successfully added to cart
View Cart

Notifications

Mark all as read
Read More

 

 

KOR5 DA

 Proprietary flute forms reduce vibrations and improve tool life. 

  • Dynamic rougher for aluminum.
  • With chip splitters for near-perfect chip management.
  • Safe-Lock™ shanks available for pullout protection.
  • Available with and without internal coolant.

 

Shown in the Video:

  • Internal coolant helps flush chips from cutting zone and reduce heat.
  • 5 cutting edges enable increased feed rates and high metal removal rates.
  • Chipbreakers manage chip removal efficiently.
  • Proprietary flute form ensures coolant flow, chip evacuation, and a 3 x D maximum depth-of-cut.
  • Up to 66% higher table feed in aluminum applications.
  • Safe-Lock™ Shank prevents end mill pullout.

 

 

KOR5 DS

 Helix angles tailored to target material to minimize vibration and optimize tool life. 

  • Dynamic rougher for steel and stainless steel.
  • With chip deformers for near-perfect chip management at high surface quality.
  • Safe-Lock™ and Weldon® shanks for pullout protection.
  • 3 x D and 5 x D with plain and Weldon shanks.

 

 

KOR6 DT

 Front end geometries for maximum tool life in helical and ramping operations. 

  • Dynamic rougher for titanium.
  • With chip splitters for optimized chip management.
  • 3 x D and 5 x D with plain and Weldon shanks.
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (48)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (48)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (48)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (48)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (48)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (48)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (48)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (48)
  • M Stainless Steel (48)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (48)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (48)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (48)
  • K Cast Iron (48)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (48)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (48)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (48)
  • N Non-Ferrous Materials (80)
    • N1
      Wrought Aluminum
      (80)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (80)
  • S High-Temp Alloys (48)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (48)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (48)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (48)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (48)
  • H Hardened Materials (48)
    • H1
      Hardened Materials 44-48 HRC
      (48)
    • H2
      Hardened Materials 48-55 HRC
      (48)
Applications
Applications
  • Pocket Helical Pocket Helical (128)
  • Pocket Milling Pocket Milling (128)
  • Ramping Ramping (59)
  • Shoulder Milling Shoulder Milling (128)
  • Shoulder Roughing Shoulder Roughing (59)
  • Shoulder Square End Shoulder Square End (128)
  • Trochoidal Milling Trochoidal Milling (107)
Cutting Diameter
Cutting Diameter
  • 0.25 in (4)
  • 0.315 in (4)
  • 0.375 in (12)
  • 0.394 in (12)
  • 0.473 in (14)
  • 0.5 in (12)
  • 0.625 in (12)
  • 0.63 in (12)
  • 0.75 in (14)
  • 0.787 in (10)
  • 0.984 in (10)
  • 1.0 in (12)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 6.351 mm (4)
  • 8.0 mm (4)
  • 9.525 mm (12)
  • 10.0 mm (12)
  • 12.0 mm (14)
  • 12.701 mm (12)
  • 15.875 mm (12)
  • 16.0 mm (12)
  • 19.05 mm (14)
  • 20.0 mm (10)
  • 25.0 mm (10)
  • 25.401 mm (12)
Cutting Diameter Min to Cutting Diameter Max
Cutting Length
Cutting Length
  • 19.05 mm (2)
  • 24.0 mm (2)
  • 28.576 mm (10)
  • 30.0 mm (10)
  • 31.75 mm (2)
  • 36.0 mm (12)
  • 38.1 mm (10)
  • 40.0 mm (2)
  • 47.625 mm (12)
  • 48.0 mm (10)
  • 50.0 mm (2)
  • 57.151 mm (12)
  • 60.0 mm (10)
  • 63.5 mm (2)
  • 75.0 mm (8)
  • 76.2 mm (10)
  • 79.375 mm (2)
  • 80.0 mm (2)
  • 95.25 mm (2)
  • 100.0 mm (2)
  • 125.0 mm (2)
  • 127.0 mm (2)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.75 in (2)
  • 0.946 in (2)
  • 1.125 in (10)
  • 1.181 in (10)
  • 1.25 in (2)
  • 1.417 in (12)
  • 1.5 in (10)
  • 1.575 in (2)
  • 1.875 in (12)
  • 1.891 in (10)
  • 1.969 in (2)
  • 2.25 in (12)
  • 2.362 in (10)
  • 2.5 in (2)
  • 2.953 in (8)
  • 3.0 in (10)
  • 3.125 in (2)
  • 3.15 in (2)
  • 3.75 in (2)
  • 3.938 in (2)
  • 4.921 in (2)
  • 5.0 in (2)
Cutting Length Min to Cutting Length Max
Connection Style
Connection Style
  • SAFE-LOCK (64)
  • Straight-Cylindrical (40)
  • Weldon (24)
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Style
Corner Style
  • RADIUS (108)
  • SQUARE END (20)
Corner Radius
Corner Radius
  • 0.0 in (20)
  • 0.008 in (4)
  • 0.015 in (4)
  • 0.02 in (18)
  • 0.03 in (30)
  • 0.039 in (14)
  • 0.06 in (20)
  • 0.079 in (2)
  • 0.09 in (6)
  • 0.098 in (8)
  • 0.12 in (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (20)
  • 0.2 mm (4)
  • 0.375 mm (4)
  • 0.5 mm (18)
  • 0.75 mm (30)
  • 1.0 mm (14)
  • 1.5 mm (2)
  • 1.526 mm (18)
  • 2.0 mm (2)
  • 2.275 mm (6)
  • 2.5 mm (8)
  • 3.051 mm (2)
Corner Radius Min to Corner Radius Max
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K600 (80)
  • KC643M (48)
Rough Finish
Rough Finish
  • FBS (116)
  • F (12)
Maximum Ramp Angle
Maximum Ramp Angle
  • 4.0 (38)
  • 5.0 (12)
Maximum Ramp Angle Min to Maximum Ramp Angle Max
Front-End
Center Cutting
Center Cutting
Back-End
Back-End Diameter
Back-End Diameter
  • 6.351 mm (4)
  • 8.0 mm (4)
  • 9.525 mm (12)
  • 10.0 mm (12)
  • 12.0 mm (14)
  • 12.701 mm (12)
  • 15.875 mm (12)
  • 16.0 mm (12)
  • 19.05 mm (14)
  • 20.0 mm (10)
  • 25.0 mm (10)
  • 25.401 mm (12)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.25 in (4)
  • 0.315 in (4)
  • 0.375 in (12)
  • 0.394 in (12)
  • 0.473 in (14)
  • 0.5 in (12)
  • 0.625 in (12)
  • 0.63 in (12)
  • 0.75 in (14)
  • 0.787 in (10)
  • 0.984 in (10)
  • 1.0 in (12)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Solid Carbide End Milling

