P-Clamping

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (60)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(60)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(60)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(60)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(60)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(60)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(60)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(60)
    • M Stainless Steel (60)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(60)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(60)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(60)
    • K Cast Iron (60)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(60)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(60)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(60)
    • N Non-Ferrous Materials (60)
      • N1
        Wrought Aluminum (60)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(60)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(27)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (60)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (60)
      • N6
        Carbon, Graphite Composites, CFRP (60)
      • N7
        MMC's (45)
    • S High-Temp Alloys (60)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(60)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(60)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(60)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(60)
    • H Hardened Materials (60)
      • H1
        Hardened Materials 44-48 HRC(60)
      • H2
        Hardened Materials 48-55 HRC(60)
      • H3
        Hardened Materials 56-60 HRC(59)
      • H4
        Hardened Materials >60 HRC(33)
    • C CFRP Materials (60)
      • C1
        CFRP, CFRP / CFRP (60)
      • C2
        CFRP / Aluminium CFRP / Non-Ferrous (45)
    Applications
    Applications
    • FacingFacing (52)
    • Multiple Direction CuttingMultiple Direction Cutting (37)
    • ProfilingProfiling (11)
    • TRN BoringTRN Boring (39)
    • TurningTurning (60)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (60)
    • Lightly Interrupted Cut (60)
    • Smooth Cut (60)
    • Varying Depth of Cut (60)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 45.0 (8)
    • 63.0 (4)
    • 75.0 (16)
    • 90.0 (5)
    • 93.0 (11)
    • 95.0 (12)
    • 107.5 (4)
    Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • KM (23)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 0.0 (2)
    • 1.0 (23)
    • 2.0 (30)
    • 3.0 (9)
    • 4.0 (49)
    • 6.0 (11)
    • 8.0 (32)
    Cutting Edges Per Insert MintoCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Corner configuration
    Corner Radius
    Corner Radius
    • 0.004 in(24)
    • 0.008 in(18)
    • 0.014 in(10)
    • 0.016 in(42)
    • 0.024 in(2)
    • 0.031 in(60)
    • -0.039 in(2)
    • 0.047 in(60)
    • 0.062 in(3)
    • 0.063 in(51)
    • 0.094 in(6)
    • 0.095 in(36)
    • 0.125 in(2)
    • 0.126 in(16)
    • 0.157 in(7)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.1 mm(24)
    • 0.2 mm(18)
    • 0.351 mm(10)
    • 0.4 mm(42)
    • 0.601 mm(2)
    • 0.8 mm(60)
    • -1.0 mm(2)
    • 1.201 mm(60)
    • 1.576 mm(3)
    • 1.6 mm(51)
    • 2.375 mm(6)
    • 2.401 mm(36)
    • 3.176 mm(2)
    • 3.2 mm(16)
    • 4.0 mm(7)
    Corner Radius MintoCorner Radius Max
    Application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • 13E (35)
    • 241 (3)
    • CL4 (34)
    • CM2 (38)
    • CM3 (36)
    • CM4 (19)
    • CPX (42)
    • CW2 (17)
    • CW2015 (35)
    • CW5025 (41)
    • GX (22)
    • HK1500 (33)
    • HT2 (20)
    • HTX (7)
    • K060 (13)
    • K090 (49)
    • K1 (16)
    • K10M (46)
    • K10P (40)
    • K10U (27)
    • K15U (27)
    • K20K (52)
    • K21 (26)
    • K25M (42)
    • K25P (44)
    • K313 (60)
    • K35P (37)
    • K420 (39)
    • K45 (15)
    • K68 (49)
    • KB1340 (16)
    • KB1345 (7)
    • KB1610 (15)
    • KB1625 (13)
    • KB1630 (7)
    • KB5610 (5)
    • KB5625 (13)
    • KB5630 (3)
    • KB9610 (25)
    • KB9640 (18)
    • KBH10 (25)
    • KBH10B (17)
    • KBH20 (25)
    • KBH20B (17)
    • KBK35 (3)
    • KC210 (32)
    • KC250 (29)
    • KC5010 (60)
    • KC5025 (60)
    • KC5410 (45)
    • KC5510 (60)
    • KC5525 (27)
    • KC710 (3)
    • KC720 (30)
    • KC722 (3)
    • KC730 (44)
    • KC7310 (59)
    • KC732 (23)
    • KC8050 (60)
    • KC810 (58)
    • KC850 (58)
    • KC9010 (59)
    • KC9025 (60)
    • KC910 (51)
    • KC9105 (52)
    • KC9110 (60)
    • KC9120 (58)
    • KC9125 (60)
    • KC9125RR (6)
    • KC9140 (60)
    • KC9145 (47)
    • KC9210 (10)
    • KC9215 (59)
    • KC9225 (60)
    • KC9240 (60)
    • KC9240NEW (60)
    • KC9245 (60)
    • KC9315 (60)
    • KC9320 (59)
    • KC9325 (60)
