Drill Fix DFSP • KM-TS
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (9)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(9)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(9)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(9)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(9)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(9)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(9)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(9)
- M Stainless Steel (9)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(9)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(9)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(9)
- K Cast Iron (9)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(9)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(9)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(9)
- N Non-Ferrous Materials (9)
- N1Wrought Aluminum (9)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(9)
- N3High-Silicon Aluminum Alloys Si >12.2%(9)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (9)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (9)
- N6Carbon, Graphite Composites, CFRP (9)
- N7MMC's (9)
- S High-Temp Alloys (9)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(9)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(9)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(9)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(9)
- H Hardened Materials (9)
- H1Hardened Materials 44-48 HRC(9)
- H2Hardened Materials 48-55 HRC(9)
- H3Hardened Materials 56-60 HRC(9)
- H4Hardened Materials >60 HRC(9)
Applications
Applications
Convex Drilling (7)
Drilling (7)
Inclined Entry Drilling (7)
Inclined Exit Drilling (7)
X-Offset Drilling (7)
Cutting Diameter
Cutting Diameter
- 0.984 in(1)
- 1.063 in(1)
- 1.125 in(1)
- 1.143 in(2)
- 1.181 in(1)
- 1.299 in(1)
- 1.457 in(1)
- 1.563 in(1)
to
Cutting Diameter
Cutting Diameter
- 25.0 mm(1)
- 27.0 mm(1)
- 28.576 mm(1)
- 29.0 mm(2)
- 30.0 mm(1)
- 33.0 mm(1)
- 37.0 mm(1)
- 39.7 mm(1)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 75.0 mm(1)
- 81.0 mm(1)
- 85.726 mm(1)
- 87.0 mm(2)
- 90.0 mm(1)
- 99.0 mm(1)
- 111.0 mm(1)
- 119.101 mm(1)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 2.953 in(1)
- 3.189 in(1)
- 3.375 in(1)
- 3.426 in(2)
- 3.543 in(1)
- 3.898 in(1)
- 4.37 in(1)
- 4.689 in(1)
to
Reach
Reach
- 3.819 in(1)
- 4.094 in(1)
- 4.213 in(2)
- 4.37 in(1)
- 4.529 in(1)
- 4.764 in(1)
- 5.354 in(1)
- 5.787 in(1)
to
Reach
Reach
- 97.0 mm(1)
- 104.0 mm(1)
- 107.0 mm(2)
- 111.0 mm(1)
- 115.0 mm(1)
- 121.0 mm(1)
- 136.0 mm(1)
- 147.0 mm(1)
to
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (9)
- 2.0 (4)
- 3.0 (9)
- 4.0 (9)
to
Over All Length [L]
Over All Length [L]
- 5.667 in(1)
- 5.944 in(1)
- 6.179 in(1)
- 6.219 in(1)
- 6.494 in(1)
- 6.508 in(1)
- 7.045 in(1)
- 7.439 in(1)
- 8.073 in(1)
to
Over All Length [L]
Over All Length [L]
- 143.951 mm(1)
- 150.951 mm(1)
- 156.951 mm(1)
- 157.951 mm(1)
- 164.951 mm(1)
- 165.3 mm(1)
- 178.951 mm(1)
- 188.951 mm(1)
- 205.025 mm(1)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- CD4 (1)
- CM4 (1)
- CS5 (9)
- KC7140 (9)
- KC720 (9)
- KC7210 (6)
- KC7215 (9)
- KC7225 (9)
- KC7815 (9)
- KC7820 (9)
- KC7935 (9)
- KC810 (9)
- KC990 (9)
- KCMS35 (9)
- KCPK10 (9)
- KCU25 (9)
- KCU40 (9)
- KD1425 (9)
- KM1 (1)
- KMF (9)
- KU40D (9)
Front-End
Insert Shape
Insert Shape
- S-SQUARE 90 (9)
- X-TRIGON 84 (9)
Back-End
System Size
System Size
- KM40TS (4)
- KM50TS (5)
Back-End Diameter
Back-End Diameter
- 40.0 mm(4)
- 50.0 mm(5)
to
Back-End Diameter
Back-End Diameter
- 1.575 in(4)
- 1.969 in(5)
to
No filters matching ""