KOR5™ DS Solid Carbide End Mill for Dynamic Milling of Steel and Stainless Steel
(6 Products)
  • Trochoidal MillingTrochoidal Milling
  • Tool Dimensions: Flute Configuration: 5Tool Dimensions: Flute Configuration: 5
  • Helix Angle: 40°Helix Angle: 40°
  • Corner Style: Corner RadiusCorner Style: Corner Radius
  • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
  • Shank - Cylindrical  PlainShank - Cylindrical Plain
  • Ramping: 5°Ramping: 5°
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Adapter Style Machine Side [Re] Corner Radius [Re] Corner Radius [Z] Number of Flutes [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length
6769720 KOR5RA0250R075HAR030 KOR5RA0250R075HAR030 KC643M Straight-Cylindrical 0.7620 .0300 5 6.3500 .2500 6.35 .25 19.0500 .7500 63.5000 2.500
    List price:
    $51.60 /each.
    Your price::
    Qty
    6769781 KOR5RA0375R113HAR030 KOR5RA0375R113HAR030 KC643M Straight-Cylindrical 0.7620 .0300 5 9.5250 .3750 9.525 .375 28.5750 1.125 76.2000 3.000
      List price:
      $85.57 /each.
      Your price::
      Qty
      6769782 KOR5RA0500R150HAR030 KOR5RA0500R150HAR030 KC643M Straight-Cylindrical 0.7620 .0300 5 12.7000 .5000 12.7 .5 38.1000 1.500 88.9000 3.500
        List price:
        $117.76 /each.
        Your price::
        Qty
        6769783 KOR5RA0625R188HAR030 KOR5RA0625R188HAR030 KC643M Straight-Cylindrical 0.7620 .0300 5 15.8750 .6250 15.875 .625 47.6250 1.875 101.6000 4.000
          List price:
          $230.96 /each.
          Your price::
          Qty
          6769784 KOR5RA0750R225HAR060 KOR5RA0750R225HAR060 KC643M Straight-Cylindrical 1.5240 .0600 5 19.0500 .7500 19.05 .75 57.1500 2.250 127.0000 5.000
            List price:
            $373.45 /each.
            Your price::
            Qty
            6769785 KOR5RA1000R300HAR060 KOR5RA1000R300HAR060 KC643M Straight-Cylindrical 1.5240 .0600 5 25.4000 1.000 25.4 1.0 76.2000 3.000 152.4000 6.000
              List price:
              $546.44 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is no longer available
              Replacement Product Please contact customer service for assistance
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              Solid Carbide End Milling

