CNMG-MG

Grades

• 
  KC5010

  Composition: An advanced PVD AlTiN coating over a very deformation-resistant unalloyed carbide substrate. The new and improved coating enables speeds to be increased by 50–100%.
  Application: The KC5010 grade is ideal for finishing to general machining of most workpiece materials at higher speeds. Excellent for machining most steels, stainless steels, cast irons, non-ferrous materials, and super alloys under stable conditions. It also performs well machining hardened and short chipping materials.

  P Steel

  S High-Temp Alloys

  M Stainless Steel
• 
  KC5410

  • TiB2-PVD coating over a very deformation-resistant unalloyed substrate.
  
  
  • Designed for roughing, semifinishing, and finishing of free machining (hypoeutectic <12,2% Si) aluminum, aluminum alloys, and magnesium alloys.
  
  
  • High hardness and extremely smooth surface, resulting in reduced surface friction, speedy chip flow, and outstanding wear resistance.
  
  
  • Prevents built-up edge because of a very low affinity for aluminum.

  N Non-Ferrous
• 
  KC720

  • TiN-PVD-coated carbide.
  
  
  • Particularly high-impact strength grade.
  
  
  • For all steels, stainless steels, super-alloys, and titanium.
  
  
  • First choice for difficult conditions such as interrupted cutting, unstable clamping, etc.

• KC730

  KC730

  P Steel

  S High-Temp Alloys

  M Stainless Steel
• KC7310

  PVD-TiAIN coated, unalloyed carbide
  Good Wear resistance
  High level of resistance against plastic deformation
  Smaller rounded edges in comparison with CVD grades
  Recommended finishing grade for stainless steel
  
  
  

• KC810

  KC810

• KC850

  composition: A CVD tri-phase coating on an extra-strong, cobalt-enriched
  alloyed substrate.
  application: Designed for heavy cutting of low-, medium-, and high-carbon
  steels, medium hardness alloy and tool steels, stainless steels, and some
  high-temperature alloys. Excellent thermal and mechanical shock resistance
  makes grade KC850 ideally suited for difficult drilling applications.
  Used in inserts for Kendex/Metcut drill bodies.
  

  P Steel

  M Stainless Steel
• KC9010
• KC9025
• KC910
• 
  KC9110

  Composition: Specially engineered, cobalt-enriched carbide grade with thick K-MTCVD-TiCN coating layer, an Al2O3 layer of controlled grain size, and outer layers of TiCN and TiN for maximum abrasion and wear resistance for high-speed machining.
  Application: An excellent finishing to medium machining grade for a variety of workpiece materials including most steels, ferritic and martensitic stainless steels, and cast irons. A balanced combination of deformation resistance and edge toughness. The smooth coating resists built-up edge and microchipping. For rougher cutting, use the KC9125 grade.

• KC9120
• KC9140

  composition. A newly engineered, tough carbide grade with an advance multi-layered TiN-MT-TiCN-Al203-TiN coating.
  Application. For heavy roughing applications of alloy steels where insert edge strength is critical. A specially designed coating ensures excellent interlayer adhesion and long tool length.
  

• KC9145
• KC935

  KC935

• KC950

  KC950

• KC990
• 
  KCP10B

  Composition: A specially engineered cobalt-enriched carbide grade with thick MTCVD-TiCN-Al2O3-TiOCN coating for maximum wear resistance.

  Application: An excellent finishing to medium machining grade for a variety of workpiece materials, including most steels, ferritic, martensitic, and PH stainless steels, and cast irons. The cobalt-enriched substrate offers a balanced combination of deformation resistance and edge toughness, while the thick coating layers offer outstanding abrasion resistance and crater wear resistance for high-speed machining. Smooth coating provides resistance to edge build-up and microchipping and produces excellent surface finishes.

  P Steel

  K Cast Iron
• 
  KCP25B

  Composition: A tough cobalt-enriched carbide grade with a newly designed multilayer MTCVD-TiCN-Al2O3-TiOCN coating with superior interlayer adhesion.

  Application: Best general-purpose turning grade for most steels and ferritic and martensitic stainless steels. The substrate design ensures adequate deformation resistance with excellent insert edge strength. Coating layers offer good wear resistance over a wide range of machining conditions and the post-coat treatment minimises microchipping and improves coating adhesion to substrate leading to long tool life and improved workpiece finishes.

  P Steel

  K Cast Iron