D-Clamping
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (9)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(9)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(9)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(9)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(9)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(9)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(9)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(9)
- M Stainless Steel (9)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(9)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(9)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(9)
- K Cast Iron (9)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(9)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(9)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(9)
- N Non-Ferrous Materials (9)
- N1Wrought Aluminum (9)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(9)
- N3High-Silicon Aluminum Alloys Si >12.2%(3)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (9)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (9)
- N6Carbon, Graphite Composites, CFRP (9)
- N7MMC's (9)
- S High-Temp Alloys (9)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(9)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(9)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(9)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(9)
- H Hardened Materials (9)
- H1Hardened Materials 44-48 HRC(9)
- H2Hardened Materials 48-55 HRC(9)
- H3Hardened Materials 56-60 HRC(9)
- H4Hardened Materials >60 HRC(7)
- C CFRP Materials (9)
- C1CFRP, CFRP / CFRP (9)
- C2CFRP / Aluminium CFRP / Non-Ferrous (9)
Applications
Applications
- Facing (4)
- Multiple Direction Cutting (9)
- Profiling (9)
- TRN Boring (6)
- Turning (9)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (9)
- Lightly Interrupted Cut (9)
- Smooth Cut (9)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 93.0 (4)
- 95.0 (4)
- 107.5 (1)
to
Connection Style
Connection Style
- KM (3)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (3)
- 2.0 (9)
- 4.0 (9)
- 8.0 (4)
to
Internal Coolant Capability
Internal Coolant Capability
Corner Radius
Corner Radius
- 0.004 in(7)
- 0.008 in(3)
- 0.014 in(4)
- 0.016 in(9)
- 0.031 in(9)
- 0.047 in(9)
- 0.062 in(2)
- 0.063 in(9)
- 0.094 in(3)
- 0.095 in(2)
- 0.126 in(2)
to
Corner Radius
Corner Radius
- 0.1 mm(7)
- 0.2 mm(3)
- 0.351 mm(4)
- 0.4 mm(9)
- 0.8 mm(9)
- 1.201 mm(9)
- 1.576 mm(2)
- 1.6 mm(9)
- 2.375 mm(3)
- 2.401 mm(2)
- 3.2 mm(2)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- 13E (9)
- 241 (2)
- CL4 (6)
- CM2 (9)
- CM3 (6)
- CM4 (4)
- CPX (9)
- CW2 (6)
- GX (2)
- HT2 (6)
- HTX (2)
- K060 (3)
- K090 (9)
- K1 (2)
- K10M (9)
- K10P (9)
- K10U (7)
- K15U (7)
- K20K (9)
- K21 (2)
- K25M (9)
- K25P (7)
- K313 (9)
- K35P (7)
- K420 (5)
- K45 (3)
- K68 (9)
- KB1340 (2)
- KB1345 (3)
- KB1610 (3)
- KB1625 (3)
- KB1630 (3)
- KB5610 (3)
- KB5625 (3)
- KB5630 (3)
- KB9610 (7)
- KB9640 (2)
- KBH10 (7)
- KBH10B (7)
- KBH20 (7)
- KBH20B (7)
- KBK35 (2)
- KC210 (7)
- KC250 (5)
- KC5010 (9)
- KC5025 (9)
- KC5410 (9)
- KC5510 (9)
- KC5525 (7)
- KC710 (2)
- KC720 (5)
- KC722 (2)
- KC730 (5)
- KC7310 (9)
- KC732 (5)
- KC8050 (9)
- KC810 (9)
- KC850 (9)
- KC9010 (9)
- KC9025 (9)
- KC910 (9)
- KC9105 (9)
- KC9110 (9)
- KC9120 (9)
- KC9125 (9)
- KC9140 (9)
- KC9145 (9)
- KC9210 (4)
- KC9215 (9)
- KC9225 (9)
- KC9240 (9)
- KC9240NEW (9)
- KC9245 (9)
- KC9315 (9)
- KC9320 (9)
- KC9325 (9)
- KC935 (9)
- KC950 (9)
- KC990 (9)
- KCD25 (1)
- KCK05 (9)
- KCK05B (9)
- KCK15 (9)
- KCK15B (9)
- KCK20 (9)
- KCK20B (9)
- KCM15 (9)
- KCM15B (9)
- KCM25 (9)
- KCM25B (9)
- KCM35 (9)
- KCM35B (8)
- KCP05 (9)
- KCP05B (7)
- KCP10 (9)
- KCP10B (9)
- KCP25 (9)
- KCP25B (9)
- KCP25C (9)
- KCP30 (9)
- KCP30B (9)
- KCP40 (9)
- KCP40B (9)
- KCPK05 (9)
- KCS10 (2)
- KCS10B (9)
- KCU10 (9)
- KCU10B (9)
- KCU25 (9)
- KCU25B (9)
- KD050 (3)
- KD081 (3)
- KD100 (3)
- KD120 (3)
- KD1400 (3)
- KD1405 (3)
- KD1425 (3)
- KM1 (2)
- KMF (2)
- KS15 (2)
- KT1120 (2)
- KT125 (7)
- KT150 (3)
- KT175 (7)
- KT315 (7)
- KT325 (6)
- KTP10 (7)
- KTP25S (7)
- KU10T (7)
- KU30T (9)
- KY1310 (5)
- KY1320 (9)
- KY1540 (3)
- KY1615 (9)
- KY2000 (5)
- KY2100 (3)
- KY3000 (9)
- KY3400 (5)
- KY3500 (9)
- KY4000 (4)
- KY4300 (5)
- KY4400 (9)
- KYHK15B (9)
- KYK10 (3)
- KYK25 (5)
- KYK35 (9)
- KYS25 (3)
- KYS30 (3)
- NL200 (6)
- NL250 (9)
- NL300 (8)
- NL400 (4)
- NL920 (7)
- P25 (2)
- PS5 (6)
- SP0819 (8)
- SP3019 (4)
- SP4019 (5)
- X00511 (2)
- X00580 (2)
- X00581 (2)
- X00582 (2)
- X00583 (2)
- X00584 (2)
- X00585 (2)
- X00586 (2)
- X00591 (2)
- X00592 (2)
- X00593 (2)
- X00594 (2)
- X00596 (2)
- X00597 (2)
- X00599 (2)
Hand Of Tool
Hand Of Tool
- L (1)
- R (2)
Wiper Insert
Wiper Insert
- N (9)
- Y (6)
F Dimension
F Dimension
- 53.0 mm(3)
to
F Dimension
F Dimension
- 2.087 in(3)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 106.0 mm(6)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 4.173 in(6)
to
Cutting Direction
Cutting Direction
- S (3)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (3)
Maximum Bore Depth
Maximum Bore Depth
- 2.757 in(6)
to
Maximum Bore Depth
Maximum Bore Depth
- 70.0 mm(6)
to
Front-End
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (4)
- D-DIAMOND/RHOMBIC 55 (5)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (3)
- B L (7)
- C A (9)
- C N (9)
- D P (7)
- H T (7)
- H W (9)
Back-End
Connection Type
Connection Type
- TAPER SHANK (3)
System Size
System Size
- KM80TS (3)
No filters matching ""