No Items in Cart
Sign In
Loading Profile
English
COVID-19: How Kennametal is responding
Screw-On Inserts
Screw-On Inserts
Screw-On Inserts
Screw-On Inserts

ISO Carbide Inserts

Screw-On Inserts

Metric
Inch
SAP Material Number 1162243
ISO Catalog Number RCGT1204M0HP
ANSI Catalog Number RCGT1204M0HP
Grade K313
[D] Insert IC Size 12.0000
[D] Insert IC Size .4724
[S] Insert Thickness 4.7620
[S] Insert Thickness .1875
[D1] Insert Hole Size 4.4000
[D1] Insert Hole Size .1732
See all Product Variants

Workpiece Material

N
S

Grades

  • K313

    Composition: A hard, low binder content, unalloyed WC/Co fine-grain grade.
    Application: Exceptional edge wear resistance combined with very high strength for machining titanium, cast irons, austenitic stainless steels, non-ferrous metals, non-metals, and most high-temp alloys. Superior thermal deformation and depth-of-cut notch resistance. The grain structure is well controlled for minimal pits and flaws, which contributes to long, reliable service.

    S
    N
  • K68

    Composition: A hard, low binder content, alloyed grade WC/Co fine-grain grade.
    Application: The K68 grade has excellent abrasion resistance for machining cast irons, austenitic stainless steels, non-ferrous metals, non-metals, and as an alternative to the K313 grade on most high-temperature alloys. Use as a general-purpose grade for non-ferrous materials.

    S
    N
  • KC5010

    Composition: An advanced PVD AlTiN coating over a very deformation-resistant unalloyed carbide substrate. The new and improved coating enables speeds to be increased by 50–100%.
    Application: The KC5010 grade is ideal for finishing to general machining of most workpiece materials at higher speeds. Excellent for machining most steels, stainless steels, cast irons, non-ferrous materials, and super alloys under stable conditions. It also performs well machining hardened and short chipping materials.

    P
    S
    M
  • KC5025

    Composition: An advanced PVD-AlTiN-coated grade with a tough, ultra-fine-grain unalloyed substrate.
    Application: For general-purpose machining of most steels, stainless steels, high-temp alloys, titanium, irons, and non-ferrous materials. Speeds may vary from low to medium and will handle interruptions and high feed rates.

    S
    M
  • KC5410

    Composition: A PVD TiB2 coating over a very deformation-resistant unalloyed substrate.
    Application: Designed for roughing, semi-finishing, and finishing of free machining (hypoeutectic <12,2% Si) aluminium, aluminium alloys, and magnesium alloys. The TiB2 coating is harder than TiN and TiAlN coatings and has an extremely smooth surface, resulting in reduced surface friction, speedy chip flow, and outstanding wear resistance. Built-up edge is prevented because this coating has a very low affinity for aluminium. The substrate is unalloyed and fine grained and offers sharp edges, smooth surfaces, and excellent thermal deformation resistance and edge integrity. Inserts with a ground periphery are polished before coating and have a sharp edge. Moulded inserts have a light hone.

    N
  • KCD25
  • KCU10

    Composition: An advanced multilayer PVD coating over a very deformation-resistant unalloyed carbide substrate. The new and improved coating improves edge stability with wide range speed and feed capabilities.
    Application: The KCU10 grade is ideal for finishing to general machining of most workpiece materials at a wide range of speed and feed capabilities. Excellent for machining most steels, stainless steels, cast irons, non-ferrous materials, and super alloys with improved edge toughness and higher cutting speed/feed capability.

    P
    S
    M
  • KCU25

    Turning Composition: An advanced PVD grade with hard AlTiN coating and fine-grain unalloyed substrate. The new and improved coating improves edge stability with wide range speed and feed capabilities.

    Turning Application: The KCU25 grade is ideal for general machining of most steels, stainless steels, high-temp alloys, titanium, irons, and non-ferrous materials in a wide range of speeds and feeds with improved edge toughness for interrupted cut and high feed rates.

    Holemaking Composition: Advanced CVD TiCN-Al2O3 coating combined with a tough carbide substrate.

    Holemaking Application: First choice for steel, stainless steel, and cast iron. This grade offers adequate deformation resistance, excellent edge strength, and superior wear resistance over a wide range of machining conditions for high productivity with very good reliability.

    S
    M