Top Notch™ Threading and Grooving
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (20)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(20)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(20)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(20)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(20)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(20)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(20)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(20)
- M Stainless Steel (20)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(20)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(20)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(20)
- K Cast Iron (20)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(20)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(20)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(20)
- N Non-Ferrous Materials (20)
- N1Wrought Aluminum (20)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(20)
- N3High-Silicon Aluminum Alloys Si >12.2%(20)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (20)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (20)
- N6Carbon, Graphite Composites, CFRP (20)
- N7MMC's (20)
- S High-Temp Alloys (20)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(20)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(20)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(20)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(20)
- H Hardened Materials (20)
- H1Hardened Materials 44-48 HRC(20)
- H2Hardened Materials 48-55 HRC(20)
- H3Hardened Materials 56-60 HRC(20)
- H4Hardened Materials >60 HRC(20)
Applications
Applications
- Grooving (20)
- ID Grooving (20)
- ID Thread Turning (20)
- OD Thread Turning (20)
- Profiling (2)
- Threading (20)
Type of Thread
Type of Thread
- 60 (20)
- ACME (8)
- API (8)
- API RD (8)
- BSW (8)
- BUTTRESS (20)
- M (14)
- NPT (8)
- STUB ACME (8)
- UN (20)
- UNJ (8)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (20)
- Lightly Interrupted Cut (20)
- Smooth Cut (20)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (20)
- 2.0 (20)
to
Over All Length [L]
Over All Length [L]
- 2.757 in(6)
- 3.15 in(2)
- 3.543 in(4)
- 3.938 in(4)
- 4.331 in(4)
to
Over All Length [L]
Over All Length [L]
- 70.0 mm(6)
- 80.0 mm(2)
- 90.0 mm(4)
- 100.0 mm(4)
- 110.0 mm(4)
to
Corner Radius
Corner Radius
- 0.002 in(8)
- 0.003 in(20)
- 0.004 in(20)
- 0.005 in(8)
- 0.006 in(8)
- 0.007 in(14)
- 0.008 in(20)
- 0.01 in(14)
- 0.011 in(8)
- 0.012 in(8)
- 0.014 in(8)
- 0.016 in(8)
- 0.019 in(8)
- 0.02 in(20)
- 0.023 in(8)
- 0.03 in(12)
- 0.031 in(20)
- 0.035 in(8)
- 0.039 in(20)
- 0.047 in(20)
- 0.049 in(20)
- 0.06 in(20)
- 0.062 in(8)
- 0.063 in(20)
- 0.069 in(20)
- 0.078 in(8)
- 0.079 in(8)
- 0.089 in(8)
- 0.095 in(8)
to
Corner Radius
Corner Radius
- 0.05 mm(8)
- 0.076 mm(20)
- 0.1 mm(20)
- 0.125 mm(8)
- 0.151 mm(8)
- 0.176 mm(14)
- 0.2 mm(20)
- 0.225 mm(8)
- 0.25 mm(14)
- 0.275 mm(8)
- 0.301 mm(8)
- 0.325 mm(8)
- 0.351 mm(8)
- 0.4 mm(8)
- 0.45 mm(8)
- 0.476 mm(4)
- 0.5 mm(20)
- 0.576 mm(8)
- 0.75 mm(12)
- 0.775 mm(20)
- 0.9 mm(8)
- 1.0 mm(20)
- 1.201 mm(20)
- 1.25 mm(20)
- 1.5 mm(20)
- 1.576 mm(8)
- 1.6 mm(20)
- 1.75 mm(20)
- 1.975 mm(8)
- 2.0 mm(8)
- 2.25 mm(8)
- 2.401 mm(8)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K2885 (20)
- K313 (20)
- K420 (20)
- K4H (14)
