successfully added to cart
View Cart

Notifications

Mark all as read
Mill 1-10™ Inserts
Mill 1-10™ Inserts
Mill 1-10™ Inserts
Mill 1-10™ Inserts

Inserts for Mill 1-10™ • EDCT-LD

Mill 1-10™ Inserts

Features and benefits

  • Finishing and high-precision applications.

  • Light machining.

  • 15° positive rake angle.

  • Perfect floor surface finish.

  • Ap1 max = .393″ (10mm).

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (2)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (2)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (2)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (2)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (2)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (2)
  • M Stainless Steel (2)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (2)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (2)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (2)
  • S High-Temp Alloys (2)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (2)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (2)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (2)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (2)
Select First Choice
  • CN (2)
  • DE (2)
  • GB (1)
  • IN (1)
  • US (2)
Corner configuration
Corner Radius
  • 0.79 (1)
  • 3.1 (1)
to
Corner Radius
  • 0.031 (1)
  • 0.122 (1)
to
Application
Grade Of Cutting Tool
  • KC725M (1)
  • KCPM40 (1)
Insert Geometry
Cutting Edge Length
  • 0.395 (1)
  • 0.408 (1)
to
Cutting Edge Length
  • 10.03 (1)
  • 10.36 (1)
to
other
Grade
  • KC725M (1)
  • KCPM40 (1)
Tool Unit
  • I (2)
  • M (2)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
  • Indexable Milling
Displaying 1- 2 of 2 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [LI] Insert Length [LI] Insert Length [S] Insert Thickness [S] Insert Thickness [W] Insert Width [W] Insert Width [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM] Cutting Edges per Insert
3684828 EDCT10T331PDERLD EC1031ELD   KC725M 11.5200 .4530 3.7500 .1480 6.7100 .2640     3.1000 .1220 0.0380 .0015 2
    List price:
    $21.02 /each.
    Your price::
    Qty
    5545217 EDCT10T308PDERLD EC1008ELD   KCPM40 12.0500 .4740 3.7500 .1480 6.7400 .2660 1.7000 .0670 0.7900 .0310 0.0380 .0015 2
      List price:
      $21.19 /each.
      Your price::
      Qty
      List price:
      Discount: %
      Your price::
      Replacement This item is not available
      Replacement Product This item may be available through a distributor
      Qty

      Sold in pkg. of

      Grades

      • KC410M

        An extremely hard TiB2-PVD-coated grade that provides very good wear characteristics at higher cutting speeds. KC410M resists edge build up, can help reduce burring, and generates excellent surface finishes. This grade is best suited for aluminium with <10% silicon and other non-ferrous materials.

        N Non-Ferrous
      • KC510M

        A highly wear-resistant TiAiN-PVD-coated carbide grade primarily for use in milling aluminium and high-temperature alloys in light applications. Can also be used for machining steel and hardened steel.

        P Steel
        K Cast Iron
        N Non-Ferrous
        H Hardened Materials
      • KC520M

        A TiAlN-PVD-coated carbide grade developed specifically for general machining of ductile cast iron and can be used with or without coolant.

        K Cast Iron
      • KC522M

        AlTiN-PVD-coated carbide grade engineered to provide better performance in general machining of high-temperature alloys and stainless steel. KC522M resists breakage and offers improved wear resistance and increased strength.

        P Steel
        M Stainless Steel
        K Cast Iron
        S High-Temp Alloys
        H Hardened Materials
      • KC725M

        A high-performance TiAlN-PVD-coated carbide grade for milling steel, stainless steel and ductile cast iron. The good thermal shock resistance of the substrate makes this grade ideal for both wet and dry machining. KC725M is primarily for use in general and heavy machining.

        P Steel
        M Stainless Steel
        S High-Temp Alloys
      • KCK15

        Composition: A multilayered coating with thick MTCVD TiCN-Al2O3 layers applied over a carbide substrate specifically engineered for cast irons.
        Application: Delivers consistent performance in high-speed machining of grey and ductile irons. The substrate design permits the insert to stay in the cut for a long time at high speeds with minimum deformation. The thick CVD coating and post-coat treatment provide superior wear resistance ensuring long and consistent tool life. Can be applied both in straight and lightly interrupted cuts.

        K Cast Iron
      • KCPK30

        A multilayered TiN-TiCN-Al2O3-CVD-coated carbide grade with advanced Beyond™ post-coat treatment and a very tough substrate. KCPK30 has a wide application area in general and rough milling of steels and cast irons. It performs best dry but can also be used wet.

        P Steel
        M Stainless Steel
        K Cast Iron
        S High-Temp Alloys
      • KCPM20

        KCPM20 is a multilayered TiN-MT-TiCN-Al2O3-CVD-coated carbide grade with advanced Beyond™ post-coat treatment. The substrate is a well-balanced combination of wear resistance and toughness. KCPM20 is primarily for light and general machining of steels and stainless steels or roughing of cast irons.

        P Steel
        M Stainless Steel
        K Cast Iron
        H Hardened Materials
      • KCPM40

        Coated carbide grade with an advanced PVD TiAlN/AlCrN coating. Tough substrate with excellent capability at higher temperatures. KCPM40™ is the first choice for milling steel and stainless steel. Good thermal shock resistance makes this grade ideal for both wet and dry machining. Primarily for use in general and heavy machining.

        P Steel
        M Stainless Steel
        S High-Temp Alloys
      • KCSM30

        Submicron substrate coated with high-performance TiAlN-PVD coating is an excellent choice for titanium, but also high-temperature alloys and stainless with higher speeds for light to medium cuts. First choice for application with thin to medium chip thickness, dry and wet.

        P Steel
        M Stainless Steel
        S High-Temp Alloys
        H Hardened Materials
      • KCSM40

        Coated carbide grade with an advanced PVD TiAlN/TiN coating. Premium substrate with newly developed binder composition. KCSM40  is a high-performance grade for titanium, super alloys, and stainless steel. High thermal shock resistance of the substrate makes this grade ideal for wet machining. First choice for roughing and unsuitable cutting conditions.

        P Steel
        M Stainless Steel
        S High-Temp Alloys
      product-image
      Please adjust the following properties from

      ISO Catalog Number

      ANSI Catalog Number

      to find similar products.
      If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
      You are about to create a duplicate . Do you want to proceed?
      You are about to delete Do you want to proceed?
      What would you like to rename your to?
      Please enter a valid name
      Please enter a name for the duplicate
      Please enter a valid name
      You are about to add to your My Solutions page. Do you want to proceed?
      Please enter a valid name
      Send a copy of

      Please enter a valid Email
      Please enter a valid name

      We have found the following CAD Drawings

      Select the files you are looking for and download them all at once

      You should be logged to see your dashboard information
      The product/s () you were trying to add to the cart is/are not available, please contact customer service.
      item(s) successfully added to the cart
      View Cart