Screw-On • S-Style Clamping • For Positive Style Inserts

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (177)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(177)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(177)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(177)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(177)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(177)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(177)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(177)
    • M Stainless Steel (177)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(177)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(177)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(177)
    • K Cast Iron (177)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(177)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(177)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(177)
    • N Non-Ferrous Materials (177)
      • N1
        Wrought Aluminum (177)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(177)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(133)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (177)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (177)
      • N6
        Carbon, Graphite Composites, CFRP (177)
      • N7
        MMC's (138)
    • S High-Temp Alloys (177)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(177)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(177)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(177)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(177)
    • H Hardened Materials (138)
      • H1
        Hardened Materials 44-48 HRC(138)
      • H2
        Hardened Materials 48-55 HRC(138)
      • H3
        Hardened Materials 56-60 HRC(133)
      • H4
        Hardened Materials >60 HRC(133)
    • C CFRP Materials (171)
      • C1
        CFRP, CFRP / CFRP (171)
      • C2
        CFRP / Aluminium CFRP / Non-Ferrous (138)
    Select First Choice
    • US (7)
    Applications
    Applications
    • FacingFacing (16)
    • ID FacingID Facing (1)
    • Multiple Direction CuttingMultiple Direction Cutting (174)
    • ProfilingProfiling (159)
    • TRN BoringTRN Boring (166)
    • TurningTurning (16)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (113)
    • Lightly Interrupted Cut (177)
    • Smooth Cut (177)
    • Varying Depth of Cut (173)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (32)
    • 93.0 (31)
    • 95.0 (110)
    • 97.0 (4)
    Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Boring Bar Shank (162)
    • KM (15)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (133)
    • 2.0 (113)
    • 3.0 (64)
    • 4.0 (43)
    Cutting Edges Per Insert MintoCutting Edges Per Insert Max
    Over All Length [L]
    Over All Length [L]
    • 2.375 in(2)
    • 2.5 in(2)
    • 2.75 in(1)
    • 3.0 in(1)
    • 3.15 in(2)
    • 3.375 in(2)
    • 3.543 in(4)
    • 3.938 in(1)
    • 3.95 in(4)
    • 3.96 in(3)
    • 4.0 in(15)
    • 4.331 in(5)
    • 4.375 in(1)
    • 4.851 in(2)
    • 4.852 in(2)
    • 4.892 in(1)
    • 4.912 in(1)
    • 5.0 in(5)
    • 5.513 in(4)
    • 5.876 in(1)
    • 5.906 in(1)
    • 5.955 in(4)
    • 6.0 in(41)
    • 7.037 in(1)
    • 7.057 in(2)
    • 7.087 in(2)
    • 7.136 in(2)
    • 7.875 in(2)
    • 7.931 in(2)
    • 7.974 in(2)
    • 8.0 in(12)
    • 9.9 in(5)
    • 10.0 in(32)
    • 12.0 in(10)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 60.325 mm(2)
