Back to Solution
Editing Solution
Adding Solution
Solution Name: {{SolutionName}}
DUO-LOCK™ • KenCut™ CM • Multi-Flute • Metric
Modular End Milling • XADA Style
Features and benefits
- Modular end mill for chamfering applications in steels and stainless steels.
- Non-centre cutting.
Uses and application
Side Milling/Shoulder Milling: Eased Chamfer
Helix Angle: 0°
Tool Dimensions: Flute Configuration: X (variable)
Workpiece Materials
P
Steel
M
Stainless Steel
K
Cast Iron
N
Non-Ferrous
S
High-Temp Alloys
H
Hardened Materials
Filters and Columns
Filters
Filters
Filters
View filters in
Metric
Inch
Workpiece Material
Workpiece Material
-
P Steel (6)
-
P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(6)
-
P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(6)
-
P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(6)
-
P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(6)
-
P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(6)
-
P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(6)
-
P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(6)
-
-
M Stainless Steel (6)
-
M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(6)
-
M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(6)
-
M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(6)
-
-
K Cast Iron (6)
-
K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(6)
-
K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(6)
-
K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(6)
-
-
N Non-Ferrous Materials (6)
-
N1Wrought Aluminum(6)
-
N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(6)
-
N3High-Silicon Aluminum Alloys Si >12.2%(6)
-
N4Copper, Brass, Zinc-based on machinability index range of 70-100(6)
-
N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass(6)
-
N6Carbon, Graphite Composites, CFRP(6)
-
N7MMC's(6)
-
-
S High-Temp Alloys (6)
-
S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(6)
-
S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(6)
-
S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(6)
-
S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(6)
-
-
H Hardened Materials (6)
-
H1Hardened Materials 44-48 HRC(6)
-
Maximum Cutting Diameter
Maximum Cutting Diameter
-
10.0 mm (2)
-
12.0 mm (2)
-
16.0 mm (2)
to
Maximum Cutting Diameter
Maximum Cutting Diameter
-
0.394 in (2)
-
0.473 in (2)
-
0.63 in (2)
to
Cutting Length
Cutting Length
-
2.0 mm (2)
-
3.0 mm (2)
-
4.0 mm (2)
to
Cutting Length
Cutting Length
-
0.079 in (2)
-
0.119 in (2)
-
0.157 in (2)
to
Reach
Reach
-
0.89 in (2)
-
1.071 in (2)
-
1.417 in (1)
-
1.427 in (1)
to
Reach
Reach
-
22.6 mm (2)
-
27.201 mm (2)
-
36.0 mm (1)
-
36.25 mm (1)
to
Tool Cutting Edge Angle
Tool Cutting Edge Angle
-
45.0 (3)
-
60.0 (3)
to
Number of Flutes
Number of Flutes
-
4 (2)
-
5 (2)
-
6 (2)
Corner Chamfer
Corner Chamfer
-
0.0 mm (3)
-
2.0 mm (1)
-
3.0 mm (1)
-
4.0 mm (1)
to
Corner Chamfer
Corner Chamfer
-
0.0 in (3)
-
0.079 in (1)
-
0.119 in (1)
-
0.157 in (1)
to
Back-End
Back-End Diameter
Back-End Diameter
-
9.601 mm (2)
-
11.5 mm (2)
-
15.5 mm (2)
to
Back-End Diameter
Back-End Diameter
-
0.378 in (2)
-
0.453 in (2)
-
0.61 in (2)
to
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying
1- 6
of 6 results
Metric
Inch
Show
Metric
Inch
| SAP Material Number | ISO Catalog Number | ANSI Catalog Number | Grade | Adapter Style Machine Side | [D1MAX] Maximum Cutting Diameter | [D1MAX] Maximum Cutting Diameter | [D1] Effective Cutting Diameter | [D1] Effective Cutting Diameter | [D] Adapter / Shank / Bore Diameter | [D] Adapter / Shank / Bore Diameter | [AP1MAX] 1st Maximum Cutting Depth | [AP1MAX] 1st Maximum Cutting Depth | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 6127404 | XADA1000X4CH45 | XADA1000X4CH45 | KCPM15 | DUO-LOCK | 10.0000 | .3937 | 0.5000 | .0197 | 9.6 | .378 | 2.0000 | .0787 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$117.90
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6408009 | XADA1000X4CH60 | XADA1000X4CH60 | KCPM15 | DUO-LOCK | 10.0000 | .3937 | 0.5000 | .0197 | 9.6 | .378 | 2.0000 | .0787 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$117.90
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6127405 | XADA1200X5CH45 | XADA1200X5CH45 | KCPM15 | DUO-LOCK | 12.0000 | .4724 | 0.5000 | .0197 | 11.5 | .4528 | 3.0000 | .1181 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$145.19
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6408010 | XADA1200X5CH60 | XADA1200X5CH60 | KCPM15 | DUO-LOCK | 12.0000 | .4724 | 0.5000 | .0197 | 11.5 | .4528 | 3.0000 | .1181 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$145.19
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6127406 | XADA1600X6CH45 | XADA1600X6CH45 | KCPM15 | DUO-LOCK | 16.0000 | .6299 | 0.5000 | .0197 | 15.5 | .6102 | 4.0000 | .1575 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$284.38
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6408041 | XADA1600X6CH60 | XADA1600X6CH60 | KCPM15 | DUO-LOCK | 16.0000 | .6299 | 0.5000 | .0197 | 15.5 | .6102 | 4.0000 | .1575 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$284.38
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
Discount: %
Replacement
This item is no longer available
Replacement Product Please contact customer service for assistance
Replacement Product Please contact customer service for assistance
Qty
Sold in pkg. of
Grades
-
KCPM15
Coated carbide grade with thick PVD coating and optimized chemistry and process for increased wear resistance. Outstanding protection in milling stainless steel to mitigate crater, DOCN (depth-of-cut notching), and flank wear. Excellent performance up to 52 HRC.
