successfully added to cart
View Cart

Notifications

Mark all as read

PSC 50 Internal Cutting Units

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (54)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (54)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (54)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (54)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (54)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (54)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (54)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (54)
  • M Stainless Steel (54)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (54)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (54)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (54)
  • K Cast Iron (54)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (54)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (54)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (54)
  • N Non-Ferrous Materials (52)
    • N1
      Wrought Aluminum
      (52)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (52)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (38)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (52)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (52)
    • N6
      Carbon, Graphite Composites, CFRP
      (46)
    • N7
      MMC's
      (52)
  • S High-Temp Alloys (54)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (54)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (54)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (54)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (54)
  • H Hardened Materials (46)
    • H1
      Hardened Materials 44-48 HRC
      (46)
    • H2
      Hardened Materials 48-55 HRC
      (40)
    • H3
      Hardened Materials 56-60 HRC
      (38)
    • H4
      Hardened Materials >60 HRC
      (38)
Applications
Applications
  • Facing Facing (41)
  • ID Facing ID Facing (41)
  • ID Grooving ID Grooving (7)
  • ID Thread Turning ID Thread Turning (6)
  • Multiple Direction Cutting Multiple Direction Cutting (41)
  • Plunge Turning Plunge Turning (28)
  • TRN Boring TRN Boring (41)
  • Turning Turning (41)
Type of Thread
Type of Thread
  • 55 (6)
  • 60 (13)
  • ACME (11)
  • API (6)
  • API BUTTRESS (1)
  • API RD (9)
  • BSPT (5)
  • BSW (10)
  • BUTTRESS (7)
  • M (12)
  • NPT (9)
  • NPTF (5)
  • RD DIN 405 (6)
  • STUB ACME (10)
  • TR DIN 103 (6)
  • UN (12)
  • UNJ (9)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (48)
  • Interrupted (21)
  • Lightly Interrupted Cut (48)
  • Smooth Cut (48)
  • Varying Depth of Cut (48)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 75.0 (1)
  • 90.0 (13)
  • 93.0 (13)
  • 95.0 (21)
  • 107.5 (6)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (37)
  • 2.0 (44)
  • 3.0 (7)
  • 4.0 (32)
  • 6.0 (1)
  • 8.0 (15)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Corner configuration
Corner Radius
Corner Radius
  • 0.001 in (4)
  • 0.002 in (23)
  • 0.003 in (12)
  • 0.004 in (45)
  • 0.005 in (4)
  • 0.006 in (10)
  • 0.007 in (7)
  • 0.008 in (43)
  • 0.01 in (7)
  • 0.011 in (4)
  • 0.012 in (5)
  • 0.014 in (10)
  • 0.016 in (45)
  • 0.017 in (5)
  • 0.019 in (5)
  • 0.02 in (6)
  • 0.023 in (5)
  • 0.024 in (1)
  • 0.028 in (3)
  • 0.03 in (2)
  • 0.031 in (47)
  • 0.035 in (5)
  • 0.037 in (4)
  • 0.039 in (6)
  • 0.047 in (46)
  • 0.049 in (6)
  • 0.055 in (1)
  • 0.06 in (6)
  • 0.062 in (14)
  • 0.063 in (32)
