| SAP Material Number | 6625743 |
| ISO Catalog Number | KSDB1600X6BQX |
| ANSI Catalog Number | KSDB1600X6BQX |
| Grade | KC643M |
| Adapter Style Machine Side | DUO-LOCK |
| [D1] Effective Cutting Diameter | 16.0000 mm |
| [D1] Effective Cutting Diameter | .6299 in |
| [D] Adapter / Shank / Bore Diameter | 15.5 mm |
| [D] Adapter / Shank / Bore Diameter | .6102 in |
| [AP1MAX] 1st Maximum Cutting Depth | 0.8400 mm |
| [AP1MAX] 1st Maximum Cutting Depth | .0331 in |
| [L1] Gage Length | 28.0000 mm |
| [L1] Gage Length | 1.102 in |
| [CSMS] System Size Machine Side | DL16 |
| [WF] Width of Flat | 13.0000 mm |
| [WF] Width of Flat | .5118 in |
| [Re] Corner Radius | 1.0000 mm |
| [Re] Corner Radius | .0394 in |
| [Z] Number of Flutes | 6 |
Ramping: Blank
3D Profiling
Corner Style: Torus
Helix Angle: 20°
Tool Dimensions: Flute Configuration: 6
Shank: Duo-Lock Coupling
Coated fine-grain grade with PVD multilayer (AlTiN). KC643M™ is a very thin and hard PVD coating particularly suited for cutting steel, cast iron, stainless steel (wet), and titanium (wet). This grade can be used for materials with hardness up to 52 HRC.
| Geometrical Parameters | ramping guide for circular and linear interpolation | |||||||||||||||
| Circular Interpolation | linear interpolation | |||||||||||||||
| allowed range of hole diameter | Calculated Length per Ramp Angle | |||||||||||||||
| catalog number | D1 | Ap1 max | Rfm | Rt | Rc | Xfm | Yfm | YD | number of flutes | Smallest | Largest | 1º | 2º | 3º | 4º | 5º |
| KSDB1000X6BQX | 10,00 | 0,53 | 10,00 | 1,04 | 0,625 | 0,53 | 1,25 | 2,20 | 6 | 14,40 | 20,00 | 30,20 | 15,09 | 10,06 | 7,54 | 6,02 |
| KSDB1200X6BQX | 12,00 | 0,63 | 12,00 | 1,24 | 0,750 | 0,63 | 1,50 | 2,64 | 6 | 17,28 | 24,00 | 36,24 | 18,11 | 12,07 | 9,05 | 7,23 |
| KSDB1600X6BQX | 16,00 | 0,84 | 16,00 | 1,66 | 1,000 | 0,84 | 2,00 | 3,52 | 6 | 23,04 | 32,00 | 48,31 | 24,15 | 16,09 | 12,06 | 9,64 |
| KSDB2000X6BQX | 20,00 | 1,05 | 20,00 | 2,07 | 1,250 | 1,05 | 2,50 | 4,40 | 6 | 28,80 | 40,00 | 60,39 | 30,19 | 20,11 | 15,08 | 12,05 |
| recommended degree of programmed feed rate to use while ramping | 100% | 70% | 50% | 30% | 10% | |||||||||||
ISO Catalog Number
ANSI Catalog Number
to find similar products.Please select a file to download
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