              KOR5™ DS Solid Carbide End Mill for Dynamic Milling of Steel and Stainless Steel
              (6 Products)
              • Helix Angle: 40°Helix Angle: 40°
              • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
              • Tool Dimensions: Flute Configuration: 5Tool Dimensions: Flute Configuration: 5
              • Corner Style: Corner RadiusCorner Style: Corner Radius
              • Trochoidal MillingTrochoidal Milling
              • Shank - Cylindrical  WeldonShank - Cylindrical Weldon
              • Ramping: 5°Ramping: 5°
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Adapter Style Machine Side [Re] Corner Radius [Re] Corner Radius [Z] Number of Flutes [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length
              6769786 KOR5RA0250R075HBR030 KOR5RA0250R075HBR030 KC643M Weldon 0.7620 .0300 5 6.3500 .2500 6.35 .25 19.0500 .7500 63.5000 2.500
                List price:
                $52.63 /each.
                Your price::
                Qty
                6769787 KOR5RA0375R113HBR030 KOR5RA0375R113HBR030 KC643M Weldon 0.7620 .0300 5 9.5250 .3750 9.525 .375 28.5750 1.125 76.2000 3.000
                  List price:
                  $87.28 /each.
                  Your price::
                  Qty
                  6769789 KOR5RA0500R150HBR030 KOR5RA0500R150HBR030 KC643M Weldon 0.7620 .0300 5 12.7000 .5000 12.7 .5 38.1000 1.500 88.9000 3.500
                    List price:
                    $120.11 /each.
                    Your price::
                    Qty
                    6769790 KOR5RA0625R188HBR030 KOR5RA0625R188HBR030 KC643M Weldon 0.7620 .0300 5 15.8750 .6250 15.875 .625 47.6250 1.875 101.6000 4.000
                      List price:
                      $235.60 /each.
                      Your price::
                      Qty
                      6769791 KOR5RA0750R225HBR060 KOR5RA0750R225HBR060 KC643M Weldon 1.5240 .0600 5 19.0500 .7500 19.05 .75 57.1500 2.250 127.0000 5.000
                        List price:
                        $380.93 /each.
                        Your price::
                        Qty
                        6769792 KOR5RA1000R300HBR060 KOR5RA1000R300HBR060 KC643M Weldon 1.5240 .0600 5 25.4000 1.000 25.4 1.0 76.2000 3.000 152.4000 6.000
                          List price:
                          $557.38 /each.
                          Your price::
                          Qty
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is no longer available
                          Replacement Product Please contact customer service for assistance
                          Qty

