Top Notch • C-Style Clamping • For Ceramic Inserts
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (1)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1)
- K Cast Iron (9)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(9)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(9)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(7)
- N Non-Ferrous Materials (1)
- N1Wrought Aluminum (1)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (1)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1)
- N7MMC's (1)
- S High-Temp Alloys (9)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(9)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(9)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(9)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1)
- H Hardened Materials (9)
- H1Hardened Materials 44-48 HRC(9)
- H2Hardened Materials 48-55 HRC(9)
- H3Hardened Materials 56-60 HRC(9)
- C CFRP Materials (1)
- C2CFRP / Aluminium CFRP / Non-Ferrous (1)
Applications
Applications
Multiple Direction Cutting (9)
Profiling (8)
TRN Boring (9)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (9)
- Lightly Interrupted Cut (9)
- Smooth Cut (9)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (1)
- 95.0 (8)
to
Cutting Edges Per Insert
Cutting Edges Per Insert
- 2.0 (1)
- 4.0 (8)
- 8.0 (2)
to
Over All Length [L]
Over All Length [L]
- 11.811 in(4)
- 14.0 in(2)
- 16.0 in(3)
to
Over All Length [L]
Over All Length [L]
- 300.0 mm(4)
- 355.6 mm(2)
- 406.401 mm(3)
to
Corner Radius
Corner Radius
- 0.031 in(8)
- 0.047 in(8)
- 0.063 in(8)
- 0.25 in(1)
to
Corner Radius
Corner Radius
- 0.8 mm(8)
- 1.201 mm(8)
- 1.6 mm(8)
- 6.351 mm(1)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K060 (2)
- K090 (3)
- K313 (1)
- KY1310 (9)
- KY1320 (9)
- KY1525 (3)
- KY1540 (9)
- KY1615 (9)
- KY2000 (3)
- KY2100 (1)
- KY3000 (3)
- KY3400 (9)
- KY3500 (9)
- KY4000 (2)
- KY4300 (3)
- KY4400 (3)
- KYHK15B (9)
- KYK10 (9)
- KYK25 (9)
- KYK35 (9)
- KYS25 (9)
- KYS30 (9)
- MC2 (1)
- MC3 (1)
- SPB400 (6)
Hand Of Tool
Hand Of Tool
- L (4)
- R (5)
Wiper Insert
Wiper Insert
- N (9)
- Y (6)
F Dimension
F Dimension
- 22.6 mm(2)
- 27.0 mm(4)
- 32.551 mm(3)
to
F Dimension
F Dimension
- 0.89 in(2)
- 1.063 in(4)
- 1.282 in(3)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 55.0 mm(6)
- 59.0 mm(2)
- 65.0 mm(1)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 2.165 in(6)
- 2.323 in(2)
- 2.559 in(1)
to
Maximum Bore Depth
Maximum Bore Depth
- 6.0 in(2)
- 6.299 in(4)
- 8.0 in(3)
to
Maximum Bore Depth
Maximum Bore Depth
- 152.4 mm(2)
- 160.0 mm(4)
- 203.201 mm(3)
to
Front-End
Clamp Style
Clamp Style
- C (3)
- N (6)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (8)
- R-ROUND (1)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- C A (9)
- C N (9)
- H W (1)
Back-End
Back-End Diameter
Back-End Diameter
- 38.1 mm(2)
- 40.0 mm(4)
- 50.801 mm(3)
to
Back-End Diameter
Back-End Diameter
- 1.5 in(2)
- 1.575 in(4)
- 2.0 in(3)
to
No filters matching ""