    • KC935 (60)
    • KC950 (51)
    • KC990 (60)
    • KCK05 (59)
    • KCK05B (51)
    • KCK15 (60)
    • KCK15B (59)
    • KCK20 (60)
    • KCK20B (60)
    • KCM15 (60)
    • KCM15B (53)
    • KCM25 (60)
    • KCM25B (60)
    • KCM35 (53)
    • KCM35B (50)
    • KCP05 (42)
    • KCP05B (36)
    • KCP10 (60)
    • KCP10B (60)
    • KCP25 (60)
    • KCP25B (60)
    • KCP25C (60)
    • KCP30 (60)
    • KCP30B (53)
    • KCP40 (51)
    • KCP40B (53)
    • KCPK05 (57)
    • KCS10 (3)
    • KCS10B (56)
    • KCU10 (60)
    • KCU10B (60)
    • KCU25 (60)
    • KCU25B (60)
    • KD050 (15)
    • KD081 (15)
    • KD100 (3)
    • KD120 (15)
    • KD1400 (9)
    • KD1405 (3)
    • KD1425 (9)
    • KM1 (22)
    • KMF (3)
    • KS15 (3)
    • KT1120 (2)
    • KT125 (25)
    • KT150 (13)
    • KT175 (25)
    • KT315 (36)
    • KT325 (24)
    • KT5020 (4)
    • KTP10 (34)
    • KTP25S (19)
    • KU10T (36)
    • KU30T (60)
    • KY1310 (27)
    • KY1320 (43)
    • KY1540 (15)
    • KY1615 (36)
    • KY2000 (23)
    • KY2100 (9)
    • KY3000 (49)
    • KY3400 (40)
    • KY3500 (50)
    • KY4000 (15)
    • KY4300 (13)
    • KY4400 (37)
    • KYHK15B (37)
    • KYK10 (15)
    • KYK25 (33)
    • KYK35 (50)
    • KYS25 (13)
    • KYS30 (15)
    • NL200 (13)
    • NL250 (58)
    • NL300 (49)
    • NL400 (15)
    • NL920 (39)
    • P25 (11)
    • PB100 (3)
    • PB170 (3)
    • PB250 (3)
    • PB300 (3)
    • PS5 (20)
    • SP0819 (44)
    • SP0A00 (6)
    • SP3019 (34)
    • SP4019 (25)
    • SP61EJ (6)
    • SPADAP (11)
    • SPN4W2 (7)
    • SPSREJ (6)
    • THM (26)
    • THM-X (19)
    • THMF-X (13)
    • TN10P (47)
    • TN10U (27)
    • TN15M (46)
    • TN15U (27)
    • TN2000 (40)
    • TN20K (53)
    • TN20P (60)
    • TN30M (53)
    • TN30P (51)
    • TN4000 (40)
    • TN5015 (57)
    • TN5020 (51)
    • TN5105 (34)
    • TN5120 (51)
    • TN6010 (13)
    • TN6025 (25)
    • TN7005 (22)
    • TN7010 (57)
    • TN7015 (58)
    • TN7025 (58)
    • TN7035 (51)
    • TN7105 (28)
    • TN7110 (44)
    • TN7115 (51)
    • TN7125 (58)
    • TN7135 (51)
    • TN8025 (53)
    • TTI15 (20)
    • TTM (2)
    • TTM09 (19)
    • TTR (11)
    • TTR-X (7)
    • TTS (34)
    • TTX (19)
    • W00342 (8)
    • WBH10C (21)
    • WBH10P (3)
    • WBH10U (15)
    • WBH20P (25)
    • WBH25P (13)
    • WBH25U (23)
    • WBH30P (3)
    • WBK40U (16)
    • WBK45U (17)
    • WDN00U (3)
    • WDN25U (9)
    • WK05CT (59)
    • WK15CT (33)
    • WK20CT (60)
    • WM15CT (60)
    • WM25CT (60)
    • WM35CT (60)
    • WP05CT (5)
    • WP15CT (60)
    • WP20TT (7)
    • WP25CT (60)
    • WP35CT (60)
    • WS10PT (53)
    • WS25PT (60)
    • WU10HT (53)
    • WU10PT (34)
    • WU25PT (34)
    • X00511 (3)
    • X00580 (3)
    • X00581 (3)
    • X00582 (3)
    • X00583 (3)
    • X00584 (3)
    • X00585 (3)
    • X00586 (3)
    • X00591 (3)
    • X00592 (3)
    • X00593 (3)
    • X00594 (3)
    • X00596 (3)
    • X00597 (3)
    • X00599 (3)
    Hand Of Tool
    Hand Of Tool
    • L (9)
    • N (3)
    • R (11)
    Wiper Insert
    Wiper Insert
    • N (60)
    • Y (21)
    F Dimension
    F Dimension
    • 0.0 mm(7)
    • 27.0 mm(5)
    • 43.0 mm(9)
    • 59.0 mm(2)
    F Dimension MintoF Dimension Max
    F Dimension
    F Dimension
    • 0.0 in(7)
    • 1.063 in(5)
    • 1.693 in(9)
    • 2.323 in(2)
    F Dimension MintoF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • -1.0 mm(2)
    • 80.0 mm(32)
    • 90.0 mm(2)
    • 100.0 mm(3)
    • 118.0 mm(2)
    Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • -0.039 in(2)
    • 3.15 in(32)
    • 3.543 in(2)
    • 3.938 in(3)
    • 4.646 in(2)
    Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • -0.039 in(2)
    Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • -1.0 mm(2)
    Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • S (23)
    Rake Angle Style
    Rake Angle Style
    • DOUBLE NEGATIVE (20)
    • NEGATIVE-ZERO (3)
    Maximum Bore Depth
    Maximum Bore Depth
    • 2.362 in(39)
    Maximum Bore Depth MintoMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 60.0 mm(39)
    Maximum Bore Depth MintoMaximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • S (2)
    Front-End
    Insert Shape
    Insert Shape
    • C-DIAMOND/RHOMBIC 80 (13)
    • D-DIAMOND/RHOMBIC 55 (17)
    • S-SQUARE 90 (19)
    • T-TRIANGLE 60 (7)
    • W-TRIGON 80 (4)
    Insert Geometry
    Cutting Tool Material
    Cutting Tool Material
    • B H (34)
    • B L (27)
    • C A (51)
    • C N (53)
    • D P (19)
    • H T (36)
    • H W (60)
    Back-End
    Connection Type
    Connection Type
    • TAPER SHANK (23)
    System Size
    System Size
    • KM63TS (23)
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Catalog NumberGrade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?