                          Sold in pkg. of

                          ORIGINAL PRODUCT

                          Solid Carbide End Milling

                          KOR5™ DS Solid Carbide End Mill for Dynamic Milling of Steel and Stainless Steel
                          (6 Products)
                          • Tool Dimensions: Flute Configuration: 5Tool Dimensions: Flute Configuration: 5
                          • Shank - Cylindrical  PlainShank - Cylindrical Plain
                          • Corner Style: Corner RadiusCorner Style: Corner Radius
                          • Helix Angle: 40°Helix Angle: 40°
                          • Trochoidal MillingTrochoidal Milling
                          • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
                          • Ramping: 5°Ramping: 5°
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Adapter Style Machine Side [Re] Corner Radius [Re] Corner Radius [Z] Number of Flutes [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length
                          6764360 KOR5RA0250L125HAR030 KOR5RA0250L125HAR030 KC643M Straight-Cylindrical 0.7620 .0300 5 6.3500 .2500 6.35 .25 31.7500 1.250 76.2000 3.000
                            List price:
                            $61.91 /each.
                            Your price::
                            Qty
                            6764471 KOR5RA0375L188HAR030 KOR5RA0375L188HAR030 KC643M Straight-Cylindrical 0.7620 .0300 5 9.5250 .3750 9.525 .375 47.6250 1.875 101.6000 4.000
                              List price:
                              $102.68 /each.
                              Your price::
                              Qty
                              6764472 KOR5RA0500L250HAR030 KOR5RA0500L250HAR030 KC643M Straight-Cylindrical 0.7620 .0300 5 12.7000 .5000 12.7 .5 63.5000 2.500 127.0000 5.000
                                List price:
                                $141.30 /each.
                                Your price::
                                Qty
                                6764473 KOR5RA0625L313HAR030 KOR5RA0625L313HAR030 KC643M Straight-Cylindrical 0.7620 .0300 5 15.8750 .6250 15.875 .625 79.3750 3.125 152.4000 6.000
                                  List price:
                                  $288.71 /each.
                                  Your price::
                                  Qty
                                  6764474 KOR5RA0750L375HAR060 KOR5RA0750L375HAR060 KC643M Straight-Cylindrical 1.5240 .0600 5 19.0500 .7500 19.05 .75 95.2500 3.750 177.8000 7.000
                                    List price:
                                    $448.14 /each.
                                    Your price::
                                    Qty
                                    6764475 KOR5RA1000L500HAR060 KOR5RA1000L500HAR060 KC643M Straight-Cylindrical 1.5240 .0600 5 25.4000 1.000 25.4 1.0 127.0000 5.000 190.5000 7.500
                                      List price:
                                      $655.74 /each.
                                      Your price::
                                      Qty
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is no longer available
                                      Replacement Product Please contact customer service for assistance
                                      Qty

                                      Sold in pkg. of

                                      ORIGINAL PRODUCT

                                      Solid Carbide End Milling

                                      KOR5™ DS Solid Carbide End Mill for Dynamic Milling of Steel and Stainless Steel
                                      (6 Products)
                                      • Trochoidal MillingTrochoidal Milling
                                      • Tool Dimensions: Flute Configuration: 5Tool Dimensions: Flute Configuration: 5
                                      • Corner Style: Corner RadiusCorner Style: Corner Radius
                                      • Helix Angle: 40°Helix Angle: 40°
                                      • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
                                      • Shank - Cylindrical  WeldonShank - Cylindrical Weldon
                                      • Ramping: 5°Ramping: 5°
                                      View Products
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Adapter Style Machine Side [Re] Corner Radius [Re] Corner Radius [Z] Number of Flutes [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length
                                      6764476 KOR5RA0250L125HBR030 KOR5RA0250L125HBR030 KC643M Weldon 0.7620 .0300 5 6.3500 .2500 6.35 .25 31.7500 1.250 76.2000 3.000
                                        List price:
                                        $63.15 /each.
                                        Your price::
                                        Qty
                                        6764477 KOR5RA0375L188HBR030 KOR5RA0375L188HBR030 KC643M Weldon 0.7620 .0300 5 9.5250 .3750 9.525 .375 47.6250 1.875 101.6000 4.000
                                          List price:
                                          $104.75 /each.
                                          Your price::
                                          Qty
                                          6764478 KOR5RA0500L250HBR030 KOR5RA0500L250HBR030 KC643M Weldon 0.7620 .0300 5 12.7000 .5000 12.7 .5 63.5000 2.500 127.0000 5.000
                                            List price:
                                            $144.13 /each.
                                            Your price::
                                            Qty
                                            6764479 KOR5RA0625L313HBR030 KOR5RA0625L313HBR030 KC643M Weldon 0.7620 .0300 5 15.8750 .6250 15.875 .625 79.3750 3.125 152.4000 6.000
                                              List price:
                                              $294.50 /each.
                                              Your price::
                                              Qty
                                              6764480 KOR5RA0750L375HBR060 KOR5RA0750L375HBR060 KC643M Weldon 1.5240 .0600 5 19.0500 .7500 19.05 .75 95.2500 3.750 177.8000 7.000
                                                List price:
                                                $457.10 /each.
                                                Your price::
                                                Qty
                                                6764491 KOR5RA1000L500HBR060 KOR5RA1000L500HBR060 KC643M Weldon 1.5240 .0600 5 25.4000 1.000 25.4 1.0 127.0000 5.000 190.5000 7.500
                                                  List price:
                                                  $668.87 /each.
                                                  Your price::
                                                  Qty
                                                  List price:
                                                  Discount: %
                                                  Your price::
                                                  Replacement This item is no longer available
                                                  Replacement Product Please contact customer service for assistance
                                                  Qty