    • 63.5 mm(2)
    • 69.851 mm(1)
    • 76.2 mm(1)
    • 80.0 mm(2)
    • 85.726 mm(2)
    • 90.0 mm(4)
    • 100.0 mm(1)
    • 100.325 mm(4)
    • 100.575 mm(3)
    • 101.601 mm(15)
    • 110.0 mm(5)
    • 111.125 mm(1)
    • 123.2 mm(2)
    • 123.25 mm(2)
    • 124.25 mm(1)
    • 124.75 mm(1)
    • 127.0 mm(5)
    • 140.0 mm(4)
    • 149.25 mm(1)
    • 150.0 mm(1)
    • 151.25 mm(4)
    • 152.4 mm(41)
    • 178.75 mm(1)
    • 179.25 mm(2)
    • 180.0 mm(2)
    • 181.25 mm(2)
    • 200.0 mm(2)
    • 201.451 mm(2)
    • 202.55 mm(2)
    • 203.201 mm(12)
    • 251.451 mm(5)
    • 254.0 mm(32)
    • 304.8 mm(10)
    Over All Length [L] MintoOver All Length [L] Max
    Corner configuration
    Corner Radius
    Corner Radius
    • 0.0 in(5)
    • 0.001 in(9)
    • 0.002 in(64)
    • 0.004 in(101)
    • 0.007 in(55)
    • 0.008 in(113)
    • 0.015 in(55)
    • 0.016 in(118)
    • 0.031 in(115)
    • 0.047 in(33)
    • 0.063 in(5)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(5)
    • 0.025 mm(9)
    • 0.05 mm(64)
    • 0.1 mm(101)
    • 0.176 mm(55)
    • 0.2 mm(113)
    • 0.375 mm(55)
    • 0.4 mm(118)
    • 0.775 mm(12)
    • 0.8 mm(103)
    • 1.201 mm(33)
    • 1.6 mm(5)
    Corner Radius MintoCorner Radius Max
    Application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • CG5 (7)
    • CG6 (3)
    • CM1 (7)
    • HT2 (9)
    • HTX (9)
    • K00379 (54)
    • K10M (4)
    • K10P (4)
    • K10U (9)
    • K15U (9)
    • K20K (4)
    • K25M (4)
    • K313 (143)
    • K420 (42)
    • K68 (101)
    • KB1345 (33)
    • KB1610 (71)
    • KB1625 (15)
    • KB1630 (50)
    • KB5610 (63)
    • KB5625 (69)
    • KB5630 (42)
    • KB9610 (70)
    • KBH10 (9)
    • KBH20 (78)
    • KC250 (46)
    • KC5010 (177)
    • KC5025 (172)
    • KC5410 (99)
    • KC710 (80)
    • KC720 (99)
    • KC730 (172)
    • KC7310 (26)
    • KC732 (96)
    • KC8050 (99)
    • KC810 (101)
    • KC850 (118)
    • KC9010 (81)
    • KC9025 (112)
    • KC910 (101)
    • KC9105 (86)
    • KC9110 (110)
    • KC9120 (83)
    • KC9125 (110)
    • KC9225 (110)
    • KC9240 (102)
    • KC9240NEW (99)
    • KC9315 (110)
    • KC9320 (84)
    • KC9325 (78)
    • KC935 (160)
    • KC950 (86)
    • KC990 (96)
    • KCD25 (91)
    • KCK05 (105)
    • KCK05B (17)
    • KCK15 (81)
    • KCK15B (83)
    • KCK20 (105)
    • KCK20B (91)
    • KCM15 (97)
    • KCM15B (54)
    • KCM25 (113)
    • KCM25B (83)
    • KCM25S (9)
    • KCM35 (37)
    • KCM35B (5)
    • KCP05 (94)
    • KCP05B (5)
    • KCP10 (107)
    • KCP10B (99)
    • KCP20S (9)
    • KCP25 (113)
    • KCP25B (102)
    • KCP25C (110)
    • KCP30 (71)
    • KCP30B (5)
    • KCPK05 (21)
    • KCS10 (113)
    • KCS10B (87)
    • KCS25S (9)
    • KCU10 (166)
    • KCU10B (171)
    • KCU25 (155)
    • KCU25B (170)
    • KD050 (51)
    • KD081 (63)
    • KD100 (109)
    • KD105 (47)
    • KD120 (42)
    • KD1400 (133)
    • KD1405 (55)
    • KD1425 (133)
    • KN10S (9)
    • KT125 (46)
    • KT150 (46)
    • KT175 (94)
    • KT315 (166)
    • KT325 (9)
    • KTP10 (94)
    • KTP25S (9)
    • KU10 (68)
    • KU10T (91)
    • KU30T (78)
    • SPM5F2 (42)
    • SPMQMA (20)
    • W00162 (4)
    • WBH10C (4)
    • WBH10P (11)
    • WBH10U (11)
    • WBH25P (13)
    • WBH30P (11)
    • WDN00U (12)
    • WDN25U (15)
    • WK20CT (13)
    • WM15CT (13)
    • WM25CT (11)
    • WP15CT (11)
    • WP25CT (15)
    Hand Of Tool
    Hand Of Tool
    • L (62)
    • R (115)
    Wiper Insert
