4790 | .1763 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
$28.40
/each.
Your price::
Qty
|
Replacement Product This item may be available through a distributor
Sold in pkg. of
Grades
-
KC510M
Coated carbide grade with a TiAiN coating (PVD). KC510M is a highly wear-resistant grade primarily for use in milling aluminum and high-temperature alloys in light applications. Can also be used for machining of steel and hardened steel.
P SteelH Hardened MaterialsK Cast IronN Non-Ferrous -
KC520M
Coated carbide grade with TiAlN coating (PVD). KC520M is a carbide grade developed specifically for general machining of ductile cast iron. This grade can be used with or without coolant.
K Cast Iron -
KC522M
Coated carbide grade with a AlTiN (PVD) coating. KC522M is engineered to provide better performance in general machining of high-temperature alloys and stainless steel. KC522M resists breakage and offers improved wear resistance and increased strength.
P SteelS High-Temp AlloysH Hardened MaterialsK Cast IronM Stainless Steel -
KC725M
Coated carbide grade with an advanced PVD TiAlN coating. KC725M is a high-performance grade for milling steel, stainless steel, and ductile cast iron. The good thermal shock resistance of the substrate makes this grade ideal for both wet and dry machining. Primarily for use in general and heavy machining.
P SteelS High-Temp AlloysM Stainless Steel -
KCK15
Coated carbide grade with CVD multilayer coating (TiN/MT TiCN/Al2O3) and advanced Beyond™ post-coat treatment. KCK15 is a wear-resistant grade with balanced toughness for general milling of cast irons at higher speeds. Best results in dry, but can also be used wet.
K Cast Iron -
KCK20B
Composition: A multilayered coating with thick MTCVD TiCN-Al2O3-TiOCN layers applied over a carbide substrate specifically engineered for cast irons.
Application: Delivers consistent performance in high-speed machining of grey and ductile irons. The substrate design permits the insert to stay in the cut for a long time at high speeds with minimum deformation. The thick CVD coating and post-coat treatment provide superior wear resistance ensuring long and consistent tool life. Can be applied both in straight and lightly interrupted cuts.K Cast Iron -
KCKP10P SteelH Hardened MaterialsK Cast IronN Non-Ferrous
-
KCPK30
Coated carbide grade with CVD multilayer (TiN/TiCN/Al2O3) and advanced Beyond™ post-coat treatment. Substrate is very tough. KCPK30 has a wide application area in general and roughing milling of steels and cast irons. Performs best dry, but can also be used wet.
P SteelS High-Temp AlloysK Cast IronM Stainless Steel -
KCPM20
Coated carbide grade with CVD multilayer (TiN/MT TiCN/Al2O3) and advanced Beyond™ post-coat treatment. Substrate is a well-balanced combination of wear resistance and toughness. It is primarily for light and general machining of steel and stainless steel roughing of cast irons.
P SteelH Hardened MaterialsK Cast IronM Stainless Steel -
KCPM40
Coated carbide grade with an advanced PVD TiAlN/AlCrN coating. Tough substrate with excellent capability at higher temperatures. KCPM40™ is the first choice for milling steel and stainless steel. Good thermal shock resistance makes this grade ideal for both wet and dry machining. Primarily for use in general and heavy machining.
P SteelS High-Temp AlloysM Stainless Steel -
KCSM40
Coated carbide grade with an advanced PVD TiAlN/TiN coating. Premium substrate with newly developed binder composition. KCSM40 is a high-performance grade for titanium, super alloys, and stainless steel. High thermal shock resistance of the substrate makes this grade ideal for wet machining. First choice for roughing and unsuitable cutting conditions.