                                                  Sold in pkg. of

                                                  ORIGINAL PRODUCT

                                                  Solid Carbide End Milling

                                                  KOR5™ DA Solid Carbide End Mill for Dynamic Milling of Aluminum
                                                  (3 Products)
                                                  • Ramping: 4°Ramping: 4°
                                                  • Side Milling/Shoulder Milling: FinishingSide Milling/Shoulder Milling: Finishing
                                                  • Helix Angle: 35°Helix Angle: 35°
                                                  • Through Coolant - Solid End MillThrough Coolant - Solid End Mill
                                                  • Shank - Cylindrical  PlainShank - Cylindrical Plain
                                                  • Side Milling/Shoulder Milling: RoughingSide Milling/Shoulder Milling: Roughing
                                                  • Corner Style: Corner RadiusCorner Style: Corner Radius
                                                  • Corner Style: Square EndCorner Style: Square End
                                                  • Trochoidal MillingTrochoidal Milling
                                                  • Tool Dimensions: Flute Configuration: 5Tool Dimensions: Flute Configuration: 5
                                                  View Products
                                                  SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Adapter Style Machine Side [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length [Re] Corner Radius [Re] Corner Radius [Z] Number of Flutes
                                                  6754973 KOR5RA1000R030HAR020IM KOR5RA1000R030HAR020IM K600 Straight-Cylindrical 10.0000 .3937 10.0 .3937 30.0000 1.181 75.0000 2.952 0.2000 .0079 5
                                                    List price:
                                                    $132.10 /each.
                                                    Your price::
                                                    Qty
                                                    6754974 KOR5RA1000R030HAR050IM KOR5RA1000R030HAR050IM K600 Straight-Cylindrical 10.0000 .3937 10.0 .3937 30.0000 1.181 75.0000 2.952 0.5000 .0197 5
                                                      List price:
                                                      $132.10 /each.
                                                      Your price::
                                                      Qty
                                                      6754975 KOR5RA1000R030HAR100IM KOR5RA1000R030HAR100IM K600 Straight-Cylindrical 10.0000 .3937 10.0 .3937 30.0000 1.181 75.0000 2.952 1.0000 .0394 5
                                                        List price:
                                                        $132.10 /each.
                                                        Your price::
                                                        Qty
                                                        List price:
                                                        Discount: %
                                                        Your price::
                                                        Replacement This item is no longer available
                                                        Replacement Product Please contact customer service for assistance
                                                        Qty