  • 0.069 in (6)
  • 0.078 in (4)
  • 0.079 in (5)
  • 0.089 in (5)
  • 0.094 in (2)
  • 0.095 in (8)
  • 0.098 in (1)
  • 0.125 in (1)
  • 0.126 in (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.025 mm (4)
  • 0.05 mm (23)
  • 0.076 mm (12)
  • 0.1 mm (45)
  • 0.125 mm (4)
  • 0.151 mm (10)
  • 0.176 mm (7)
  • 0.2 mm (43)
  • 0.225 mm (4)
  • 0.25 mm (7)
  • 0.275 mm (4)
  • 0.301 mm (5)
  • 0.325 mm (5)
  • 0.351 mm (10)
  • 0.4 mm (45)
  • 0.426 mm (5)
  • 0.45 mm (5)
  • 0.476 mm (1)
  • 0.5 mm (6)
  • 0.576 mm (5)
  • 0.601 mm (1)
  • 0.701 mm (3)
  • 0.75 mm (2)
  • 0.775 mm (6)
  • 0.8 mm (41)
  • 0.9 mm (5)
  • 0.925 mm (4)
  • 1.0 mm (6)
  • 1.201 mm (46)
  • 1.25 mm (6)
  • 1.401 mm (1)
  • 1.5 mm (6)
  • 1.576 mm (14)
  • 1.6 mm (32)
  • 1.75 mm (6)
  • 1.975 mm (4)
  • 2.0 mm (5)
  • 2.25 mm (5)
  • 2.375 mm (2)
  • 2.401 mm (8)
  • 2.5 mm (1)
  • 3.176 mm (1)
  • 3.2 mm (2)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • HK1500 (30)
  • HT2 (35)
  • K10U (31)
  • K15U (31)
  • K25M (33)
  • K313 (46)
  • K68 (42)
  • KB9610 (31)
  • KBH10 (31)
  • KBH20 (32)
  • KC5010 (51)
  • KC5025 (52)
  • KC5410 (40)
  • KC720 (41)
  • KC730 (49)
  • KC732 (32)
  • KC8050 (41)
  • KC810 (46)
  • KC850 (48)
  • KC9010 (35)
  • KC9025 (41)
  • KC910 (37)
  • KC9105 (39)
  • KC9110 (48)
  • KC9120 (38)
  • KC9125 (41)
  • KC9225 (41)
  • KC9240 (41)
  • KC9240NEW (41)
  • KC9315 (41)
  • KC9320 (46)
  • KC9325 (32)
  • KC935 (48)
  • KC950 (40)
  • KC990 (35)
  • KCK05 (41)
  • KCK05B (38)
  • KCK15 (38)
  • KCK15B (41)
  • KCK20 (44)
  • KCK20B (46)
  • KCM15 (41)
  • KCM15B (41)
  • KCM25 (41)
  • KCM25B (39)
  • KCM35 (33)
  • KCP05 (39)
  • KCP05B (35)
  • KCP10 (41)
  • KCP10B (48)
  • KCP25 (41)
  • KCP25B (48)
  • KCP30 (41)
  • KCS10B (39)
  • KCU10 (48)
  • KCU25 (46)
  • KT175 (36)
  • KT315 (46)
  • KT325 (35)
  • KU10T (44)
  • KU30T (46)
  • THM (36)
  • TN10P (45)
  • TN10U (31)
  • TN15M (35)
  • TN15U (31)
  • TN2000 (30)
  • TN20K (33)
  • TN20P (41)
  • TN30M (41)
  • TN5015 (32)
  • TN5020 (39)
  • TN5105 (30)
  • TN5120 (39)
  • TN6025 (37)
  • TN7005 (37)
  • TN7010 (41)
  • TN7015 (41)
  • TN7025 (41)
  • TN7035 (33)
  • TN7105 (36)
  • TN7110 (46)
  • TN7115 (39)
  • TN7125 (39)
  • TN7135 (33)
  • TN8025 (33)
  • TTI15 (34)
  • WBH10C (30)
  • WK05CT (33)
  • WK20CT (39)
  • WM15CT (39)
  • WM25CT (39)
  • WP15CT (39)
  • WP25CT (39)
  • WP35CT (39)
  • WS10PT (32)
  • WS25PT (32)
  • WU10HT (40)
  • WU10PT (37)
  • WU25PT (40)
Hand Of Tool
Hand Of Tool
  • L (26)
  • R (28)
Wiper Insert
Wiper Insert
  • N (54)
  • Y (30)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 20.0 mm (6)
  • 24.0 mm (1)
  • 25.0 mm (5)
  • 32.0 mm (14)
  • 33.0 mm (3)
  • 33.5 mm (1)
  • 38.5 mm (2)
  • 40.0 mm (6)
  • 48.5 mm (1)
  • 50.0 mm (7)
  • 52.5 mm (1)
  • 63.0 mm (7)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.787 in (6)
  • 0.946 in (1)
  • 0.984 in (5)
  • 1.26 in (14)
  • 1.299 in (3)
  • 1.319 in (1)
  • 1.516 in (2)
  • 1.575 in (6)
  • 1.909 in (1)
  • 1.969 in (7)
  • 2.067 in (1)
  • 2.48 in (7)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (7)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (7)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (21)
  • E (20)
  • S (13)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (33)
  • NEGATIVE-ZERO (14)
Maximum Bore Depth
Maximum Bore Depth
  • 1.417 in (3)
  • 1.811 in (3)
