S-Clamping • KM25
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (14)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(14)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(14)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(14)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(14)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(14)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(14)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(14)
- M Stainless Steel (14)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(14)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(14)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(14)
- K Cast Iron (14)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(14)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(14)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(14)
- N Non-Ferrous Materials (14)
- N1Wrought Aluminum (14)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(14)
- N3High-Silicon Aluminum Alloys Si >12.2%(12)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (14)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (14)
- N6Carbon, Graphite Composites, CFRP (14)
- N7MMC's (13)
- S High-Temp Alloys (14)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(14)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(14)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(14)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(14)
- H Hardened Materials (14)
- H1Hardened Materials 44-48 HRC(14)
- H2Hardened Materials 48-55 HRC(14)
- H3Hardened Materials 56-60 HRC(13)
- H4Hardened Materials >60 HRC(12)
- C CFRP Materials (14)
- C1CFRP, CFRP / CFRP (14)
- C2CFRP / Aluminium CFRP / Non-Ferrous (13)
Applications
Applications
- Facing (5)
- Multiple Direction Cutting (12)
- Profiling (11)
- Turning (12)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (14)
- Lightly Interrupted Cut (14)
- Smooth Cut (14)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (1)
- 90.0 (2)
- 93.0 (7)
- 95.0 (2)
- 107.5 (2)
to
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (13)
- 2.0 (10)
- 3.0 (2)
- 4.0 (3)
to
Corner Radius
Corner Radius
- 0.0 in(4)
- 0.001 in(8)
- 0.002 in(12)
- 0.004 in(12)
- 0.008 in(12)
- 0.016 in(13)
- 0.031 in(13)
- 0.047 in(11)
- 0.063 in(2)
- 0.197 in(1)
to
Corner Radius
Corner Radius
- 0.0 mm(4)
- 0.025 mm(8)
- 0.05 mm(12)
- 0.1 mm(12)
- 0.2 mm(12)
- 0.4 mm(13)
- 0.8 mm(13)
- 1.201 mm(11)
- 1.6 mm(2)
- 5.0 mm(1)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- GH1 (4)
- HCK10 (6)
- HK1500 (8)
- HK35 (5)
- HT2 (12)
- HTX (13)
- HWK15 (7)
- K1010P (4)
- K10M (11)
- K10P (4)
- K10U (12)
- K15U (12)
- K20K (8)
- K25M (4)
- K25P (5)
- K313 (14)
- K420 (4)
- K68 (13)
- KB1345 (6)
- KB1610 (8)
- KB1625 (8)
- KB1630 (2)
- KB5610 (10)
- KB5625 (10)
- KB5630 (8)
- KB9610 (10)
- KBH10 (10)
- KBH20 (12)
- KC5010 (14)
- KC5020P (8)
- KC5025 (14)
- KC5410 (13)
- KC720 (13)
- KC730 (14)
- KC732 (13)
- KC8050 (14)
- KC810 (14)
- KC850 (14)
- KC9010 (7)
- KC9025 (13)
- KC910 (14)
- KC9105 (13)
- KC9110 (13)
- KC9120 (9)
- KC9125 (13)
- KC9225 (13)
- KC9240 (14)
- KC9240NEW (14)
- KC9315 (14)
- KC9320 (14)
- KC9325 (9)
- KC935 (13)
- KC950 (11)
- KC990 (8)
- KCD25 (13)
- KCK05 (13)
- KCK05B (12)
- KCK15 (11)
- KCK15B (12)
- KCK20 (14)
- KCK20B (14)
- KCM15 (13)
- KCM15B (8)
- KCM25 (14)
- KCM25B (13)
- KCM25S (6)
- KCM35 (11)
- KCM35B (8)
- KCP05 (13)
- KCP05B (4)
- KCP10 (13)
- KCP10B (13)
- KCP15 (2)
- KCP20S (6)
- KCP25 (14)
- KCP25B (13)
- KCP25C (14)
- KCP30 (14)
- KCP30B (2)
- KCP40B (2)
- KCS10 (14)
- KCS10B (14)
- KCS25S (6)
- KCU10 (13)
- KCU10B (14)
- KCU25 (14)
- KCU25B (14)
- KD050 (4)
- KD081 (4)
- KD100 (2)
- KD1400 (12)
- KD1405 (2)
- KD1425 (12)
- KN10S (8)
- KT125 (4)
- KT175 (11)
- KT315 (13)
- KT325 (13)
- KTP10 (12)
- KTP25S (12)
- KU10 (10)
- KU10T (13)
- KU30T (13)
- PB100 (6)
- PB170 (2)
- PB250 (6)
- PD100 (6)
- PD50 (4)
- SP0G00 (1)
- SPN3W1 (2)
- THM (12)
- THM-X (6)
- TN10P (11)
- TN10U (11)
- TN15M (11)
- TN15U (10)
- TN2000 (8)
- TN20K (11)
- TN20P (11)
- TN30M (11)
- TN4000 (5)
- TN5015 (10)
- TN5020 (11)
- TN5105 (9)
- TN5120 (12)
- TN6010 (8)
- TN6025 (8)
- TN7005 (10)
- TN7010 (12)
- TN7015 (12)
- TN7025 (12)
- TN7035 (12)
- TN7105 (12)
- TN7110 (12)
- TN7115 (12)
- TN7125 (12)
- TN7135 (12)
- TN8025 (9)
- TTI15 (9)
- TTM (2)
- TTM09 (4)
- TTR (10)
- TTS (2)
- TTX (9)
- W00342 (4)
- WBH10C (8)
- WBH10P (8)
- WBH10U (8)
- WBH20P (8)
- WBH25P (8)
- WBH25U (8)
- WBH30P (8)
- WBK45U (8)
- WDN00U (2)
- WDN25U (10)
- WK05CT (9)
- WK15CT (11)
- WK20CT (12)
- WM15CT (11)
- WM25CT (11)
- WP15CT (12)
- WP20TT (4)
- WP25CT (12)
- WP35CT (10)
- WS10PT (8)
- WS25PT (8)
- WU05PT (8)
- WU10HT (10)
- WU10PT (11)
- WU25PT (11)
Hand Of Tool
Hand Of Tool
- L (6)
- N (1)
- R (7)
Wiper Insert
Wiper Insert
- N (14)
- Y (4)
F Dimension
F Dimension
- 0.0 mm(1)
- 16.0 mm(10)
- 22.0 mm(3)
to
F Dimension
F Dimension
- 0.0 in(1)
- 0.63 in(10)
- 0.866 in(3)
to
Cutting Direction
Cutting Direction
- B (3)
- E (3)
- S (8)
Front-End
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (2)
- D-DIAMOND/RHOMBIC 55 (4)
- R-ROUND (1)
- S-SQUARE 90 (1)
- T-TRIANGLE 60 (2)
- V-DIAMOND/RHOMBIC 35 (4)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (10)
- B L (12)
- C N (2)
- D P (12)
- H T (13)
- H W (14)
No filters matching ""