                                                        Sold in pkg. of

                                                        ORIGINAL PRODUCT

                                                        Solid Carbide End Milling

                                                        KOR5™ DA Solid Carbide End Mill for Dynamic Milling of Aluminum
                                                        (1 Products)
                                                        • Corner Style: Corner RadiusCorner Style: Corner Radius
                                                        • Tool Dimensions: Flute Configuration: 5Tool Dimensions: Flute Configuration: 5
                                                        • Side Milling/Shoulder Milling: RoughingSide Milling/Shoulder Milling: Roughing
                                                        • Trochoidal MillingTrochoidal Milling
                                                        • Shank - Cylindrical  PlainShank - Cylindrical Plain
                                                        • Through Coolant - Solid End MillThrough Coolant - Solid End Mill
                                                        • Corner Style: Square EndCorner Style: Square End
                                                        • Ramping: 4°Ramping: 4°
                                                        • Side Milling/Shoulder Milling: FinishingSide Milling/Shoulder Milling: Finishing
                                                        • Helix Angle: 35°Helix Angle: 35°
                                                        View Products
                                                        SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Adapter Style Machine Side [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length [Z] Number of Flutes
                                                        6754972 KOR5SE1000R030HAIM KOR5SE1000R030HAIM K600 Straight-Cylindrical 10.0000 .3937 10.0 .3937 30.0000 1.181 75.0000 2.952 5
                                                          List price:
                                                          $114.84 /each.
                                                          Your price::
                                                          Qty
                                                          List price:
                                                          Discount: %
                                                          Your price::
                                                          Replacement This item is no longer available
                                                          Replacement Product Please contact customer service for assistance
                                                          Qty

                                                          Sold in pkg. of

                                                          ORIGINAL PRODUCT

                                                          Solid Carbide End Milling

                                                          KOR5™ DA Solid Carbide End Mill for Dynamic Milling of Aluminum
                                                          (11 Products)
                                                          • Ramping: 4°Ramping: 4°
                                                          • Corner Style: Corner RadiusCorner Style: Corner Radius
                                                          • Trochoidal MillingTrochoidal Milling
                                                          • Through Coolant - Solid End MillThrough Coolant - Solid End Mill
                                                          • Corner Style: Square EndCorner Style: Square End
                                                          • Side Milling/Shoulder Milling: RoughingSide Milling/Shoulder Milling: Roughing
                                                          • Side Milling/Shoulder Milling: FinishingSide Milling/Shoulder Milling: Finishing
                                                          • Helix Angle: 35°Helix Angle: 35°
                                                          • Tool Dimensions: Flute Configuration: 5Tool Dimensions: Flute Configuration: 5
                                                          • SAFE-LOCK ShankSAFE-LOCK Shank
                                                          View Products
                                                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Adapter Style Machine Side [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length [Re] Corner Radius [Re] Corner Radius [Z] Number of Flutes
                                                          6754978 KOR5RA1200R036SLR050IM KOR5RA1200R036SLR050IM K600 SAFE-LOCK 12.0000 .4724 12.0 .4724 36.0000 1.417 87.0000 3.425 0.5000 .0197 5
                                                            List price:
                                                            $171.92 /each.
                                                            Your price::
                                                            Qty
                                                            6754980 KOR5RA1200R036SLR250IM KOR5RA1200R036SLR250IM K600 SAFE-LOCK 12.0000 .4724 12.0 .4724 36.0000 1.417 87.0000 3.425 2.5000 .0984 5
                                                              List price:
                                                              $171.92 /each.
                                                              Your price::
                                                              Qty
                                                              6755003 KOR5RA1600R048SLR200IM KOR5RA1600R048SLR200IM K600 SAFE-LOCK 16.0000 .6299 16.0 .6299 48.0000 1.889 104.0000 4.094 2.0000 .0787 5
                                                                List price:
                                                                $275.58 /each.
                                                                Your price::
                                                                Qty
                                                                6755006 KOR5RA2000R060SLR050IM KOR5RA2000R060SLR050IM K600 SAFE-LOCK 20.0000 .7874 20.0 .7874 60.0000 2.362 120.0000 4.724 0.5000 .0197 5
                                                                  List price:
                                                                  $407.27 /each.
                                                                  Your price::
                                                                  Qty
                                                                  6755009 KOR5RA2500R075SLR050IM KOR5RA2500R075SLR050IM K600 SAFE-LOCK 25.0000 .9843 25.0 .9843 75.0000 2.952 144.0000 5.669 0.5000 .0197 5
                                                                    List price:
                                                                    $488.73 /each.
                                                                    Your price::
                                                                    Qty
                                                                    6755010 KOR5RA2500R075SLR250IM KOR5RA2500R075SLR250IM K600 SAFE-LOCK 25.0000 .9843 25.0 .9843 75.0000 2.952 144.0000 5.669 2.5000 .0984 5
                                                                      List price:
                                                                      $488.73 /each.
                                                                      Your price::
                                                                      Qty
                                                                      List price:
                                                                      Discount: %
                                                                      Your price::
                                                                      Replacement This item is no longer available
                                                                      Replacement Product Please contact customer service for assistance
                                                                      Qty

