successfully added to cart
View Cart

Notifications

Mark all as read
Kendex™ Negative Dimple Inserts
Kendex™ Negative Dimple Inserts
Kendex™ Negative Dimple Inserts
Kendex™ Negative Dimple Inserts
Kendex™ Negative Dimple Inserts
Kendex™ Negative Dimple Inserts

Kendex™ • Negative Inserts • SNGX

Kendex™ Negative Dimple Inserts

Workpiece Materials

K Cast Iron
S High-Temp Alloys
H Hardened Materials
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • K Cast Iron (5)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (5)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (5)
  • S High-Temp Alloys (5)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (5)
  • H Hardened Materials (5)
    • H1
      Hardened Materials 44-48 HRC
      (5)
    • H2
      Hardened Materials 48-55 HRC
      (5)
    • H3
      Hardened Materials 56-60 HRC
      (5)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (2)
  • Lightly Interrupted Cut (2)
  • Smooth Cut (2)
  • Varying Depth of Cut (2)
Corner configuration
Corner Radius
Corner Radius
  • 0.031 in (2)
  • 0.047 in (2)
  • 0.063 in (1)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.8 mm (2)
  • 1.201 mm (2)
  • 1.6 mm (1)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (2)
  • Lightly Interrupted Cut (2)
  • Smooth Cut (2)
  • Varying Depth of Cut (2)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 5 of 5 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius
6770848 SNGX120708S02025 SNGX452S0825 KYHK15B 12.7000 .5000 12.7000 .5000 7.9400 .3125 0.8000 .0312
    List price:
    $19.70 /each.
    Your price::
    Qty
    6770850 SNGX120708S02530 SNGX452S1030 KYHK15B 12.7000 .5000 12.7000 .5000 7.9400 .3125 0.8000 .0312
      List price:
      $19.70 /each.
      Your price::
      Qty
      6770861 SNGX120712S02025 SNGX453S0825 KYHK15B 12.7000 .5000 12.7000 .5000 7.9400 .3125 1.2000 .0468
        List price:
        $19.70 /each.
        Your price::
        Qty
        6770862 SNGX120712S02530 SNGX453S1030 KYHK15B 12.7000 .5000 12.7000 .5000 7.9400 .3125 1.2000 .0468
          List price:
          $19.70 /each.
          Your price::
          Qty
          6770863 SNGX120716S02025 SNGX454S0825 KYHK15B 12.7000 .5000 12.7000 .5000 7.9400 .3125 1.6000 .0625
            List price:
            $19.70 /each.
            Your price::
            Qty
            List price:
            Discount: %
            Your price::
            Replacement This item is not available
            Replacement Product This item may be available through a distributor
            Qty

            Sold in pkg. of

            Grades

            • KB1340

              Composition: A high CBN content, solid PcBN insert having multiple cutting edges.
              Application: Applied in roughing to finishing of fully pearlitic gray cast iron, chilled irons, high-chrome alloyed steels, and heavy cuts in hardened steels (>45 HRC). The solid PcBN insert offers better security and shock resistance compared to tipped PcBN inserts, while also enabling deeper depth-of-cut capabilities.

              K Cast Iron
            • KBK45

              Composition: A PVD TiN coated high CBN content, solid PcBN insert having multiple cutting edges.
              Application: Applied in roughing to finishing of gray and hard cast irons. Also used for finishing chilled cast iron and fully pearlitic cast iron. The solid PcBN insert offers better security and shock resistance compared to tipped PcBN inserts, while also enabling deeper depth-of-cut capabilities.

              K Cast Iron
            • KY1310
            • KY1320

              composition: An uncoated, advanced, silicon nitride grade
              application: High-speed roughing to finishing of gray cast iron.
              The KY1320 grade, with better wear resistance, is an ideal compliment to
              the KY3500 grade.

            • KY1540

              composition: The KY1540 ceramic is the latest and most advanced
              sialon material ever developed.
              application: Combines excellent wear properties, fracture toughness,
              and thermal shock resistance for general purpose to finish machining
              of high-temperature alloys. Provides superior depth-of-cut notch
              resistance as compared to whisker ceramics.

              S High-Temp Alloys
            • KY1615

              Composition: An advanced Alumina/TiC black ceramic grade.
              Application: Great combination of toughness and wear resistance; used for machining alloy steels, tool steels, and stainless steels to 60 HRC (653 HB). It is also applied in finish turning and boring of cast irons.

              H Hardened Materials
            • KY3400

              composition: CVD-coated pure silicon nitride grade.
              application: Excellent combination of toughness and edge wear
              resistance; used for general purpose machining of gray cast irons
              and ductile or nodular cast irons.

            • KY3500

              A ceramic cutting material based on micro-grain Si3N4 primarily for use in light to general machining of gray cast iron and ferritic ductile cast iron. Dry machining is preferred while using this grade.

              K Cast Iron
            • KYHK15B

              Composition: A PVD coated mixed aluminum oxide composite ceramic (Al2O3) with embedded fine-grained titanium carbonitride (TiCN).
              Application: KYHK15B is suitable for turning hardened steels (45 HRC–60 HRC), finishing of cast irons and high temperature alloys. This advanced ceramic offers maximum edge strength and excellent wear resistance by achieving performance to compete with CBN.

              S High-Temp Alloys
              H Hardened Materials
              K Cast Iron
            • KYK10

              Composition: An advanced SiAlON ceramic grade.
              Application: Provides maximum wear resistance. Used for high-speed continuous turning of gray cast iron, including through scale. To be used for varying cast iron machinability.

              K Cast Iron
            • KYK25

              Composition: Pure silicon nitride ceramic with an alumina CVD coating.
              Application: Excellent combination of toughness and edge wear resistance. Used for general purpose machining of gray, ductile, or nodular cast irons. To be used for varying cast iron machinability.

              K Cast Iron
            • KYK35

              Composition: Pure silicon nitride grade.
              Application: Maximum toughness; used at high feed rates for rough machining of grey cast iron,
              including machining through interruptions.

            • KYS25

              Composition: SiAlON ceramic with a multi-layered alumina-TiCN CVD coating.
              Application: Compliments the KYS30 grade when machining high-temp and nickel-based alloys and cast materials with high Brinell hardness. This advanced CVD coating provides excellent chemical and depth-of-cut notch resistance compared to whisker ceramics.

              S High-Temp Alloys
            • KYS30

              KYS30™ is the latest in the line of α/βSiAlON grades for general purpose to finish machining of high-temperature alloys. This grade provides excellent wear characteristics, with better toughness and thermal shock resistance than whisker ceramics. KYS30 also gives improved thermal stability.

              S High-Temp Alloys
            product-image
            Please adjust the following properties from

            ISO Catalog Number

            ANSI Catalog Number

            to find similar products.
            You are about to create a duplicate . Do you want to proceed?
            You are about to delete Do you want to proceed?
            What would you like to rename your to?
            Please enter a valid name
            Please enter a name for the duplicate
            Please enter a valid name
            You are about to add to your My Solutions page. Do you want to proceed?
            Please enter a valid name
            Send a copy of

            Please enter a valid Email
            Please enter a valid name

            The following CAD files are available

            Please select a file to download

            You should be logged to see your dashboard information
            Session expired due to inactivity, please login again
            The product/s () you were trying to add to the cart is/are not available, please contact customer service.
            item(s) successfully added to the cart
            View Cart