  • 1.85 in (2)
  • 2.008 in (1)
  • 2.205 in (4)
  • 2.52 in (3)
  • 2.598 in (5)
  • 2.638 in (10)
  • 3.15 in (1)
  • 3.465 in (6)
  • 3.48 in (1)
  • 3.938 in (2)
  • 4.449 in (2)
  • 4.646 in (2)
  • 4.686 in (4)
  • 5.906 in (5)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 36.0 mm (3)
  • 46.0 mm (3)
  • 47.0 mm (2)
  • 51.0 mm (1)
  • 56.0 mm (4)
  • 64.0 mm (3)
  • 66.0 mm (5)
  • 67.0 mm (10)
  • 80.0 mm (1)
  • 88.0 mm (6)
  • 88.4 mm (1)
  • 100.0 mm (2)
  • 113.0 mm (2)
  • 118.0 mm (2)
  • 119.0 mm (4)
  • 150.0 mm (5)
Maximum Bore Depth Min to Maximum Bore Depth Max
Front-End
Clamp Style
Clamp Style
  • D (7)
  • N (7)
  • P (20)
  • S (20)
Cutting Width
Cutting Width
  • 0.02 in (2)
  • 0.031 in (2)
  • 0.035 in (2)
  • 0.039 in (6)
  • 0.041 in (2)
  • 0.047 in (6)
  • 0.055 in (2)
  • 0.058 in (2)
  • 0.06 in (6)
  • 0.061 in (2)
  • 0.062 in (6)
  • 0.067 in (2)
  • 0.069 in (6)
  • 0.073 in (4)
  • 0.077 in (2)
  • 0.078 in (4)
  • 0.079 in (6)
  • 0.088 in (6)
  • 0.089 in (6)
  • 0.095 in (6)
  • 0.097 in (4)
  • 0.098 in (6)
  • 0.105 in (4)
  • 0.108 in (6)
  • 0.11 in (4)
  • 0.119 in (7)
  • 0.122 in (4)
  • 0.125 in (7)
  • 0.126 in (7)
  • 0.128 in (6)
  • 0.129 in (2)
  • 0.131 in (1)
  • 0.138 in (7)
  • 0.143 in (4)
  • 0.147 in (2)
  • 0.15 in (2)
  • 0.152 in (2)
  • 0.156 in (4)
  • 0.157 in (5)
  • 0.167 in (5)
  • 0.169 in (4)
  • 0.177 in (5)
  • 0.178 in (4)
  • 0.181 in (1)
  • 0.185 in (5)
  • 0.188 in (5)
  • 0.189 in (5)
  • 0.192 in (1)
  • 0.193 in (1)
  • 0.195 in (4)
  • 0.197 in (1)
  • 0.202 in (1)
  • 0.213 in (1)
  • 0.217 in (1)
  • 0.219 in (1)
  • 0.237 in (1)
  • 0.25 in (1)
  • 0.255 in (1)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 0.5 mm (2)
  • 0.775 mm (2)
  • 0.8 mm (2)
  • 0.9 mm (2)
  • 1.0 mm (6)
  • 1.05 mm (2)
  • 1.201 mm (6)
  • 1.401 mm (2)
  • 1.475 mm (2)
  • 1.5 mm (6)
  • 1.55 mm (2)
  • 1.576 mm (6)
  • 1.701 mm (2)
  • 1.75 mm (6)
  • 1.826 mm (4)
  • 1.951 mm (2)
  • 1.975 mm (4)
  • 2.0 mm (6)
  • 2.2 mm (6)
  • 2.225 mm (6)
  • 2.25 mm (6)
  • 2.401 mm (6)
  • 2.475 mm (4)
  • 2.5 mm (6)
  • 2.676 mm (4)
  • 2.75 mm (6)
  • 2.801 mm (4)
  • 3.0 mm (7)
  • 3.1 mm (4)
  • 3.176 mm (7)
  • 3.2 mm (7)
  • 3.25 mm (6)
  • 3.276 mm (2)
  • 3.325 mm (1)
  • 3.5 mm (7)
  • 3.6 mm (4)
  • 3.725 mm (2)
  • 3.801 mm (2)
  • 3.85 mm (2)
  • 3.95 mm (4)
  • 3.975 mm (1)
  • 4.0 mm (5)
  • 4.25 mm (5)
  • 4.3 mm (4)
  • 4.5 mm (5)
  • 4.525 mm (4)
  • 4.601 mm (1)
  • 4.7 mm (5)
  • 4.775 mm (5)
  • 4.801 mm (5)
  • 4.875 mm (1)
  • 4.9 mm (1)
  • 4.95 mm (4)
  • 5.0 mm (1)
  • 5.125 mm (1)
  • 5.4 mm (1)
  • 5.5 mm (1)
  • 5.575 mm (1)
  • 6.0 mm (1)
  • 6.351 mm (1)
  • 6.476 mm (1)
Cutting Width Min to Cutting Width Max
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (20)
  • D-DIAMOND/RHOMBIC 55 (13)
  • LT-TRIANGLE LAY DOWN THREAD 60 (6)
  • S-SQUARE 90 (1)
  • TN-TOP NOTCH (7)
  • V-DIAMOND/RHOMBIC 35 (6)
  • W-TRIGON 80 (1)
Insert Size
Insert Size
  • 2 (2)
  • 3 (4)
  • 4 (1)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.138 in (2)
  • 0.21 in (4)
  • 0.294 in (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 3.5 mm (2)
  • 5.325 mm (4)
  • 7.476 mm (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • B H (42)
  • B L (35)
  • C A (19)
  • C N (30)
  • D P (34)
  • H T (46)
  • H W (54)
Back-End
System Size
System Size
  • PSC50 (26)
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