                                                                      Sold in pkg. of

                                                                      ORIGINAL PRODUCT

                                                                      Solid Carbide End Milling

                                                                      KOR5™ DA Solid Carbide End Mill for Dynamic Milling of Aluminum
                                                                      (4 Products)
                                                                      • Corner Style: Corner RadiusCorner Style: Corner Radius
                                                                      • Ramping: 4°Ramping: 4°
                                                                      • Side Milling/Shoulder Milling: RoughingSide Milling/Shoulder Milling: Roughing
                                                                      • Helix Angle: 35°Helix Angle: 35°
                                                                      • Through Coolant - Solid End MillThrough Coolant - Solid End Mill
                                                                      • SAFE-LOCK ShankSAFE-LOCK Shank
                                                                      • Tool Dimensions: Flute Configuration: 5Tool Dimensions: Flute Configuration: 5
                                                                      • Corner Style: Square EndCorner Style: Square End
                                                                      • Side Milling/Shoulder Milling: FinishingSide Milling/Shoulder Milling: Finishing
                                                                      • Trochoidal MillingTrochoidal Milling
                                                                      View Products
                                                                      SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Adapter Style Machine Side [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length [Z] Number of Flutes
                                                                      6754976 KOR5SE1200R036SLIM KOR5SE1200R036SLIM K600 SAFE-LOCK 12.0000 .4724 12.0 .4724 36.0000 1.417 87.0000 3.425 5
                                                                        List price:
                                                                        $156.40 /each.
                                                                        Your price::
                                                                        Qty
                                                                        6755001 KOR5SE1600R048SLIM KOR5SE1600R048SLIM K600 SAFE-LOCK 16.0000 .6299 16.0 .6299 48.0000 1.889 104.0000 4.094 5
                                                                          List price:
                                                                          $245.92 /each.
                                                                          Your price::
                                                                          Qty
                                                                          6755005 KOR5SE2000R060SLIM KOR5SE2000R060SLIM K600 SAFE-LOCK 20.0000 .7874 20.0 .7874 60.0000 2.362 120.0000 4.724 5
                                                                            List price:
                                                                            $354.12 /each.
                                                                            Your price::
                                                                            Qty
                                                                            6755008 KOR5SE2500R075SLIM KOR5SE2500R075SLIM K600 SAFE-LOCK 25.0000 .9843 25.0 .9843 75.0000 2.952 144.0000 5.669 5
                                                                              List price:
                                                                              $424.94 /each.
                                                                              Your price::
                                                                              Qty
                                                                              List price:
                                                                              Discount: %
                                                                              Your price::
                                                                              Replacement This item is no longer available
                                                                              Replacement Product Please contact customer service for assistance
                                                                              Qty