P SteelS High-Temp AlloysM Stainless Steel
Insert Selection Guide
Material Group | LightMachining | GeneralPurpose | HeavyMachining | |||
(Light geometry) | (Strong geometry) | |||||
wear resistance | toughness | |||||
Geometry | Grade | Geometry | Grade | Geometry | Grade | |
P1P2 | .E..LD | KCPM40 | .S..GD | KCPM40 | .S..HD | KCPM40 |
P3P4 | .E..LD | KCPK30 | .S..GD | KCPK30 | .S..HD | KCPK30 |
P5P6 | .E..LD | KC725M | .S..GD | KC725M | .S..HD | KCPK30 |
M1M2 | .E..LD | KC522M | .S..GD | KCSM40 | .S..HD | KCSM40 |
M3 | .E..LD | KCSM40 | .S..GD | KCSM40 | .S..HD | KCPM40 |
K1K2 | .E..LD | KCK15 | .S..GD | KCK15 | .S..HD | KCK15 |
K3 | .E..LD | KC520M | .S..GD | KC520M | .S..HD | KC520M |
N1N2 | .F..LDJ | KC410M | .F..LDJ | KC410M | .E..LD | KC510M |
N3 | .F..LDJ | KC410M | .F..LDJ | KC410M | .E..LD | KC510M |
S1S2 | .E..LD | KC725M | .S..GD | KC725M | .S..HD | KC725M |
S3 | .E..LD | KCSM40 | .S..GD | KCSM40 | .S..HD | KCSM40 |
S4 | .E..LD | KCSM40 | .S..GD | KCSM40 | .S..HD | KCSM40 |
H1 | .E..LD | KC510M | .E..LD | KC510M | .E..LD | KC510M |
Recommended Starting Feeds [mm]
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40100% | ||||||||||||
.F..LDJ | 0,45 | 1,27 | 2,22 | 0,33 | 0,91 | 1,57 | 0,25 | 0,68 | 1,17 | 0,21 | 0,59 | 1,01 | 0,20 | 0,54 | 0,93 | .F..LDJ |
.E..LD | 0,51 | 1,65 | 2,81 | 0,37 | 1,17 | 1,97 | 0,27 | 0,87 | 1,46 | 0,24 | 0,76 | 1,27 | 0,22 | 0,70 | 1,16 | .E..LD |
.S..GD | 0,92 | 2,22 | 3,41 | 0,66 | 1,57 | 2,38 | 0,49 | 1,17 | 1,75 | 0,43 | 1,01 | 1,52 | 0,39 | 0,93 | 1,39 | .S..GD |
.S..HD | 0,92 | 2,35 | 3,89 | 0,66 | 1,67 | 2,70 | 0,49 | 1,23 | 1,98 | 0,43 | 1,07 | 1,72 | 0,39 | 0,98 | 1,57 | .S..HD |
LightMachining | GeneralPurpose | HeavyMachining |
Recommended Starting Speeds [m/min]
Material Group | K313 | KC410M | KC510M | KC520M | KC522M | KC725M | KCK15 | KCMP30 | KCPK30 | KCPM20 | KCPM40 | KCSM30 | KCSM40 | |||||||||||||||||||||||||||
P | 1 | – | – | – | – | – | – | – | – | – | – | – | – | 395 | 340 | 325 | 310 | 275 | 260 | – | – | – | 545 | 475 | 445 | 545 | 475 | 445 | 660 | 580 | 540 | 355 | 310 | 295 | 445 | 385 | 360 | – | – | – |
2 | – | – | – | – | – | – | – | – | – | – | – | – | 330 | 290 | 240 | 265 | 230 | 190 | – | – | – | 335 | 305 | 275 | 335 | 305 | 275 | 410 | 370 | 330 | 300 | 260 | 215 | 365 | 325 | 265 | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | 305 | 260 | 210 | 240 | 205 | 170 | – | – | – | 305 | 275 | 245 | 305 | 275 | 245 | 370 | 330 | 305 | 275 | 235 | 190 | 340 | 290 | 235 | – | – | – | |
4 | – | – | – | – | – | – | 295 | 240 | 205 | – | – | – | 270 | 220 | 180 | 215 | 180 | 145 | – | – | – | 230 | 210 | 190 | 230 | 210 | 190 | 275 | 260 | 230 | 245 | 205 | 160 | 300 | 245 | 200 | – | – | – | |
