Kenclamp™ • D-Style Clamping • For Negative Style Inserts

Select Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (83)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (83)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (83)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (83)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (83)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (83)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (83)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (83)
  • M Stainless Steel (83)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (83)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (83)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (83)
  • K Cast Iron (83)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (83)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (83)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (83)
  • N Non-Ferrous Materials (83)
    • N1
      Wrought Aluminum (83)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (83)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (52)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (83)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (83)
    • N6
      Carbon, Graphite Composites, CFRP (83)
    • N7
      MMC's (82)
  • S High-Temp Alloys (83)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (83)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (83)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (83)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (83)
  • H Hardened Materials (71)
    • H1
      Hardened Materials 44-48 HRC (71)
    • H2
      Hardened Materials 48-55 HRC (71)
    • H3
      Hardened Materials 56-60 HRC (71)
    • H4
      Hardened Materials >60 HRC (66)
  • C CFRP Materials (83)
    • C1
      CFRP, CFRP / CFRP (83)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous (82)
Select First Choice
  • CN (24)
  • DE (23)
  • GB (6)
  • US (26)
Applications
Applications
  • Back Boring Back Boring (20)
  • Chamfer Turning Chamfer Turning (12)
  • Facing Facing (12)
  • ID Facing ID Facing (12)
  • Multiple Direction Cutting Multiple Direction Cutting (69)
  • Profiling Profiling (66)
  • TRN Boring TRN Boring (80)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (83)
  • Interrupted (66)
  • Lightly Interrupted Cut (83)
  • Smooth Cut (83)
  • Varying Depth of Cut (83)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 62.5 (7)
  • 90.0 (2)
  • 93.0 (23)
  • 95.0 (41)
  • 107.5 (10)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (54)
  • 2.0 (76)
  • 3.0 (5)
  • 4.0 (77)
  • 6.0 (6)
  • 8.0 (43)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Over All Length [L]
Over All Length [L]
  • 7.875 in (10)
  • 9.843 in (14)
  • 10.0 in (2)
  • 11.811 in (12)
  • 12.0 in (8)
  • 13.781 in (2)
  • 14.0 in (24)
  • 16.0 in (11)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 200.0 mm (10)
  • 250.0 mm (14)
  • 254.0 mm (2)
  • 300.0 mm (12)
  • 304.8 mm (8)
  • 350.0 mm (2)
  • 355.6 mm (24)
  • 406.401 mm (11)
Over All Length [L] Min to Over All Length [L] Max
Corner configuration
Corner Radius
Corner Radius
  • 0.004 in (77)
  • 0.008 in (63)
  • 0.014 in (14)
  • 0.016 in (81)
  • 0.024 in (5)
  • 0.031 in (83)
  • 0.047 in (83)