- K68 (20)
- KB1345 (8)
- KB1630 (8)
- KB5625 (8)
- KBH20 (4)
- KC250 (20)
- KC5010 (20)
- KC5025 (20)
- KC5410 (20)
- KC710 (20)
- KC720 (20)
- KC722 (20)
- KC730 (20)
- KC732 (8)
- KC810 (20)
- KC850 (20)
- KC910 (14)
- KC9110 (20)
- KC9120 (8)
- KC9320 (20)
- KC935 (20)
- KC950 (20)
- KCK20 (14)
- KCK20B (20)
- KCP10B (20)
- KCP25B (20)
- KCU10 (20)
- KCU10B (20)
- KCU25 (20)
- KCU25B (20)
- KD050 (4)
- KD081 (8)
- KD100 (8)
- KD120 (8)
- KD1425 (8)
- KT175 (20)
- KT315 (20)
- KU10T (20)
- KU25T (20)
- KU30T (20)
- KY3000 (8)
- THM (20)
- TN10P (14)
- TN6010 (20)
- TN6025 (20)
- TN7110 (20)
- WU10HT (4)
- WU10PT (6)
- WU25PT (4)
Hand Of Tool
Hand Of Tool
- L (10)
- R (10)
F Dimension
F Dimension
- 11.0 mm(6)
- 13.0 mm(2)
- 17.0 mm(8)
- 22.0 mm(4)
to
F Dimension
F Dimension
- 0.433 in(6)
- 0.512 in(2)
- 0.669 in(8)
- 0.866 in(4)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 18.5 mm(2)
- 20.0 mm(4)
- 25.0 mm(2)
- 32.0 mm(4)
- 34.0 mm(4)
- 40.0 mm(4)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.728 in(2)
- 0.787 in(4)
- 0.984 in(2)
- 1.26 in(4)
- 1.339 in(4)
- 1.575 in(4)
to
Maximum Bore Depth
Maximum Bore Depth
- 1.655 in(2)
- 2.169 in(4)
- 2.209 in(2)
- 2.757 in(2)
- 2.955 in(4)
- 2.993 in(2)
- 3.15 in(2)
- 3.781 in(2)
to
Maximum Bore Depth
Maximum Bore Depth
- 42.026 mm(2)
- 55.1 mm(4)
- 56.1 mm(2)
- 70.025 mm(2)
- 75.05 mm(4)
- 76.025 mm(2)
- 80.0 mm(2)
- 96.025 mm(2)
to
Boring Bar Material
Boring Bar Material
- C (2)
- S (18)
Front-End
Cutting Width
Cutting Width
- 0.02 in(12)
- 0.031 in(12)
- 0.035 in(12)
- 0.039 in(20)
- 0.041 in(12)
- 0.047 in(20)
- 0.055 in(12)
- 0.058 in(12)
- 0.06 in(20)
- 0.062 in(20)
- 0.067 in(12)
- 0.069 in(20)
- 0.073 in(8)
- 0.077 in(12)
- 0.078 in(8)
- 0.079 in(20)
- 0.088 in(20)
- 0.089 in(16)
- 0.094 in(4)
- 0.095 in(20)
- 0.097 in(8)
- 0.098 in(20)
- 0.105 in(8)
- 0.108 in(20)
- 0.11 in(8)
- 0.119 in(20)
- 0.122 in(8)
- 0.125 in(20)
- 0.126 in(20)
- 0.128 in(20)
- 0.129 in(12)
- 0.131 in(4)
- 0.138 in(20)
- 0.143 in(8)
- 0.147 in(6)
- 0.15 in(6)
- 0.151 in(6)
- 0.152 in(12)
- 0.156 in(8)
- 0.157 in(8)
- 0.167 in(8)
- 0.169 in(8)
- 0.177 in(8)
- 0.178 in(8)
- 0.185 in(8)
- 0.188 in(8)
- 0.189 in(8)
- 0.192 in(4)
- 0.193 in(4)
- 0.195 in(8)
- 0.196 in(8)
to
Cutting Width
Cutting Width
- 0.5 mm(12)
- 0.775 mm(12)
- 0.8 mm(12)
- 0.9 mm(12)
- 1.0 mm(20)
- 1.05 mm(12)
- 1.201 mm(20)
- 1.401 mm(12)
- 1.475 mm(12)
- 1.5 mm(20)
- 1.576 mm(20)
- 1.701 mm(12)
- 1.75 mm(20)
- 1.826 mm(8)
- 1.951 mm(12)
- 1.975 mm(8)
- 2.0 mm(20)
- 2.2 mm(20)
- 2.225 mm(20)
- 2.25 mm(16)
- 2.375 mm(4)
- 2.401 mm(20)
- 2.475 mm(8)
- 2.5 mm(20)
- 2.676 mm(8)
- 2.75 mm(20)
- 2.801 mm(8)
- 3.0 mm(20)
- 3.1 mm(8)
- 3.176 mm(20)
- 3.2 mm(20)
- 3.25 mm(20)
- 3.276 mm(12)
- 3.325 mm(4)
- 3.5 mm(20)
- 3.6 mm(8)
- 3.725 mm(6)
- 3.801 mm(6)
- 3.825 mm(6)
- 3.85 mm(12)
- 3.95 mm(8)
- 3.975 mm(4)
- 4.0 mm(8)
- 4.25 mm(8)
- 4.3 mm(8)
- 4.5 mm(8)
- 4.525 mm(8)
- 4.7 mm(8)
- 4.775 mm(8)
- 4.801 mm(8)
- 4.875 mm(4)
- 4.9 mm(4)
- 4.95 mm(8)
- 4.976 mm(8)
to
Insert Size
Insert Size
- 2 (12)
- 3 (8)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.138 in(10)
- 0.21 in(8)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 3.5 mm(10)
- 5.325 mm(8)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (8)
- B L (8)
- C N (8)
- D P (8)
- H T (20)
- H W (20)
No filters matching ""