5 | – | – | – | – | – | – | – | – | – | – | – | – | 220 | 205 | 180 | 180 | 160 | 145 | – | – | – | 310 | 275 | 250 | 310 | 275 | 250 | 330 | 300 | 275 | 205 | 185 | 160 | 245 | 230 | 200 | 165 | 120 | 85 | |
6 | – | – | – | – | – | – | – | – | – | – | – | – | 200 | 150 | 120 | 155 | 120 | 95 | – | – | – | 190 | 160 | 0 | 190 | 160 | 0 | 230 | 205 | 175 | 180 | 140 | 110 | 220 | 170 | 130 | 140 | 100 | 60 | |
M | 1 | – | – | – | – | – | – | – | – | – | – | – | – | 245 | 215 | 200 | 205 | 180 | 160 | – | – | – | 245 | 220 | 185 | 245 | 220 | 185 | 270 | 240 | 210 | 235 | 205 | 185 | 270 | 240 | 220 | 315 | 225 | 140 |
2 | – | – | – | – | – | – | – | – | – | – | – | – | 220 | 190 | 155 | 185 | 155 | 130 | – | – | – | 220 | 190 | 170 | 220 | 190 | 170 | 245 | 210 | 190 | 210 | 180 | 150 | 245 | 215 | 175 | 280 | 205 | 130 | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | 170 | 145 | 115 | 140 | 120 | 95 | – | – | – | 175 | 155 | 140 | 175 | 155 | 140 | 190 | 175 | 150 | 155 | 140 | 110 | 185 | 160 | 125 | 230 | 165 | 105 | |
K | 1 | 230 | 205 | 180 | – | – | – | 355 | 320 | 290 | 325 | 295 | 260 | 275 | 245 | 220 | – | – | – | 505 | 460 | 410 | – | – | – | 355 | 320 | 290 | 430 | 390 | 355 | – | – | – | – | – | – | – | – | – |
2 | – | – | – | – | – | – | 275 | 245 | 230 | 250 | 230 | 210 | 215 | 190 | 180 | – | – | – | 400 | 355 | 330 | – | – | – | 280 | 250 | 230 | 340 | 305 | 280 | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | 235 | 210 | 190 | 210 | 190 | 175 | 180 | 160 | 145 | – | – | – | 335 | 300 | 275 | – | – | – | 235 | 210 | 190 | 290 | 260 | 240 | – | – | – | – | – | – | – | – | – | |
N | 1 | 955 | 835 | 720 | 1460 | 1295 | 1195 | 770 | 685 | 630 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
2 | – | – | – | 1295 | 1195 | 1100 | 695 | 640 | 590 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | 1295 | 1195 | 1100 | 695 | 640 | 590 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
S | 1 | – | – | – | – | – | – | – | – | – | – | – | – | 50 | 40 | 30 | 40 | 35 | 30 | – | – | – | 40 | 35 | 30 | – | – | – | – | – | – | 50 | 40 | 35 | 55 | 50 | 35 | 75 | 55 | 35 |
2 | – | – | – | – | – | – | – | – | – | – | – | – | 50 | 40 | 30 | 40 | 35 | 30 | – | – | – | 40 | 35 | 30 | – | – | – | – | – | – | 50 | 40 | 35 | 55 | 50 | 35 | 70 | 50 | 35 | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | 60 | 50 | 30 | 55 | 40 | 30 | – | – | – | 55 | 40 | 30 | – | – | – | – | – | – | 60 | 50 | 35 | 65 | 55 | 35 | 80 | 55 | 35 | |
4 | – | – | – | – | – | – | – | – | – | – | – | – | 85 | 60 | 40 | 70 | 55 | 35 | – | – | – | 70 | 55 | 35 | 80 | 60 | 40 | – | – | – | 80 | 60 | 40 | 100 | 70 | 50 | 110 | 80 | 50 | |
H | 1 | – | – | – | – | – | – | 190 | 155 | 110 | – | – | – | 145 | 110 | 85 | – | – | – | – | – | – | – | – | – | – | – | – | 170 | 140 | 115 | – | – | – | 160 | 120 | 90 | – | – | – |
2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |