TNMG-P

Grades

• 
  K313

  Composition: A hard, low binder content, unalloyed WC/Co fine-grain grade.
  Application: Exceptional edge wear resistance combined with very high strength for machining titanium, cast irons, austenitic stainless steels, non-ferrous metals, non-metals, and most high-temp alloys. Superior thermal deformation and depth-of-cut notch resistance. The grain structure is well controlled for minimal pits and flaws, which contributes to long, reliable service.

  S High-Temp Alloys

  N Non-Ferrous
• 
  KC5010

  Composition: An advanced PVD AlTiN coating over a very deformation-resistant unalloyed carbide substrate. The new and improved coating enables speeds to be increased by 50–100%.
  Application: The KC5010 grade is ideal for finishing to general machining of most workpiece materials at higher speeds. Excellent for machining most steels, stainless steels, cast irons, non-ferrous materials, and super alloys under stable conditions. It also performs well machining hardened and short chipping materials.

  P Steel

  S High-Temp Alloys

  M Stainless Steel
• 
  KC5410

  • TiB2-PVD coating over a very deformation-resistant unalloyed substrate.
  
  
  • Designed for roughing, semifinishing, and finishing of free machining (hypoeutectic <12,2% Si) aluminum, aluminum alloys, and magnesium alloys.
  
  
  • High hardness and extremely smooth surface, resulting in reduced surface friction, speedy chip flow, and outstanding wear resistance.
  
  
  • Prevents built-up edge because of a very low affinity for aluminum.

  N Non-Ferrous
• KC730

  KC730

  P Steel

  S High-Temp Alloys

  M Stainless Steel
• KC850

  composition: A CVD tri-phase coating on an extra-strong, cobalt-enriched
  alloyed substrate.
  application: Designed for heavy cutting of low-, medium-, and high-carbon
  steels, medium hardness alloy and tool steels, stainless steels, and some
  high-temperature alloys. Excellent thermal and mechanical shock resistance
  makes grade KC850 ideally suited for difficult drilling applications.
  Used in inserts for Kendex/Metcut drill bodies.
  

  P Steel

  M Stainless Steel
• KC9010
• KC9025
• KC910
• 
  KC9110

  Composition: Specially engineered, cobalt-enriched carbide grade with thick K-MTCVD-TiCN coating layer, an Al2O3 layer of controlled grain size, and outer layers of TiCN and TiN for maximum abrasion and wear resistance for high-speed machining.
  Application: An excellent finishing to medium machining grade for a variety of workpiece materials including most steels, ferritic and martensitic stainless steels, and cast irons. A balanced combination of deformation resistance and edge toughness. The smooth coating resists built-up edge and microchipping. For rougher cutting, use the KC9125 grade.

• KC9140

  composition. A newly engineered, tough carbide grade with an advance multi-layered TiN-MT-TiCN-Al203-TiN coating.
  Application. For heavy roughing applications of alloy steels where insert edge strength is critical. A specially designed coating ensures excellent interlayer adhesion and long tool length.
  

• KC9225

  MT-CVD-TiN-TiCN-Al2O3-TiN gradient carbide
  For continuous to slightly interrupted cuts
  For universal use in boring on stainless steels
  Reduced edge build up due to micro-polished surface
  

• KC9240

  Multi-layered Tin-MT-TiCN-Al2O3-TiN CVD coating over a tough, non-enriched carbide substrate
  Designed for tough boring applications at moderate speeds and feeds
  Combination of toughness, built-up edge resistance, and wear-resistance in stainless steel applications
  Excellent thermal/mechanical shock resistance makes KC9240 inserts ideally suited for even the most challenging stainless steel applications
  

• KC9240NEW

  composition: A multi layered CVD coating comprised of  TiN-MT-TiCN-Al2O3-TiN coating over  a tough, non-enriched carbide substrate
  application: This CVD coated grade is designed for tough applications at moderate speeds and feeds. KC9240 inserts offer an extraordinary combination of toughness, built-up edge resistance, and wear resistance in stainless steel applicaions. Excellent thermal/mechanical shock resistance makes KC9340 inserts ideally suited for even the most challenging stainless steel applications
  

• KC935

  KC935

• KC950

  KC950

• KC990
• 
  KCU10

  Composition: An advanced multilayer PVD coating over a very deformation-resistant unalloyed carbide substrate. The new and improved coating improves edge stability with wide range speed and feed capabilities.
  
  Application: The KCU10™ grade is ideal for finishing to general machining of most workpiece materials at a wide range of speed and feed capabilities. Excellent for machining most steels, stainless steels, cast irons, non-ferrous materials, and super alloys with improved edge toughness and higher cutting speed/feed capability.

  P Steel

  S High-Temp Alloys

  M Stainless Steel
• KT175

  KT175