  • 0.062 in (31)
  • 0.063 in (64)
  • 0.094 in (12)
  • 0.095 in (5)
  • 0.126 in (3)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.1 mm (77)
  • 0.2 mm (63)
  • 0.351 mm (14)
  • 0.4 mm (81)
  • 0.601 mm (5)
  • 0.8 mm (83)
  • 1.201 mm (83)
  • 1.576 mm (31)
  • 1.6 mm (64)
  • 2.375 mm (12)
  • 2.401 mm (5)
  • 3.2 mm (3)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (66)
  • 241 (31)
  • CL4 (47)
  • CM2 (64)
  • CM3 (47)
  • CM4 (34)
  • CPX (59)
  • CW2 (45)
  • GX (33)
  • HT2 (55)
  • HTX (31)
  • K060 (40)
  • K090 (66)
  • K1 (33)
  • K10M (72)
  • K10P (73)
  • K10U (66)
  • K15U (66)
  • K20K (72)
  • K21 (33)
  • K25M (81)
  • K25P (69)
  • K313 (82)
  • K35P (31)
  • K420 (52)
  • K45 (47)
  • K68 (66)
  • KB1340 (41)
  • KB1345 (40)
  • KB1610 (52)
  • KB1625 (47)
  • KB1630 (47)
  • KB5610 (52)
  • KB5625 (47)
  • KB5630 (47)
  • KB9610 (66)
  • KB9640 (46)
  • KBH10 (66)
  • KBH10B (61)
  • KBH20 (66)
  • KBH20B (61)
  • KBK35 (31)
  • KC210 (56)
  • KC250 (45)
  • KC5010 (83)
  • KC5025 (82)
  • KC5410 (71)
  • KC5510 (82)
  • KC5525 (70)
  • KC710 (31)
  • KC720 (55)
  • KC722 (31)
  • KC730 (69)
  • KC7310 (83)
  • KC732 (55)
  • KC8050 (83)
  • KC810 (81)
  • KC850 (82)
  • KC9010 (83)
  • KC9025 (83)
  • KC910 (71)
  • KC9105 (82)
  • KC9110 (83)
  • KC9120 (82)
  • KC9125 (83)
  • KC9140 (83)
  • KC9145 (71)
  • KC9210 (14)
  • KC9215 (83)
  • KC9225 (83)
  • KC9240 (83)
  • KC9240NEW (83)
  • KC9245 (83)
  • KC9315 (83)
  • KC9320 (82)
  • KC9325 (82)
  • KC935 (83)
  • KC950 (71)
  • KC990 (83)
  • KCD25 (9)
  • KCK05 (83)
  • KCK05B (81)
  • KCK15 (82)
  • KCK15B (83)
  • KCK20 (82)
  • KCK20B (82)
  • KCM15 (83)
  • KCM15B (83)
  • KCM25 (83)
  • KCM25B (82)
  • KCM35 (72)
  • KCM35B (56)
  • KCP05 (80)
  • KCP05B (77)
  • KCP10 (83)
  • KCP10B (83)
  • KCP25 (83)
  • KCP25B (83)
  • KCP25C (83)
  • KCP30 (83)
  • KCP30B (65)
  • KCP40 (64)
  • KCP40B (73)
  • KCPK05 (81)
  • KCS10 (31)
  • KCS10B (81)
  • KCU10 (83)
  • KCU10B (83)
  • KCU25 (82)
  • KCU25B (82)
  • KD050 (47)
  • KD081 (47)
  • KD100 (47)
  • KD120 (47)
  • KD1400 (52)
  • KD1405 (47)
  • KD1425 (52)
  • KM1 (31)
  • KMF (31)
  • KS15 (31)
  • KT1120 (36)
  • KT125 (61)
  • KT150 (47)
  • KT175 (61)
  • KT315 (78)
  • KT325 (55)
  • KT5020 (7)
  • KTP10 (77)
  • KU10T (77)
  • KU30T (82)
  • KY1310 (48)
  • KY1320 (71)
  • KY1540 (42)
  • KY1615 (66)
  • KY2000 (45)
  • KY2100 (40)
  • KY3000 (66)
  • KY3400 (50)
  • KY3500 (71)
  • KY4000 (41)
  • KY4300 (45)
  • KY4400 (71)
  • KYHK15B (71)
  • KYK10 (45)
  • KYK25 (50)
  • KYK35 (71)
  • KYS25 (42)
  • KYS30 (47)
  • NL200 (45)
  • NL250 (81)
  • NL300 (50)
  • NL400 (41)
  • NL920 (69)
  • P25 (31)
  • PS5 (55)
  • SP0819 (55)
  • SP3019 (41)
  • SP4019 (51)
  • SP4036 (7)
  • SP4093 (7)
  • SPADAP (2)
  • X00511 (31)
  • X00580 (31)
  • X00581 (31)
  • X00582 (31)
  • X00583 (31)
  • X00584 (31)
  • X00585 (31)
  • X00586 (31)
  • X00591 (31)
  • X00592 (31)
  • X00593 (31)
  • X00594 (31)
  • X00596 (31)
  • X00597 (31)
  • X00599 (31)
Hand Of Tool
Hand Of Tool
  • L (34)
  • R (49)
Wiper Insert
Wiper Insert
  • N (83)
  • Y (53)
F Dimension
F Dimension
  • 16.25 mm (6)
  • 17.0 mm (9)
  • 19.05 mm (2)
  • 19.425 mm (4)
  • 22.0 mm (13)
  • 22.6 mm (6)