    Wiper Insert
    • N (177)
    • Y (61)
    F Dimension
    F Dimension
    • 2.401 mm(4)
    • 2.651 mm(5)
    • 2.825 mm(3)
    • 2.975 mm(4)
    • 3.026 mm(6)
    • 3.176 mm(1)
    • 3.2 mm(2)
    • 3.426 mm(2)
    • 3.625 mm(1)
    • 3.676 mm(7)
    • 3.7 mm(2)
    • 3.725 mm(5)
    • 3.85 mm(2)
    • 3.95 mm(5)
    • 4.425 mm(2)
    • 4.7 mm(5)
    • 4.75 mm(3)
    • 4.801 mm(2)
    • 5.351 mm(1)
    • 5.575 mm(6)
    • 5.601 mm(1)
    • 5.801 mm(1)
    • 5.875 mm(4)
    • 6.351 mm(10)
    • 6.551 mm(1)
    • 6.601 mm(1)
    • 6.875 mm(5)
    • 6.926 mm(1)
    • 7.0 mm(2)
    • 7.926 mm(9)
    • 8.875 mm(5)
    • 9.0 mm(6)
    • 9.525 mm(2)
    • 10.3 mm(10)
    • 10.326 mm(2)
    • 10.875 mm(4)
    • 11.0 mm(7)
    • 11.101 mm(2)
    • 12.701 mm(14)
    • 12.875 mm(5)
    • 13.0 mm(4)
    • 14.275 mm(3)
    • 15.875 mm(2)
    • 16.25 mm(6)
    • 19.05 mm(2)
    F Dimension MintoF Dimension Max
    F Dimension
    F Dimension
    • 0.095 in(4)
    • 0.105 in(5)
    • 0.111 in(3)
    • 0.117 in(4)
    • 0.12 in(6)
    • 0.125 in(1)
    • 0.126 in(2)
    • 0.135 in(2)
    • 0.144 in(1)
    • 0.145 in(7)
    • 0.146 in(2)
    • 0.147 in(5)
    • 0.152 in(2)
    • 0.156 in(5)
    • 0.175 in(2)
    • 0.185 in(5)
    • 0.187 in(3)
    • 0.189 in(2)
    • 0.211 in(1)
    • 0.219 in(6)
    • 0.221 in(1)
    • 0.228 in(1)
    • 0.231 in(4)
    • 0.25 in(10)
    • 0.258 in(1)
    • 0.26 in(1)
    • 0.271 in(5)
    • 0.273 in(1)
    • 0.276 in(2)
    • 0.312 in(9)
    • 0.35 in(5)
    • 0.354 in(6)
    • 0.375 in(2)
    • 0.406 in(10)
    • 0.408 in(2)
    • 0.428 in(4)
    • 0.433 in(7)
    • 0.437 in(2)
    • 0.5 in(14)
    • 0.507 in(5)
    • 0.512 in(4)
    • 0.562 in(3)
    • 0.625 in(2)
    • 0.64 in(6)
    • 0.75 in(2)
    F Dimension MintoF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 4.575 mm(4)
    • 5.275 mm(5)
    • 5.551 mm(3)
    • 5.7 mm(4)
    • 5.95 mm(7)
    • 6.601 mm(1)
    • 6.775 mm(2)
    • 6.9 mm(1)
    • 6.976 mm(2)
    • 7.051 mm(1)
    • 7.075 mm(1)
    • 7.101 mm(4)
    • 7.25 mm(8)
    • 7.426 mm(2)
    • 7.525 mm(3)
    • 8.15 mm(2)
    • 8.8 mm(2)
    • 9.05 mm(4)
    • 9.1 mm(4)
    • 9.15 mm(1)
    • 9.201 mm(1)
    • 10.5 mm(1)
    • 10.55 mm(6)
    • 10.951 mm(1)
    • 11.0 mm(4)
    • 11.125 mm(1)
    • 12.201 mm(10)
    • 12.9 mm(1)
    • 13.0 mm(7)
    • 13.675 mm(1)
    • 15.25 mm(11)
    • 16.0 mm(11)
    • 18.55 mm(2)
    • 19.55 mm(12)
    • 20.0 mm(11)
    • 21.6 mm(2)
    • 23.625 mm(10)
    • 24.901 mm(3)
    • 25.0 mm(9)
    • 25.401 mm(2)
    • 30.225 mm(2)
    • 30.475 mm(4)
    • 31.0 mm(2)
    • 33.025 mm(2)
    Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.18 in(4)
    • 0.209 in(5)
    • 0.219 in(3)
    • 0.224 in(4)
    • 0.234 in(7)
    • 0.26 in(1)
    • 0.267 in(2)
    • 0.272 in(1)
    • 0.275 in(2)
    • 0.278 in(1)
    • 0.279 in(1)
    • 0.28 in(4)
    • 0.286 in(8)
    • 0.292 in(2)
    • 0.296 in(3)
    • 0.321 in(2)
    • 0.347 in(2)
    • 0.356 in(4)
    • 0.358 in(4)
    • 0.36 in(1)
    • 0.362 in(1)
    • 0.414 in(1)
    • 0.416 in(6)
    • 0.431 in(1)
    • 0.433 in(4)
    • 0.438 in(1)
    • 0.48 in(10)
    • 0.508 in(1)
    • 0.512 in(7)
    • 0.538 in(1)
    • 0.6 in(11)
    • 0.63 in(11)
    • 0.73 in(2)
    • 0.77 in(12)
    • 0.787 in(11)
    • 0.85 in(2)
    • 0.93 in(10)
    • 0.98 in(3)
    • 0.984 in(9)
    • 1.0 in(2)
    • 1.19 in(2)
    • 1.2 in(4)
    • 1.22 in(2)
    • 1.3 in(2)
    Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • B (110)
    • E (67)
    Rake Angle Style
    Rake Angle Style
    • NEGATIVE-ZERO (81)
    • NEUTRAL (ZERO) (26)
    • POSITIVE-NEGATIVE (4)
    • POSITIVE-ZERO (66)
    Maximum Bore Depth
    Maximum Bore Depth
    • 0.875 in(3)
    • 0.935 in(3)
    • 0.946 in(1)
    • 1.0 in(2)
    • 1.122 in(1)
    • 1.124 in(3)
    • 1.125 in(6)
    • 1.181 in(5)
    • 1.25 in(1)
    • 1.417 in(9)
    • 1.498 in(3)
    • 1.5 in(9)
    • 1.873 in(5)
    • 1.875 in(10)
    • 1.891 in(9)
    • 1.969 in(2)
    • 2.249 in(2)
    • 2.25 in(12)
    • 2.362 in(10)
    • 2.5 in(2)
    • 2.835 in(8)
    • 3.0 in(12)
    • 3.15 in(5)
    • 3.749 in(2)
    • 3.75 in(12)
    • 3.781 in(6)
    • 3.938 in(4)
    • 4.5 in(15)
    • 4.724 in(5)
    • 6.0 in(10)
    Maximum Bore Depth MintoMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 22.225 mm(3)
    • 23.75 mm(3)
    • 24.0 mm(1)
    • 25.401 mm(2)
    • 28.5 mm(1)
    • 28.55 mm(3)
    • 28.576 mm(6)
    • 30.0 mm(5)
    • 31.75 mm(1)
    • 36.0 mm(9)
    • 38.051 mm(3)
    • 38.1 mm(9)
    • 47.575 mm(5)
    • 47.625 mm(10)
    • 48.0 mm(9)
    • 50.0 mm(2)
    • 57.125 mm(2)
    • 57.151 mm(12)
    • 60.0 mm(10)
    • 63.5 mm(2)
    • 72.0 mm(8)
    • 76.2 mm(12)
    • 80.0 mm(5)
    • 95.226 mm(2)
    • 95.25 mm(12)
    • 96.0 mm(6)
    • 100.0 mm(4)
    • 114.301 mm(15)
    • 120.0 mm(5)
    • 152.4 mm(10)
    Maximum Bore Depth MintoMaximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • C (162)
    • S (15)
    Front-End
    Insert Shape
    Insert Shape
    • C-DIAMOND/RHOMBIC 80 (93)
    • D-DIAMOND/RHOMBIC 55 (20)
    • T-TRIANGLE 60 (43)
    • W-TRIGON 80 (21)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.113 in(1)
    • 0.183 in(2)
    • 0.184 in(2)
    Maximum Cutting Depth MintoMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 2.875 mm(1)
    • 4.65 mm(2)
    • 4.675 mm(2)
    Maximum Cutting Depth MintoMaximum Cutting Depth Max
    Insert Geometry
    Cutting Tool Material
    Cutting Tool Material
    • B H (120)
    • B L (145)
    • D P (145)
    • H T (166)
    • H W (177)
    Back-End
    Connection Type
    Connection Type
    • BORING BAR (162)
    • TAPER SHANK (15)
    System Size
    System Size
    • KM50TS (15)
    Back-End Diameter
    Back-End Diameter
    • 3.95 mm(3)
    • 4.0 mm(1)
    • 4.75 mm(10)
    • 5.0 mm(5)
    • 6.0 mm(9)
    • 6.351 mm(12)
    • 7.926 mm(7)
    • 7.95 mm(6)
    • 8.0 mm(9)
    • 9.525 mm(14)
    • 10.0 mm(6)
    • 12.0 mm(12)
    • 12.701 mm(15)
    • 15.875 mm(15)
    • 16.0 mm(8)
    • 19.05 mm(15)
    • 20.0 mm(5)
    • 25.401 mm(10)
    • 50.0 mm(15)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.156 in(3)
    • 0.157 in(1)
    • 0.187 in(10)
    • 0.197 in(5)
    • 0.237 in(9)
    • 0.25 in(12)
    • 0.312 in(7)
    • 0.313 in(6)
    • 0.315 in(9)
    • 0.375 in(14)
    • 0.394 in(6)
    • 0.473 in(12)
    • 0.5 in(15)
    • 0.625 in(15)
    • 0.63 in(8)
    • 0.75 in(15)
    • 0.787 in(5)
    • 1.0 in(10)
    • 1.969 in(15)
    Back-End Diameter MintoBack-End Diameter Max
    Shank Height
    Shank Height
    • 0.449 in(7)
    • 0.606 in(6)
    • 0.764 in(5)
    Shank Height MintoShank Height Max
    Shank Height
    Shank Height
    • 11.4 mm(7)
    • 15.4 mm(6)
    • 19.401 mm(5)
    Shank Height MintoShank Height Max
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO Catalog Number Grade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)