A4™ Grooving and Cut-Off
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (19)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(19)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(19)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(19)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(19)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(19)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(19)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(19)
- M Stainless Steel (19)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(19)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(19)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(19)
- K Cast Iron (19)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(19)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(19)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(19)
- N Non-Ferrous Materials (19)
- N1Wrought Aluminum (19)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(19)
- N3High-Silicon Aluminum Alloys Si >12.2%(11)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (19)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (19)
- N6Carbon, Graphite Composites, CFRP (19)
- N7MMC's (11)
- S High-Temp Alloys (19)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(19)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(19)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(19)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(19)
- H Hardened Materials (16)
- H1Hardened Materials 44-48 HRC(16)
- H2Hardened Materials 48-55 HRC(16)
- H3Hardened Materials 56-60 HRC(11)
- H4Hardened Materials >60 HRC(11)
Applications
Applications
Grooving (19)
ID Grooving (4)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (19)
- Lightly Interrupted Cut (19)
- Smooth Cut (19)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (11)
- 2.0 (19)
to
Over All Length [L]
Over All Length [L]
- 1.181 in(18)
- 1.379 in(1)
to
Over All Length [L]
Over All Length [L]
- 30.0 mm(18)
- 35.0 mm(1)
to
Corner Radius
Corner Radius
- 0.006 in(3)
- 0.008 in(14)
- 0.016 in(11)
- 0.031 in(6)
- 0.034 in(4)
- 0.039 in(4)
- 0.041 in(4)
- 0.06 in(5)
- 0.063 in(5)
- 0.079 in(4)
- 0.08 in(4)
- 0.094 in(4)
- 0.098 in(2)
- 0.099 in(2)
to
Corner Radius
Corner Radius
- 0.151 mm(3)
- 0.2 mm(14)
- 0.4 mm(11)
- 0.8 mm(6)
- 0.851 mm(4)
- 1.0 mm(4)
- 1.05 mm(4)
- 1.5 mm(5)
- 1.526 mm(5)
- 1.6 mm(5)
- 2.0 mm(4)
- 2.025 mm(4)
- 2.375 mm(4)
- 2.5 mm(2)
- 2.526 mm(2)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K1025 (4)
- K313 (16)
- KB1630 (11)
- KB5625 (11)
- KBH20 (11)
- KC5010 (16)
- KC5025 (19)
- KC9110 (16)
- KC9125 (16)
- KCK20 (11)
- KCP10 (15)
- KCP25 (16)
- KCU10 (16)
- KCU10B (16)
- KCU25 (19)
- KD1405 (11)
- KMS (7)
- KT315 (16)
- KU10 (15)
- KU30T (11)
- KY3500 (11)
- KYS30 (2)
Hand Of Tool
Hand Of Tool
- L (8)
- N (1)
- R (10)
F Dimension
F Dimension
- 25.3 mm(1)
- 27.0 mm(3)
to
F Dimension
F Dimension
- 0.996 in(1)
- 1.063 in(3)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 50.0 mm(3)
- 120.0 mm(1)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 1.969 in(3)
- 4.724 in(1)
to
Cutting Direction
Cutting Direction
- E (15)
- S (4)
Rake Angle Style
Rake Angle Style
- NEUTRAL (ZERO) (14)
- POSITIVE-ZERO (5)
Boring Bar Material
Boring Bar Material
- S (3)
Front-End
Cutting Width
Cutting Width
- 0.06 in(3)
- 0.079 in(4)
- 0.084 in(4)
- 0.094 in(1)
- 0.095 in(1)
- 0.097 in(1)
- 0.098 in(1)
- 0.104 in(1)
- 0.119 in(5)
- 0.12 in(5)
- 0.122 in(5)
- 0.123 in(5)
- 0.125 in(5)
- 0.13 in(5)
- 0.157 in(4)
- 0.161 in(4)
- 0.162 in(4)
- 0.187 in(4)
- 0.193 in(4)
- 0.197 in(2)
- 0.199 in(2)
- 0.201 in(2)
- 0.202 in(2)
to
Cutting Width
Cutting Width
- 1.5 mm(3)
- 2.0 mm(4)
- 2.125 mm(4)
- 2.375 mm(1)
- 2.401 mm(1)
- 2.475 mm(1)
- 2.5 mm(1)
- 2.625 mm(1)
- 3.0 mm(5)
- 3.051 mm(5)
- 3.1 mm(5)
- 3.125 mm(5)
- 3.176 mm(5)
- 3.301 mm(5)
- 4.0 mm(4)
- 4.101 mm(4)
- 4.125 mm(4)
- 4.75 mm(4)
- 4.9 mm(4)
- 5.0 mm(2)
- 5.051 mm(2)
- 5.101 mm(2)
- 5.125 mm(2)
to
Insert Size
Insert Size
- 1 (3)
- 2 (4)
- 2B (1)
- 3 (5)
- 4 (4)
- 5 (2)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.354 in(1)
- 0.404 in(3)
- 0.531 in(3)
- 0.551 in(11)
- 0.748 in(1)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 9.0 mm(1)
- 10.25 mm(3)
- 13.5 mm(3)
- 14.0 mm(11)
- 19.0 mm(1)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (11)
- B L (11)
- C N (11)
- D P (11)
- H T (16)
- H W (19)
Back-End
System Size
System Size
- KM20 (6)
- KM25 (10)
- KM3225 (3)
Back-End Diameter
Back-End Diameter
- 20.0 mm(6)
- 25.0 mm(10)
- 32.0 mm(3)
to
Back-End Diameter
Back-End Diameter
- 0.787 in(6)
- 0.984 in(10)
- 1.26 in(3)
to
No filters matching ""
