R Style Inserts
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (4)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(4)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(4)
- K Cast Iron (21)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(21)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(15)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1)
- N Non-Ferrous Materials (3)
- N1Wrought Aluminum (1)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (3)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1)
- N7MMC's (1)
- S High-Temp Alloys (47)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(35)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(47)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(35)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(3)
- H Hardened Materials (18)
- H1Hardened Materials 44-48 HRC(18)
- H2Hardened Materials 48-55 HRC(12)
- H3Hardened Materials 56-60 HRC(12)
- C CFRP Materials (1)
- C2CFRP / Aluminium CFRP / Non-Ferrous (1)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (14)
- Lightly Interrupted Cut (18)
- Smooth Cut (18)
Corner Radius
Corner Radius
- 0.125 in(1)
- 0.188 in(10)
- 0.25 in(47)
- 0.375 in(8)
- 0.5 in(6)
to
Corner Radius
Corner Radius
- 3.176 mm(1)
- 4.775 mm(10)
- 6.351 mm(47)
- 9.525 mm(8)
- 12.701 mm(6)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K313 (1)
- K68 (2)
- KB1340 (3)
- KB9640 (6)
- KBK45 (3)
- KY1540 (6)
- KY1615 (8)
- KY3500 (2)
- KY4300 (9)
- KY4400 (2)
- KYHK15B (12)
- KYK10 (1)
- KYS25 (3)
- KYS30 (12)
- KYSP30 (2)
Insert Geometry
Insert IC Size
Insert IC Size
- 6.351 mm(1)
- 9.525 mm(10)
- 12.701 mm(47)
- 19.05 mm(8)
- 25.401 mm(6)
to
Insert IC Size
Insert IC Size
- 0.25 in(1)
- 0.375 in(10)
- 0.5 in(47)
- 0.75 in(8)
- 1.0 in(6)
to
Chip Breaker CBMD
Chip Breaker CBMD
- E (1)
- GN (4)
Cutting Tool Material
Cutting Tool Material
- B H (9)
- C A (18)
- C N (39)
- H W (6)
Tolerance Class
Tolerance Class
- G (63)
- M (9)
No filters matching ""
