Kendex™ Negative
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (2)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(2)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(2)
- K Cast Iron (4)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(4)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(4)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(4)
- N Non-Ferrous Materials (2)
- N1Wrought Aluminum (2)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(2)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (2)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (2)
- N7MMC's (2)
- S High-Temp Alloys (4)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(4)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(4)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(4)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(2)
- H Hardened Materials (4)
- H1Hardened Materials 44-48 HRC(4)
- H2Hardened Materials 48-55 HRC(4)
- H3Hardened Materials 56-60 HRC(4)
- H4Hardened Materials >60 HRC(4)
- C CFRP Materials (2)
- C2CFRP / Aluminium CFRP / Non-Ferrous (2)
Applications
Applications
Facing (2)
Multiple Direction Cutting (2)
TRN Boring (2)
Turning (2)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (4)
- Lightly Interrupted Cut (4)
- Smooth Cut (4)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (2)
- 95.0 (2)
to
Connection Style
Connection Style
- KM (2)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 2.0 (2)
- 4.0 (2)
- 8.0 (2)
to
Internal Coolant Capability
Internal Coolant Capability
Corner Radius
Corner Radius
- 0.016 in(2)
- 0.031 in(2)
- 0.047 in(2)
- 0.063 in(2)
- 0.25 in(2)
to
Corner Radius
Corner Radius
- 0.4 mm(2)
- 0.8 mm(2)
- 1.201 mm(2)
- 1.6 mm(2)
- 6.351 mm(2)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CW2015 (4)
- CW3020 (4)
- CW5025 (4)
- K060 (2)
- K090 (4)
- K313 (2)
- KB1340 (2)
- KB9640 (2)
- KBK35 (2)
- KBK45 (2)
- KY1310 (4)
- KY1320 (4)
- KY1525 (4)
- KY1540 (4)
- KY1615 (4)
- KY2000 (4)
- KY2100 (4)
- KY3000 (4)
- KY3400 (4)
- KY3500 (4)
- KY4300 (4)
- KY4400 (4)
- KYHK15B (4)
- KYK10 (4)
- KYK25 (4)
- KYK35 (4)
- KYS25 (4)
- KYS30 (4)
- MC2 (2)
- MC3 (2)
- WBK40U (2)
Hand Of Tool
Hand Of Tool
- L (1)
- R (1)
F Dimension
F Dimension
- 35.0 mm(2)
to
F Dimension
F Dimension
- 1.379 in(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 70.0 mm(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 2.757 in(2)
to
Cutting Direction
Cutting Direction
- S (2)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (2)
Maximum Bore Depth
Maximum Bore Depth
- 1.969 in(2)
to
Maximum Bore Depth
Maximum Bore Depth
- 50.0 mm(2)
to
Front-End
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (2)
- R-ROUND (2)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (2)
- C A (4)
- C N (4)
- H W (4)
Back-End
Connection Type
Connection Type
- TAPER SHANK (2)
System Size
System Size
- KM50TS (2)
No filters matching ""