  • 25.401 mm (6)
  • 25.776 mm (4)
  • 27.0 mm (12)
  • 28.576 mm (6)
  • 30.0 mm (2)
  • 32.525 mm (2)
  • 32.551 mm (3)
  • 34.926 mm (1)
  • 35.0 mm (2)
  • 38.875 mm (2)
  • 38.901 mm (3)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.64 in (6)
  • 0.669 in (9)
  • 0.75 in (2)
  • 0.765 in (4)
  • 0.866 in (13)
  • 0.89 in (6)
  • 1.0 in (6)
  • 1.016 in (4)
  • 1.063 in (12)
  • 1.125 in (6)
  • 1.181 in (2)
  • 1.281 in (2)
  • 1.282 in (3)
  • 1.375 in (1)
  • 1.379 in (2)
  • 1.532 in (5)
F Dimension Min to F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 30.475 mm (6)
  • 32.0 mm (9)
  • 33.025 mm (2)
  • 37.0 mm (1)
  • 37.35 mm (2)
  • 40.0 mm (12)
  • 43.176 mm (2)
  • 43.301 mm (6)
  • 44.7 mm (6)
  • 45.0 mm (2)
  • 50.0 mm (10)
  • 50.801 mm (6)
  • 51.051 mm (4)
  • 52.0 mm (2)
  • 60.95 mm (5)
  • 63.0 mm (2)
  • 63.5 mm (1)
  • 76.95 mm (5)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 1.2 in (6)
  • 1.26 in (9)
  • 1.3 in (2)
  • 1.457 in (1)
  • 1.47 in (2)
  • 1.575 in (12)
  • 1.7 in (2)
  • 1.705 in (6)
  • 1.76 in (6)
  • 1.772 in (2)
  • 1.969 in (10)
  • 2.0 in (6)
  • 2.011 in (4)
  • 2.047 in (2)
  • 2.4 in (5)
  • 2.48 in (2)
  • 2.5 in (1)
  • 3.031 in (5)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (41)
  • E (42)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (76)
  • NEGATIVE-ZERO (7)
Maximum Bore Depth
Maximum Bore Depth
  • 3.938 in (10)
  • 4.0 in (6)
  • 4.992 in (1)
  • 5.0 in (7)
  • 5.039 in (14)
  • 6.0 in (10)
  • 6.299 in (12)
  • 7.0 in (2)
  • 7.875 in (2)
  • 8.0 in (4)
  • 10.0 in (5)
  • 12.5 in (2)
  • 15.0 in (2)
  • 17.5 in (2)
  • 20.0 in (2)
  • 25.0 in (2)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 100.0 mm (10)
  • 101.601 mm (6)
  • 126.801 mm (1)
  • 127.0 mm (7)
  • 128.0 mm (14)
  • 152.4 mm (10)
  • 160.0 mm (12)
  • 177.8 mm (2)
  • 200.0 mm (2)
  • 203.201 mm (4)
  • 254.0 mm (5)
  • 317.5 mm (2)
  • 381.0 mm (2)
  • 444.5 mm (2)
  • 508.0 mm (2)
  • 635.0 mm (2)
Maximum Bore Depth Min to Maximum Bore Depth Max
Front-End
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (37)
  • D-DIAMOND/RHOMBIC 55 (33)
  • V-DIAMOND/RHOMBIC 35 (7)
  • W-TRIGON 80 (6)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • B H (62)
  • B L (66)
  • C A (71)
  • C N (71)
  • D P (66)
  • H T (78)
  • H W (83)
Back-End
Back-End Diameter
Back-End Diameter
  • 25.0 mm (10)
  • 25.401 mm (8)
  • 31.701 mm (1)
  • 31.75 mm (9)
  • 32.0 mm (14)
  • 38.1 mm (12)
  • 40.0 mm (12)
  • 44.45 mm (4)
  • 50.0 mm (2)
  • 50.801 mm (6)
  • 63.5 mm (5)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.984 in (10)
  • 1.0 in (8)
  • 1.248 in (1)
  • 1.25 in (9)
  • 1.26 in (14)
  • 1.5 in (12)
  • 1.575 in (12)
  • 1.75 in (4)
  • 1.969 in (2)
  • 2.0 in (6)
  • 2.5 in (5)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
You are about to add to your My Solutions page. Do you want to proceed?
product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.

The following files are available

Please select a file to download

Models

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service
item(s) successfully added to the cart
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Number Grade    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?