| SAP Material Number | 2268676 |
| ISO Catalog Number | KSSS500ASD43N709-813 |
| ANSI Catalog Number | KSSS500ASD43N709-813 |
| [D1] Effective Cutting Diameter | 127.0000 mm |
| [D1] Effective Cutting Diameter | 5.000 in |
| [D] Adapter / Shank / Bore Diameter | 38.1 mm |
| [D] Adapter / Shank / Bore Diameter | 1.5 in |
| [D6] Hub Diameter | 57.1500 mm |
| [D6] Hub Diameter | 2.250 in |
| [BM] Cutting Width Minimum | 18.0090 mm |
| [BM] Cutting Width Minimum | .7090 in |
| [BMAX] Cutting Width Maximum | 20.6500 mm |
| [BMAX] Cutting Width Maximum | .8130 in |
| [CDX] Radial Maximum Depth of Cut | 33.8070 mm |
| [CDX] Radial Maximum Depth of Cut | 1.331 in |
| [THUB] Hub Thickness | 18.1860 mm |
| [THUB] Hub Thickness | .7160 in |
| Number of Inserts | 8 |
| Number of Effective Cutting Edges on Face | 4 |
| Max RPM | 10300 |
| Weight Pounds | 2.33 |
Slotting: Side| Material Group | Light Machining | General Purpose | Heavy Machining | |||
| – | (Light geometry) | – | (Strong geometry) | |||
| – | wear resistance |  <="" td=""> | toughness | |||
| – | Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | .E..LD2 | KCPM40 | .E..GB2 | KCPM40 | .S..GB2 | KCPM40 |
| P3–P4 | .E..LD2 | KCPM40 | .E..GB2 | KCPK30 | .S..GB2 | KCPK30 |
| P5–P6 | .E..LD2 | KC725M | .E..GB2 | KC725M | .S..GB2 | KC725M |
| M1–M2 | .E..LD2 | KCSM40 | .E..GB2 | KCSM40 | .S..GB2 | KCSM40 |
| M3 | .E..LD2 | KCPM40 | .E..GB2 | KCPM40 | .S..GB2 | KCPM40 |
| K1–K2 | .E..LD2 | KC520M | .E..GB2 | KCK15 | .S..GB2 | KCK15 |
| K3 | .E..LD2 | KC520M | .E..GB2 | KC520M | .S..GB2 | KC520M |
| N1–N2 | .F..LE | KC410M | .F..LE | KC410M | .F..LE | KC410M |
| N3 | .F..LE | KC410M | .F..LE | KC410M | .F..LE | KC410M |
| S1–S2 | .E..LD2 | KC725M | .E..GB2 | KC725M | .S..GB2 | KC725M |
| S3 | .E..LD2 | KCSM40 | .E..GB2 | KCSM40 | .S..GB2 | KCSM40 |
| S4 | .E..LD2 | KCSM40 | .E..GB2 | KCSM40 | .S..GB2 | KCSM40 |
| H1 | – | – | – | – | – | – |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .F..LE | .005 | .017 | .030 | .003 | .012 | .021 | .003 | .009 | .016 | .002 | .008 | .014 | .002 | .007 | .013 | .F..LE |
| .E..LD | .007 | .019 | .032 | .005 | .013 | .023 | .004 | .010 | .017 | .003 | .009 | .015 | .003 | .008 | .014 | .E..LD |
| .E..LD2 | .005 | .018 | .032 | .004 | .013 | .023 | .003 | .010 | .017 | .002 | .009 | .015 | .002 | .008 | .014 | .E..LD2 |
| .E..GB | .009 | .021 | .035 | .007 | .015 | .025 | .005 | .011 | .019 | .004 | .010 | .016 | .004 | .009 | .015 | .E..GB |
| .E..GB2 | .009 | .021 | .035 | .007 | .015 | .025 | .005 | .011 | .019 | .004 | .010 | .016 | .004 | .009 | .015 | .E..GB2 |
| .S..GB | .009 | .023 | .037 | .007 | .017 | .027 | .005 | .013 | .020 | .004 | .011 | .017 | .004 | .010 | .016 | .S..GB |
| .S..GB2 | .009 | .023 | .037 | .007 | .017 | .027 | .005 | .013 | .020 | .004 | .011 | .017 | .004 | .010 | .016 | .S..GB2 |
| .S..GN | .009 | .023 | .037 | .007 | .017 | .027 | .005 | .013 | .020 | .004 | .011 | .017 | .004 | .010 | .016 | .S..GN |
| Light Machining | General Purpose | Heavy Machining |
| Material Group | KC410M | KC520M | KC522M | KC725M | KCK15 | KCPK30 | KCPM20 | |||||||||||||||
| P | 1 | – | – | – | – | – | – | 1080 | 940 | 880 | 860 | 750 | 700 | – | – | – | 1485 | 1300 | 1210 | 1810 | 1590 | 1470 |
| 2 | – | – | – | – | – | – | 900 | 790 | 660 | 720 | 630 | 530 | – | – | – | 920 | 830 | 750 | 1120 | 1010 | 910 | |
| 3 | – | – | – | – | – | – | 830 | 700 | 580 | 660 | 560 | 460 | – | – | – | 830 | 750 | 680 | 1010 | 910 | 830 | |
| 4 | – | – | – | – | – | – | 740 | 610 | 490 | 590 | 490 | 390 | – | – | – | 620 | 575 | 520 | 760 | 700 | 630 | |
| 5 | – | – | – | – | – | – | 610 | 550 | 490 | 490 | 440 | 390 | – | – | – | 850 | 760 | 690 | 910 | 820 | 750 | |
| 6 | – | – | – | – | – | – | 540 | 410 | 330 | 430 | 330 | 260 | – | – | – | 520 | 450 | – | 630 | 550 | 475 | |
| M | 1 | – | – | – | – | – | – | 670 | 590 | 540 | 560 | 490 | 450 | – | – | – | 680 | 600 | 515 | 730 | 655 | 570 |
| 2 | – | – | – | – | – | – | 610 | 520 | 430 | 510 | 430 | 360 | – | – | – | 610 | 530 | 460 | 670 | 580 | 520 | |
| 3 | – | – | – | – | – | – | 460 | 400 | 310 | 380 | 330 | 260 | – | – | – | 475 | 430 | 380 | 530 | 475 | 410 | |
| K | 1 | – | – | – | 880 | 800 | 710 | 750 | 680 | 600 | – | – | – | 1380 | 1255 | 1115 | 965 | 875 | 780 | 1180 | 1070 | 960 |
| 2 | – | – | – | 690 | 620 | 580 | 590 | 530 | 490 | – | – | – | 1095 | 975 | 910 | 770 | 690 | 630 | 940 | 840 | 770 | |
| 3 | – | – | – | 580 | 520 | 470 | 490 | 440 | 400 | – | – | – | 920 | 815 | 750 | 645 | 575 | 530 | 790 | 700 | 650 | |
| N | 1–2 | 3990 | 3550 | 3270 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | 3550 | 3270 | 3000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | 130 | 120 | 90 | 115 | 100 | 80 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | 130 | 120 | 90 | 115 | 100 | 80 | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | 170 | 130 | 90 | 150 | 115 | 80 | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | 230 | 170 | 120 | 200 | 150 | 100 | – | – | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
ISO Catalog Number
ANSI Catalog Number
to find similar products.Please select a file to download
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