                                                                              Sold in pkg. of

                                                                              ORIGINAL PRODUCT

                                                                              Solid Carbide End Milling

                                                                              KOR5™ DA Solid Carbide End Mill for Dynamic Milling of Aluminum
                                                                              (3 Products)
                                                                              • Side Milling/Shoulder Milling: RoughingSide Milling/Shoulder Milling: Roughing
                                                                              • Shank - Cylindrical  PlainShank - Cylindrical Plain
                                                                              • Corner Style: Corner RadiusCorner Style: Corner Radius
                                                                              • Side Milling/Shoulder Milling: FinishingSide Milling/Shoulder Milling: Finishing
                                                                              • Trochoidal MillingTrochoidal Milling
                                                                              • Tool Dimensions: Flute Configuration: 5Tool Dimensions: Flute Configuration: 5
                                                                              • Helix Angle: 35°Helix Angle: 35°
                                                                              • Corner Style: Square EndCorner Style: Square End
                                                                              • Ramping: 4°Ramping: 4°
                                                                              View Products
                                                                              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Adapter Style Machine Side [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length [Re] Corner Radius [Re] Corner Radius [Z] Number of Flutes
                                                                              6755013 KOR5RA1000R030HAR020CM KOR5RA1000R030HAR020CM K600 Straight-Cylindrical 10.0000 .3937 10.0 .3937 30.0000 1.181 75.0000 2.952 0.2000 .0079 5
                                                                                List price:
                                                                                $79.26 /each.
                                                                                Your price::
                                                                                Qty
                                                                                6755014 KOR5RA1000R030HAR050CM KOR5RA1000R030HAR050CM K600 Straight-Cylindrical 10.0000 .3937 10.0 .3937 30.0000 1.181 75.0000 2.952 0.5000 .0197 5
                                                                                  List price:
                                                                                  $79.26 /each.
                                                                                  Your price::
                                                                                  Qty
                                                                                  6755015 KOR5RA1000R030HAR100CM KOR5RA1000R030HAR100CM K600 Straight-Cylindrical 10.0000 .3937 10.0 .3937 30.0000 1.181 75.0000 2.952 1.0000 .0394 5
                                                                                    List price:
                                                                                    $79.26 /each.
                                                                                    Your price::
                                                                                    Qty
                                                                                    List price:
                                                                                    Discount: %
                                                                                    Your price::
                                                                                    Replacement This item is no longer available
                                                                                    Replacement Product Please contact customer service for assistance
                                                                                    Qty

                                                                                    Sold in pkg. of

                                                                                    ORIGINAL PRODUCT

                                                                                    Solid Carbide End Milling

                                                                                    KOR5™ DA Solid Carbide End Mill for Dynamic Milling of Aluminum
                                                                                    (1 Products)
                                                                                    • Shank - Cylindrical  PlainShank - Cylindrical Plain
                                                                                    • Tool Dimensions: Flute Configuration: 5Tool Dimensions: Flute Configuration: 5
                                                                                    • Side Milling/Shoulder Milling: RoughingSide Milling/Shoulder Milling: Roughing
                                                                                    • Trochoidal MillingTrochoidal Milling
                                                                                    • Corner Style: Corner RadiusCorner Style: Corner Radius
                                                                                    • Corner Style: Square EndCorner Style: Square End
                                                                                    • Ramping: 4°Ramping: 4°
                                                                                    • Side Milling/Shoulder Milling: FinishingSide Milling/Shoulder Milling: Finishing
                                                                                    • Helix Angle: 35°Helix Angle: 35°
                                                                                    View Products
                                                                                    SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Adapter Style Machine Side [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length [Z] Number of Flutes
                                                                                    6755012 KOR5SE1000R030HACM KOR5SE1000R030HACM K600 Straight-Cylindrical 10.0000 .3937 10.0 .3937 30.0000 1.181 75.0000 2.952 5
                                                                                      List price:
                                                                                      $68.91 /each.
                                                                                      Your price::
                                                                                      Qty
                                                                                      List price:
                                                                                      Discount: %
                                                                                      Your price::
                                                                                      Replacement This item is no longer available
                                                                                      Replacement Product Please contact customer service for assistance
                                                                                      Qty

                                                                                      Sold in pkg. of

                                                                                      ORIGINAL PRODUCT

                                                                                      Solid Carbide End Milling

                                                                                      KOR5™ DA Solid Carbide End Mill for Dynamic Milling of Aluminum
                                                                                      (4 Products)
                                                                                      • Ramping: 4°Ramping: 4°
                                                                                      • Tool Dimensions: Flute Configuration: 5Tool Dimensions: Flute Configuration: 5
                                                                                      • Helix Angle: 35°Helix Angle: 35°
                                                                                      • Side Milling/Shoulder Milling: FinishingSide Milling/Shoulder Milling: Finishing
                                                                                      • Side Milling/Shoulder Milling: RoughingSide Milling/Shoulder Milling: Roughing
                                                                                      • Corner Style: Square EndCorner Style: Square End
                                                                                      • SAFE-LOCK ShankSAFE-LOCK Shank
                                                                                      • Corner Style: Corner RadiusCorner Style: Corner Radius
                                                                                      • Trochoidal MillingTrochoidal Milling
                                                                                      View Products
                                                                                      SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Adapter Style Machine Side [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length [Z] Number of Flutes