PSC50

Internal Cutting Units • D-Clamping
(2 Products)
  • Shank - PSCShank - PSC
  • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
  • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
  • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [L1] Tool Length [L1] Tool Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
6330408 PSC50S25GDCLNL12 PSC50S25GDCLNL12 25.0000 .9843 90.0000 3.543 66.0000 2.598 17.0000 .6693 32.0000 1.259 CN..120408/CN..432 0.80
    List price:
    $503.86 /each.
    Your price::
    Qty
    6330410 PSC50S25GDCLNR12 PSC50S25GDCLNR12 25.0000 .9843 90.0000 3.543 66.0000 2.598 17.0000 .6693 32.0000 1.259 CN..120408/CN..432 0.80
      List price:
      $503.86 /each.
      Your price::
      Qty
      List price:
      Discount: %
      Your price::
      Replacement This item is no longer available
      Replacement Product Please contact customer service for assistance
      Qty

      Sold in pkg. of

      ORIGINAL PRODUCT

      PSC50

      Internal Cutting Units • D-Clamping
      (4 Products)
      • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
      • Shank - PSCShank - PSC
      • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
      • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
      View Products
      SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [L1] Tool Length [L1] Tool Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
      6330421 PSC50S25GDDUNL11 PSC50S25GDDUNL11 25.0000 .9843 90.0000 3.543 66.0000 2.598 17.0000 .6693 32.0000 1.259 DN..110408/DN..332 0.95
        List price:
        $503.86 /each.
        Your price::
        Qty
        6330423 PSC50S25GDDUNR11 PSC50S25GDDUNR11 25.0000 .9843 90.0000 3.543 66.0000 2.598 17.0000 .6693 32.0000 1.259 DN..110408/DN..332 0.95
          List price:
          $503.86 /each.
          Your price::
          Qty
          6330422 PSC50S40LDDUNL15 PSC50S40LDDUNL15 40.0000 1.574 140.0000 5.511 118.0000 4.645 27.0000 1.063 50.0000 1.968 DN..150608/DN..442 1.64
            List price:
            $503.86 /each.
            Your price::
            Qty
            6330424 PSC50S40LDDUNR15 PSC50S40LDDUNR15 40.0000 1.574 140.0000 5.511 118.0000 4.645 27.0000 1.063 50.0000 1.968 DN..150608/DN..442 1.64
              List price:
              $503.86 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is no longer available
              Replacement Product Please contact customer service for assistance
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              PSC50

              Internal Cutting Units • Threading and Grooving
              (7 Products)
              • Shank - PSCShank - PSC
              • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
              • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
              • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [L1] Tool Length [L1] Tool Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
              6338414 PSC50S16FNEL2 PSC50S16FNEL2 16.0000 .6299 80.0000 3.149 51.0000 2.007 11.0000 .4331 20.0000 .7874 NG2R 0.53
                List price:
                $561.70 /each.
                Your price::
                Qty
                6338412 PSC50S20HNEL2 PSC50S20HNEL2 20.0000 .7874 100.0000 3.937 64.0000 2.519 13.0000 .5118 24.0000 .9449 NG2R 0.66
                  List price:
                  $561.70 /each.
                  Your price::
                  Qty
                  6338406 PSC50S25JNER3 PSC50S25JNER3 25.0000 .9843 110.0000 4.330 88.4000 3.480 17.0000 .6693 33.5000 1.318 NG3L 1.18
                    List price:
                    $561.70 /each.
                    Your price::
                    Qty
                    6338404 PSC50S32GNEL3 PSC50S32GNEL3 32.0000 1.259 90.0000 3.543 64.0000 2.519 22.0000 .8661 38.5000 1.515 NG3R 1.18
                      List price:
                      $561.70 /each.
                      Your price::
                      Qty
                      6338402 PSC50S32GNER3 PSC50S32GNER3 32.0000 1.259 90.0000 3.543 64.0000 2.519 22.0000 .8661 38.5000 1.515 NG3L 0.79
                        List price:
                        $561.70 /each.
                        Your price::
                        Qty
                        6338416 PSC50S40LNEL4 PSC50S40LNEL4 40.0000 1.574 140.0000 5.511 113.0000 4.448 27.0000 1.063 48.5000 1.909 NG4R 1.48