P SteelS High-Temp AlloysH Hardened MaterialsK Cast IronM Stainless SteelN Non-Ferrous
| End Mill Tolerances | |
| D1 | tolerance h10 + / - |
| 10–18 | 0/-0,070 |
XADA • Metric
| Material Group |  <="" td=""> |  <="" td=""> | short | medium | long | Recommended feed per tooth (fz = mm/th) for side milling (A). | ||||||||||
| adapter reach | D1 Diameter | |||||||||||||||
| KCPM15 | KCPM15 | KCPM15 | ||||||||||||||
| A | Cutting Speed vc m/min | Cutting Speed vc m/min | Cutting Speed vc m/min | |||||||||||||
| ap | ae | Min | Max | Min | Max | Min | Max | mm | 10,0 | 12,0 | 16,0 | |||||
| P | 0 | 0,35 x D | 0,35 x D | 150 | – | 200 | 135 | – | 180 | 135 | – | 180 | fz | 0,058 | 0,066 | 0,081 |
| 1 | 0,35 x D | 0,35 x D | 150 | – | 200 | 135 | – | 180 | 135 | – | 180 | fz | 0,058 | 0,066 | 0,081 | |
| 2 | 0,35 x D | 0,35 x D | 140 | – | 190 | 126 | – | 171 | 126 | – | 171 | fz | 0,058 | 0,066 | 0,081 | |
| 3 | 0,35 x D | 0,35 x D | 120 | – | 160 | 108 | – | 144 | 108 | – | 144 | fz | 0,048 | 0,056 | 0,070 | |
| 4 | 0,35 x D | 0,35 x D | 90 | – | 150 | 81 | – | 135 | 81 | – | 135 | fz | 0,043 | 0,050 | 0,061 | |
| 5 | 0,35 x D | 0,35 x D | 60 | – | 100 | 51 | – | 85 | 48 | – | 80 | fz | 0,039 | 0,045 | 0,056 | |
| 6 | 0,35 x D | 0,35 x D | 50 | – | 75 | 42,5 | – | 63,75 | 40 | – | 60 | fz | 0,032 | 0,037 | 0,046 | |
| M | 1 | 0,35 x D | 0,35 x D | 90 | – | 115 | 72 | – | 92 | 63 | – | 80,5 | fz | 0,048 | 0,056 | 0,070 |
| 2 | 0,35 x D | 0,35 x D | 60 | – | 80 | 48 | – | 64 | 42 | – | 56 | fz | 0,039 | 0,045 | 0,056 | |
| 3 | 0,35 x D | 0,35 x D | 60 | – | 70 | 48 | – | 56 | 42 | – | 49 | fz | 0,032 | 0,037 | 0,046 | |
| K | 1 | 0,35 x D | 0,35 x D | 120 | – | 150 | 108 | – | 135 | 108 | – | 135 | fz | 0,058 | 0,066 | 0,081 |
| 2 | 0,35 x D | 0,35 x D | 110 | – | 140 | 99 | – | 126 | 99 | – | 126 | fz | 0,048 | 0,056 | 0,070 | |
| 3 | 0,35 x D | 0,35 x D | 110 | – | 130 | 99 | – | 117 | 99 | – | 117 | fz | 0,039 | 0,045 | 0,056 | |
| N | 1 | 0,35 x D | 0,35 x D | 500 | – | 2000 | 400 | – | 1600 | 300 | – | 1200 | fz | 0,080 | 0,096 | 0,128 |
| 2 | 0,35 x D | 0,35 x D | 500 | – | 1500 | 400 | – | 1200 | 300 | – | 900 | fz | 0,072 | 0,086 | 0,115 | |
| 3 | 0,35 x D | 0,35 x D | 500 | – | 1500 | 400 | – | 1200 | 300 | – | 900 | fz | 0,056 | 0,067 | 0,090 | |
| 4 | 0,35 x D | 0,35 x D | 400 | – | 750 | 320 | – | 600 | 240 | – | 450 | fz | 0,056 | 0,067 | 0,090 | |
| 5 | 0,35 x D | 0,35 x D | 250 | – | 1000 | 200 | – | 800 | 150 | – | 600 | fz | 0,072 | 0,086 | 0,115 | |
| 6 | 0,35 x D | 0,35 x D | 100 | – | 750 | 80 | – | 600 | 60 | – | 450 | fz | 0,080 | 0,096 | 0,128 | |
| 7 | 0,35 x D | 0,35 x D | 100 | – | 750 | 80 | – | 600 | 60 | – | 450 | fz | 0,056 | 0,067 | 0,090 | |
| S | 1 | 0,35 x D | 0,35 x D | 50 | – | 90 | 40 | – | 72 | 30 | – | 54 | fz | 0,048 | 0,056 | 0,070 |
| 2 | 0,35 x D | 0,35 x D | 25 | – | 40 | 20 | – | 32 | 15 | – | 24 | fz | 0,026 | 0,030 | 0,037 | |
| 3 | 0,35 x D | 0,35 x D | 25 | – | 40 | 20 | – | 32 | 15 | – | 24 | fz | 0,026 | 0,030 | 0,037 | |
| 4 | 0,35 x D | 0,35 x D | 50 | – | 60 | 40 | – | 48 | 30 | – | 36 | fz | 0,036 | 0,041 | 0,051 | |
| H | 1 | 0,35 x D | 0,35 x D | 80 | – | 140 | 64 | – | 112 | 48 | – | 84 | fz | 0,043 | 0,050 | 0,061 |